Re: [PATCH v3 03/10] drm: Add atomic variants for bridge enable/disable

[Daniel Vetter]

On Thu, May 02, 2019 at 03:49:45PM -0400, Sean Paul wrote:
> From: Sean Paul <seanpaul@xxxxxxxxxxxx>
> 
> This patch adds atomic variants for all of
> pre_enable/enable/disable/post_disable bridge functions. These will be
> called from the appropriate atomic helper functions. If the bridge
> driver doesn't implement the atomic version of the function, we will
> fall back to the vanilla implementation.
> 
> Note that some drivers call drm_bridge_disable directly, and these cases
> are not covered. It's up to the driver to decide whether to implement
> both atomic_disable and disable, or if it's not necessary.
> 
> Changes in v3:
> - Added to the patchset
> 
> Cc: Daniel Vetter <daniel@xxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/drm_atomic_helper.c |   8 +-
>  drivers/gpu/drm/drm_bridge.c        | 110 +++++++++++++++++++++++++++
>  include/drm/drm_bridge.h            | 114 ++++++++++++++++++++++++++++
>  3 files changed, 228 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 1f81ca8daad7..9d9e47276839 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -995,7 +995,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
>  		 * Each encoder has at most one connector (since we always steal
>  		 * it away), so we won't call disable hooks twice.
>  		 */
> -		drm_bridge_disable(encoder->bridge);
> +		drm_atomic_bridge_disable(encoder->bridge, old_state);
>  
>  		/* Right function depends upon target state. */
>  		if (funcs) {
> @@ -1009,7 +1009,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
>  				funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
>  		}
>  
> -		drm_bridge_post_disable(encoder->bridge);
> +		drm_atomic_bridge_post_disable(encoder->bridge, old_state);
>  	}
>  
>  	for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
> @@ -1308,7 +1308,7 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
>  		 * Each encoder has at most one connector (since we always steal
>  		 * it away), so we won't call enable hooks twice.
>  		 */
> -		drm_bridge_pre_enable(encoder->bridge);
> +		drm_atomic_bridge_pre_enable(encoder->bridge, old_state);
>  
>  		if (funcs) {
>  			if (funcs->atomic_enable)
> @@ -1319,7 +1319,7 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
>  				funcs->commit(encoder);
>  		}
>  
> -		drm_bridge_enable(encoder->bridge);
> +		drm_atomic_bridge_enable(encoder->bridge, old_state);
>  	}
>  
>  	drm_atomic_helper_commit_writebacks(dev, old_state);
> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> index 138b2711d389..accccb586adf 100644
> --- a/drivers/gpu/drm/drm_bridge.c
> +++ b/drivers/gpu/drm/drm_bridge.c
> @@ -352,6 +352,116 @@ void drm_bridge_enable(struct drm_bridge *bridge)
>  }
>  EXPORT_SYMBOL(drm_bridge_enable);
>  
> +/**
> + * drm_atomic_bridge_disable - disables all bridges in the encoder chain
> + * @bridge: bridge control structure
> + * @state: atomic state being committed
> + *
> + * Calls &drm_bridge_funcs.atomic_disable (falls back on
> + * &drm_bridge_funcs.disable) op for all the bridges in the encoder chain,
> + * starting from the last bridge to the first. These are called before calling
> + * the encoder's prepare op.

Since this is for atomic, where &drm_encoder_helper_funcs.atomic_disable
is the recommened one, would be good to change that. Plus use the
hyperlinked form. Same for all the below.


> + *
> + * Note: the bridge passed should be the one closest to the encoder
> + */
> +void drm_atomic_bridge_disable(struct drm_bridge *bridge,
> +			       struct drm_atomic_state *state)
> +{
> +	if (!bridge)
> +		return;
> +
> +	drm_atomic_bridge_disable(bridge->next, state);
> +
> +	if (bridge->funcs->atomic_disable)
> +		bridge->funcs->atomic_disable(bridge, state);
> +	else if (bridge->funcs->disable)
> +		bridge->funcs->disable(bridge);
> +}
> +EXPORT_SYMBOL(drm_atomic_bridge_disable);
> +
> +/**
> + * drm_atomic_bridge_post_disable - cleans up after disabling all bridges in the
> + *				    encoder chain
> + * @bridge: bridge control structure
> + * @state: atomic state being committed
> + *
> + * Calls &drm_bridge_funcs.atomic_post_disable (falls back on
> + * &drm_bridge_funcs.post_disable) op for all the bridges in the encoder chain,
> + * starting from the first bridge to the last. These are called after completing
> + * the encoder's prepare op.
> + *
> + * Note: the bridge passed should be the one closest to the encoder
> + */
> +void drm_atomic_bridge_post_disable(struct drm_bridge *bridge,
> +				    struct drm_atomic_state *state)
> +{
> +	if (!bridge)
> +		return;
> +
> +	if (bridge->funcs->atomic_post_disable)
> +		bridge->funcs->atomic_post_disable(bridge, state);
> +	else if (bridge->funcs->post_disable)
> +		bridge->funcs->post_disable(bridge);
> +
> +	drm_atomic_bridge_post_disable(bridge->next, state);
> +}
> +EXPORT_SYMBOL(drm_atomic_bridge_post_disable);
> +
> +/**
> + * drm_bridge_pre_enable - prepares for enabling all bridges in the encoder
> + *			   chain
> + * @bridge: bridge control structure
> + * @state: atomic state being committed
> + *
> + * Calls &drm_bridge_funcs.pre_enable (falls back on

atomic_pre_enable (I think all the others you've adjusted correctly).

> + * &drm_bridge_funcs.pre_enable) op for all the bridges in the encoder chain,
> + * starting from the last bridge to the first. These are called before calling
> + * the encoder's commit op.

&drm_encoder_helper_funcs.atomic_enable
> + *
> + * Note: the bridge passed should be the one closest to the encoder
> + */
> +void drm_atomic_bridge_pre_enable(struct drm_bridge *bridge,
> +				  struct drm_atomic_state *state)
> +{
> +	if (!bridge)
> +		return;
> +
> +	drm_atomic_bridge_pre_enable(bridge->next, state);
> +
> +	if (bridge->funcs->atomic_pre_enable)
> +		bridge->funcs->atomic_pre_enable(bridge, state);
> +	else if (bridge->funcs->pre_enable)
> +		bridge->funcs->pre_enable(bridge);
> +}
> +EXPORT_SYMBOL(drm_atomic_bridge_pre_enable);
> +
> +/**
> + * drm_atomic_bridge_enable - enables all bridges in the encoder chain
> + * @bridge: bridge control structure
> + * @state: atomic state being committed
> + *
> + * Calls &drm_bridge_funcs.atomic_enable (falls back on
> + * &drm_bridge_funcs.enable) op for all the bridges in the encoder chain,
> + * starting from the first bridge to the last. These are called after completing
> + * the encoder's commit op.
> + *
> + * Note: the bridge passed should be the one closest to the encoder
> + */
> +void drm_atomic_bridge_enable(struct drm_bridge *bridge,
> +			      struct drm_atomic_state *state)
> +{
> +	if (!bridge)
> +		return;
> +
> +	if (bridge->funcs->atomic_enable)
> +		bridge->funcs->atomic_enable(bridge, state);
> +	else if (bridge->funcs->enable)
> +		bridge->funcs->enable(bridge);
> +
> +	drm_atomic_bridge_enable(bridge->next, state);
> +}
> +EXPORT_SYMBOL(drm_atomic_bridge_enable);
> +
>  #ifdef CONFIG_OF
>  /**
>   * of_drm_find_bridge - find the bridge corresponding to the device node in
> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> index d4428913a4e1..86f436895c7b 100644
> --- a/include/drm/drm_bridge.h
> +++ b/include/drm/drm_bridge.h
> @@ -237,6 +237,111 @@ struct drm_bridge_funcs {
>  	 * The enable callback is optional.
>  	 */
>  	void (*enable)(struct drm_bridge *bridge);
> +
> +	/**
> +	 * @atomic_pre_enable:
> +	 *
> +	 * This callback should enable the bridge. It is called right before
> +	 * the preceding element in the display pipe is enabled. If the
> +	 * preceding element is a bridge this means it's called before that
> +	 * bridge's @atomic_pre_enable or @pre_enable function. If the preceding
> +	 * element is a &drm_encoder it's called right before the encoder's
> +	 * &drm_encoder_helper_funcs.atomic_enable,
> +	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
> +	 * &drm_encoder_helper_funcs.dpms hook.

I woulnd't mention the depracated (for atomic drivers) hooks anymore, i.e.
drop commit, dpms, prepare in all these texts. Also makes it more
readable.

> +	 *
> +	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
> +	 * will not yet be running when this callback is called. The bridge must
> +	 * not enable the display link feeding the next bridge in the chain (if
> +	 * there is one) when this callback is called.
> +	 *
> +	 * Note that this function will only be invoked in the context of an
> +	 * atomic commit. It will not be invoked from &drm_bridge_pre_enable. It
> +	 * would be prudent to also provide an implementation of @pre_enable if
> +	 * you are expecting driver calls into &drm_bridge_pre_enable.
> +	 *
> +	 * The @atomic_pre_enable callback is optional.
> +	 */
> +	void (*atomic_pre_enable)(struct drm_bridge *bridge,
> +				  struct drm_atomic_state *state);
> +
> +	/**
> +	 * @atomic_enable:
> +	 *
> +	 * This callback should enable the bridge. It is called right after
> +	 * the preceding element in the display pipe is enabled. If the
> +	 * preceding element is a bridge this means it's called after that
> +	 * bridge's @atomic_enable or @enable function. If the preceding element
> +	 * is a &drm_encoder it's called right after the encoder's
> +	 * &drm_encoder_helper_funcs.atomic_enable,
> +	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
> +	 * &drm_encoder_helper_funcs.dpms hook.
> +	 *
> +	 * The bridge can assume that the display pipe (i.e. clocks and timing
> +	 * signals) feeding it is running when this callback is called. This
> +	 * callback must enable the display link feeding the next bridge in the
> +	 * chain if there is one.
> +	 *
> +	 * Note that this function will only be invoked in the context of an
> +	 * atomic commit. It will not be invoked from &drm_bridge_enable. It
> +	 * would be prudent to also provide an implementation of @enable if
> +	 * you are expecting driver calls into &drm_bridge_enable.
> +	 *
> +	 * The enable callback is optional.
> +	 */
> +	void (*atomic_enable)(struct drm_bridge *bridge,
> +			      struct drm_atomic_state *state);
> +	/**
> +	 * @atomic_disable:
> +	 *
> +	 * This callback should disable the bridge. It is called right before
> +	 * the preceding element in the display pipe is disabled. If the
> +	 * preceding element is a bridge this means it's called before that
> +	 * bridge's @atomic_disable or @disable vfunc. If the preceding element
> +	 * is a &drm_encoder it's called right before the
> +	 * &drm_encoder_helper_funcs.atomic_disable,
> +	 * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare
> +	 * or &drm_encoder_helper_funcs.dpms hook.
> +	 *
> +	 * The bridge can assume that the display pipe (i.e. clocks and timing
> +	 * signals) feeding it is still running when this callback is called.
> +	 *
> +	 * Note that this function will only be invoked in the context of an
> +	 * atomic commit. It will not be invoked from &drm_bridge_disable. It
> +	 * would be prudent to also provide an implementation of @disable if
> +	 * you are expecting driver calls into &drm_bridge_disable.
> +	 *
> +	 * The disable callback is optional.
> +	 */
> +	void (*atomic_disable)(struct drm_bridge *bridge,
> +			       struct drm_atomic_state *state);
> +
> +	/**
> +	 * @atomic_post_disable:
> +	 *
> +	 * This callback should disable the bridge. It is called right after the
> +	 * preceding element in the display pipe is disabled. If the preceding
> +	 * element is a bridge this means it's called after that bridge's
> +	 * @atomic_post_disable or @post_disable function. If the preceding
> +	 * element is a &drm_encoder it's called right after the encoder's
> +	 * &drm_encoder_helper_funcs.atomic_disable,
> +	 * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare
> +	 * or &drm_encoder_helper_funcs.dpms hook.
> +	 *
> +	 * The bridge must assume that the display pipe (i.e. clocks and timing
> +	 * singals) feeding it is no longer running when this callback is
> +	 * called.
> +	 *
> +	 * Note that this function will only be invoked in the context of an
> +	 * atomic commit. It will not be invoked from &drm_bridge_post_disable.
> +	 * It would be prudent to also provide an implementation of
> +	 * @post_disable if you are expecting driver calls into
> +	 * &drm_bridge_post_disable.
> +	 *
> +	 * The post_disable callback is optional.
> +	 */
> +	void (*atomic_post_disable)(struct drm_bridge *bridge,
> +				    struct drm_atomic_state *state);
>  };
>  
>  /**
> @@ -314,6 +419,15 @@ void drm_bridge_mode_set(struct drm_bridge *bridge,
>  void drm_bridge_pre_enable(struct drm_bridge *bridge);
>  void drm_bridge_enable(struct drm_bridge *bridge);
>  
> +void drm_atomic_bridge_disable(struct drm_bridge *bridge,
> +			       struct drm_atomic_state *state);
> +void drm_atomic_bridge_post_disable(struct drm_bridge *bridge,
> +				    struct drm_atomic_state *state);
> +void drm_atomic_bridge_pre_enable(struct drm_bridge *bridge,
> +				  struct drm_atomic_state *state);
> +void drm_atomic_bridge_enable(struct drm_bridge *bridge,
> +			      struct drm_atomic_state *state);
> +
>  #ifdef CONFIG_DRM_PANEL_BRIDGE
>  struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel,
>  					u32 connector_type);
> -- 
> Sean Paul, Software Engineer, Google / Chromium OS

With the doc nits:

Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>

> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch