[PATCH 5/5] clk: ingenic/jz4725b: Fix "pll half" divider not read/written properly

[Paul Cercueil]

The code was setting the bit 21 of the CPCCR register to use a divider
of 2 for the "pll half" clock, and clearing the bit to use a divider
of 1.

This is the opposite of how this register field works: a cleared bit
means that the /2 divider is used, and a set bit means that the divider
is 1.

Restore the correct behaviour using the newly introduced .div_table
field.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 drivers/clk/ingenic/jz4725b-cgu.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index 31325dd40a0f..47287956824b 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -37,6 +37,10 @@ static const u8 jz4725b_cgu_cpccr_div_table[] = {
 	1, 2, 3, 4, 6, 8,
 };
 
+static const u8 jz4725b_cgu_pll_half_div_table[] = {
+	2, 1,
+};
+
 static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 
 	/* External clocks */
@@ -70,7 +74,10 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 	[JZ4725B_CLK_PLL_HALF] = {
 		"pll half", CGU_CLK_DIV,
 		.parents = { JZ4725B_CLK_PLL, -1, -1, -1 },
-		.div = { CGU_REG_CPCCR, 21, 1, 1, -1, -1, -1 },
+		.div = {
+			CGU_REG_CPCCR, 21, 1, 1, -1, -1, -1,
+			jz4725b_cgu_pll_half_div_table,
+		},
 	},
 
 	[JZ4725B_CLK_CCLK] = {
-- 
2.21.0.593.g511ec345e18