Re: [PATCH v3 02/10] drm: Add drm_atomic_crtc_state_for_encoder helper

From: Daniel Vetter
Date: Fri May 03 2019 - 10:07:10 EST

Next message: Ross Zwisler: "Re: [PATCH] MAINTAINERS: update git tree for sound entries"
Previous message: Srinath Mannam: "[PATCH v6 3/3] PCI: iproc: Add sorted dma ranges resource entries to host bridge"
In reply to: Sean Paul: "Re: [PATCH v3 02/10] drm: Add drm_atomic_crtc_state_for_encoder helper"
Next in thread: Daniel Vetter: "Re: [PATCH v3 02/10] drm: Add drm_atomic_crtc_state_for_encoder helper"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, May 3, 2019 at 2:47 PM Sean Paul <sean@xxxxxxxxxx> wrote:
> On Fri, May 03, 2019 at 10:18:51AM +0200, Daniel Vetter wrote:
> > On Thu, May 02, 2019 at 03:49:44PM -0400, Sean Paul wrote:
> > > From: Sean Paul <seanpaul@xxxxxxxxxxxx>
> > >
> > > This patch adds a helper to tease out the currently connected crtc for
> > > an encoder, along with its state. This follows the same pattern as the
> > > drm_atomic_crtc_*_for_* macros in the atomic helpers. Since the
> > > relationship of crtc:encoder is 1:n, we don't need a loop since there is
> > > only one crtc per encoder.
> >
> > No idea which macros you mean, couldn't find them.
>
> No longer relevant with the changes below, but for completeness, I was trying to
> refer to drm_atomic_crtc_state_for_each_plane and friends. I see now that I
> wasn't terribly clear :)
>
>
> > >
> > > Instead of splitting this into 3 functions which all do the same thing,
> > > this is presented as one function. Perhaps that's too ugly and it should
> > > be split to:
> > > struct drm_crtc *drm_atomic_crtc_for_encoder(state, encoder);
> > > struct drm_crtc_state *drm_atomic_new_crtc_state_for_encoder(state, encoder);
> > > struct drm_crtc_state *drm_atomic_old_crtc_state_for_encoder(state, encoder);
> > >
> > > Suggestions welcome.
> > >
> > > Changes in v3:
> > > - Added to the set
> > >
> > > Cc: Daniel Vetter <daniel@xxxxxxxx>
> > > Cc: Ville SyrjÃlÃ <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/drm_atomic_helper.c | 48 +++++++++++++++++++++++++++++
> > > include/drm/drm_atomic_helper.h | 6 ++++
> > > 2 files changed, 54 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> > > index 71cc7d6b0644..1f81ca8daad7 100644
> > > --- a/drivers/gpu/drm/drm_atomic_helper.c
> > > +++ b/drivers/gpu/drm/drm_atomic_helper.c
> > > @@ -3591,3 +3591,51 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
> > > return ret;
> > > }
> > > EXPORT_SYMBOL(drm_atomic_helper_legacy_gamma_set);
> > > +
> > > +/**
> > > + * drm_atomic_crtc_state_for_encoder - Get crtc and new/old state for an encoder
> > > + * @state: Atomic state
> > > + * @encoder: The encoder to fetch the crtc information for
> > > + * @crtc: If not NULL, receives the currently connected crtc
> > > + * @old_crtc_state: If not NULL, receives the crtc's old state
> > > + * @new_crtc_state: If not NULL, receives the crtc's new state
> > > + *
> > > + * This function finds the crtc which is currently connected to @encoder and
> > > + * returns it as well as its old and new state. If there is no crtc currently
> > > + * connected, the function will clear @crtc, @old_crtc_state, @new_crtc_state.
> > > + *
> > > + * All of @crtc, @old_crtc_state, and @new_crtc_state are optional.
> > > + */
> > > +void drm_atomic_crtc_state_for_encoder(struct drm_atomic_state *state,
> > > + struct drm_encoder *encoder,
> > > + struct drm_crtc **crtc,
> > > + struct drm_crtc_state **old_crtc_state,
> > > + struct drm_crtc_state **new_crtc_state)
> > > +{
> > > + struct drm_crtc *tmp_crtc;
> > > + struct drm_crtc_state *tmp_new_crtc_state, *tmp_old_crtc_state;
> > > + u32 enc_mask = drm_encoder_mask(encoder);
> > > + int i;
> > > +
> > > + for_each_oldnew_crtc_in_state(state, tmp_crtc, tmp_old_crtc_state,
> > > + tmp_new_crtc_state, i) {
> >
> > So there's two ways to do this:
> >
> > - Using encoder_mask, which is a helper thing. In that case I'd rename
> > this to drm_atomic_helper_crtc_for_encoder.
> >
> > - By looping over the connectors, and looking at ->best_encoder and
> > ->crtc, see drm_encoder_get_crtc in drm_encoder.c. That's the core way
> > of doing things. In that case call it drm_atomic_crtc_for_encoder, and
> > put it into drm_atomic.c.
> >
> > There's two ways of doing the 2nd one: looping over connectors in a
> > drm_atomic_state, or the connector list overall. First requires that the
> > encoder is already in drm_atomic_state (which I think makes sense).
>
> Yeah, I wasn't particularly interested in encoders not in state. I had
> considered going the connector route, but since you can have multiple connectors
> per encoder, going through crtc seemed a bit more direct.

You can have multiple possible connectors for a given encoder, and
multiple possible encoders for a given connector. In both cases the
driver picks for you. But for active encoders and connectors the
relationship is 1:1. That's what the helpers exploit by looping over
connectors to get at encoders.

> > Even more complications on old/new_crtc_state: Is that the old state for
> > the old crtc, or the old state for the new crtc (that can switch too).
> > Same for the new crtc state ...
> >
> > tldr; I'd create 2 functions:
> >
> > drm_crtc *drm_atomic_encoder_get_new_crtc(drm_atomic_state *state, encoder)
> > drm_crtc *drm_atomic_encoder_get_old_crtc(drm_atomic_state *state, encoder)
> >
> > With the requirement that they'll return NULL if the encder isn't in in
> > @state, and implemented using looping over connectors in @state.
>
> It seems like we could just tweak this function a bit to get the new or old crtc
> for an encoder. Any particular reason for going through connector instead? Is it
> to avoid the encoder_mask which is a helper thing? In that case, perhaps this
> should use connector links and live in drm_atomic.c?

Well as explained, there's 3 ways you can achieve the same really. I
do think the "loop over connectors in drm_atomic_state, WARN() if we
haven't found the encoder you want the crtc for" is probably the most
solid aproach since it picks up a core atomic concept. But the others
(looping the connector list, or looping encoder_mask) all work too.

Aside: plane/encoder_mask was added to go from crtc to
planes/encoders, not really to go the other way round.

Another solution would be to pass the connector_state to all atomic
encoder hooks, then you could just look at connector_state->crtc. Plus
you can get at all the other interesting bits and pieces of
information. In a way this is fallout from us keeping encoders as a
meaningful concept for easier transition of legacy drivers, while
still keeping them entirely irrelevant for the actual userspace api
semantics.

So maybe we want drm_atomic_encoder_get_old/new_connector here. Or
maybe we even want the full set of functions, i.e.
drm_atomic_encoder_get_old/new_connector/crtc.

In all cases I think only returning the object, not it's state is
simplest, since then you avoid the confusion of old/new state for
old/new obj.
-Daniel

> Thanks for the review!
>
> Sean
>
> >
> > tldr; this is a lot more tricky than it looks like ...
> > -Daniel
> >
> >
> > > + if (!(tmp_new_crtc_state->encoder_mask & enc_mask))
> > > + continue;
> > > +
> > > + if (new_crtc_state)
> > > + *new_crtc_state = tmp_new_crtc_state;
> > > + if (old_crtc_state)
> > > + *old_crtc_state = tmp_old_crtc_state;
> > > + if (crtc)
> > > + *crtc = tmp_crtc;
> > > + return;
> > > + }
> > > +
> > > + if (new_crtc_state)
> > > + *new_crtc_state = NULL;
> > > + if (old_crtc_state)
> > > + *old_crtc_state = NULL;
> > > + if (crtc)
> > > + *crtc = NULL;
> > > +}
> > > +EXPORT_SYMBOL(drm_atomic_crtc_state_for_encoder);
> > > diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
> > > index 58214be3bf3d..2383550a0cc8 100644
> > > --- a/include/drm/drm_atomic_helper.h
> > > +++ b/include/drm/drm_atomic_helper.h
> > > @@ -153,6 +153,12 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
> > > uint32_t size,
> > > struct drm_modeset_acquire_ctx *ctx);
> > >
> > > +void drm_atomic_crtc_state_for_encoder(struct drm_atomic_state *state,
> > > + struct drm_encoder *encoder,
> > > + struct drm_crtc **crtc,
> > > + struct drm_crtc_state **old_crtc_state,
> > > + struct drm_crtc_state **new_crtc_state);
> > > +
> > > /**
> > > * drm_atomic_crtc_for_each_plane - iterate over planes currently attached to CRTC
> > > * @plane: the loop cursor
> > > --
> > > Sean Paul, Software Engineer, Google / Chromium OS
> > >
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

Next message: Ross Zwisler: "Re: [PATCH] MAINTAINERS: update git tree for sound entries"
Previous message: Srinath Mannam: "[PATCH v6 3/3] PCI: iproc: Add sorted dma ranges resource entries to host bridge"
In reply to: Sean Paul: "Re: [PATCH v3 02/10] drm: Add drm_atomic_crtc_state_for_encoder helper"
Next in thread: Daniel Vetter: "Re: [PATCH v3 02/10] drm: Add drm_atomic_crtc_state_for_encoder helper"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]