Re: [PATCH] usb: musb: Disable pullup in gadget setup

[Bin Liu]

Hi Paul,

On Thu, Apr 04, 2019 at 11:10:46AM -0500, Bin Liu wrote:
> On Thu, Apr 04, 2019 at 11:37:43AM +0200, Paul Cercueil wrote:
> > The pullup may be already enabled before the driver is initialized.
> > It has to be disabled at init time, as we cannot guarantee that a gadget
> > driver will be bound to the UDC.
> > 
> > Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/usb/musb/musb_gadget.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> > index ffe462a657b1..094dc59c834c 100644
> > --- a/drivers/usb/musb/musb_gadget.c
> > +++ b/drivers/usb/musb/musb_gadget.c
> > @@ -1794,6 +1794,7 @@ int musb_gadget_setup(struct musb *musb)
> >  
> >  	musb->is_active = 0;
> >  	musb_platform_try_idle(musb, 0);
> > +	musb_pullup(musb, 0);
> >  
> >  	status = usb_add_gadget_udc(musb->controller, &musb->g);
> >  	if (status)
> 
> Applied.

Sorry, I have dropped this patch from my tree. I realized the gadget
core already defines callbacks to control the pullup. I think the
proper fix should be calling usb_udc_vbus_handler() in musb gadget or
glue layers.

-Bin.