RE: [PATCH 2/4] nvmem: imx: add i.MX8 nvmem driver

[Aisheng Dong]

> From: Peng Fan
> Sent: Sunday, May 5, 2019 9:28 PM
> Subject: [PATCH 2/4] nvmem: imx: add i.MX8 nvmem driver
> 
> This patch adds i.MX8 nvmem ocotp driver to access fuse via RPC to i.MX8
> system controller.
> 
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>

Only a few minor comments.
Otherwise, this patch looks good to me.

First, the patch title probably better to be:
nvmem: imx: add i.MX8 SCU based ocotp driver support

> Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
> Cc: Fabio Estevam <festevam@xxxxxxxxx>
> Cc: NXP Linux Team <linux-imx@xxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> ---
>  drivers/nvmem/Kconfig         |   7 +++
>  drivers/nvmem/Makefile        |   2 +
>  drivers/nvmem/imx-ocotp-scu.c | 135
> ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 144 insertions(+)
>  create mode 100644 drivers/nvmem/imx-ocotp-scu.c
> 
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index
> 530d570724c9..0e705c04bd8c 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -36,6 +36,13 @@ config NVMEM_IMX_OCOTP
>  	  This driver can also be built as a module. If so, the module
>  	  will be called nvmem-imx-ocotp.
> 
> +config NVMEM_IMX_OCOTP_SCU
> +	tristate "i.MX8 On-Chip OTP Controller support"

i.MX8 SCU On-Chip OTP Controller support

> +	depends on IMX_SCU
> +	help
> +	  This is a driver for the On-Chip OTP Controller (OCOTP)

SCU On-Chip OTP

> +	  available on i.MX8 SoCs.
> +
>  config NVMEM_LPC18XX_EEPROM
>  	tristate "NXP LPC18XX EEPROM Memory Support"
>  	depends on ARCH_LPC18XX || COMPILE_TEST diff --git
> a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index
> 2ece8ffffdda..30d653d34e57 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -13,6 +13,8 @@ obj-$(CONFIG_NVMEM_IMX_IIM)	+=
> nvmem-imx-iim.o
>  nvmem-imx-iim-y			:= imx-iim.o
>  obj-$(CONFIG_NVMEM_IMX_OCOTP)	+= nvmem-imx-ocotp.o
>  nvmem-imx-ocotp-y		:= imx-ocotp.o
> +obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
> +nvmem-imx-ocotp-scu-y		:= imx-ocotp-scu.o
>  obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+=
> nvmem_lpc18xx_eeprom.o
>  nvmem_lpc18xx_eeprom-y	:= lpc18xx_eeprom.o
>  obj-$(CONFIG_NVMEM_LPC18XX_OTP)	+= nvmem_lpc18xx_otp.o
> diff --git a/drivers/nvmem/imx-ocotp-scu.c b/drivers/nvmem/imx-ocotp-scu.c
> new file mode 100644 index 000000000000..07e1eba385ac
> --- /dev/null
> +++ b/drivers/nvmem/imx-ocotp-scu.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * i.MX8 OCOTP fusebox driver
> + *
> + * Copyright 2019 NXP
> + *
> + * Peng Fan <peng.fan@xxxxxxx>
> + */
> +
> +#include <linux/firmware/imx/sci.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-provider.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +enum ocotp_devtype {
> +	IMX8QXP,
> +};
> +
> +struct ocotp_devtype_data {
> +	int devtype;
> +	int nregs;
> +};
> +
> +struct ocotp_priv {
> +	struct device *dev;
> +	const struct ocotp_devtype_data *data;
> +	struct imx_sc_ipc *nvmem_ipc;
> +};
> +
> +static struct ocotp_devtype_data imx8qxp_data = {
> +	.devtype = IMX8QXP,
> +	.nregs = 800,
> +};
> +
> +static int imx_scu_ocotp_read(void *context, unsigned int offset,
> +			      void *val, size_t bytes)
> +{
> +	struct ocotp_priv *priv = context;
> +	u32 count, index, num_bytes;
> +	u8 *buf, *p;

It seems buf has never been used as u8.
So probably a better way is:
U32 *buf;
Void *p.
Then we can save all the explicit conversion of u32.

> +	int i, ret;
> +
> +	index = offset >> 2;
> +	num_bytes = round_up((offset % 4) + bytes, 4);
> +	count = num_bytes >> 2;
> +
> +	if (count > (priv->data->nregs - index))
> +		count = priv->data->nregs - index;
> +
> +	p = kzalloc(num_bytes, GFP_KERNEL);
> +	if (!p)
> +		return -ENOMEM;
> +
> +	buf = p;
> +
> +	for (i = index; i < (index + count); i++) {
> +		if (priv->data->devtype == IMX8QXP) {
> +			if ((i > 271) && (i < 544)) {
> +				*(u32 *)buf = 0;
> +				buf += 4;
> +				continue;
> +			}
> +		}
> +
> +		ret = imx_sc_misc_otp_fuse_read(priv->nvmem_ipc, i,
> +						(u32 *)buf);

Is this API already in kernel?

> +		if (ret) {
> +			kfree(p);
> +			return ret;
> +		}
> +		buf += 4;
> +	}
> +
> +	index = offset % 4;
> +	memcpy(val, &p[index], bytes);
> +
> +	kfree(p);
> +
> +	return 0;
> +}
> +
> +static struct nvmem_config imx_scu_ocotp_nvmem_config = {
> +	.name = "imx-ocotp",

imx-scu-octop

> +	.read_only = true,
> +	.word_size = 4,
> +	.stride = 1,
> +	.owner = THIS_MODULE,
> +	.reg_read = imx_scu_ocotp_read,
> +};
> +
> +static const struct of_device_id imx_scu_ocotp_dt_ids[] = {
> +	{ .compatible = "fsl,imx8qxp-ocotp", (void *)&imx8qxp_data },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, imx_scu_ocotp_dt_ids);
> +
> +static int imx_scu_ocotp_probe(struct platform_device *pdev) {
> +	struct device *dev = &pdev->dev;
> +	struct ocotp_priv *priv;
> +	struct nvmem_device *nvmem;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	ret = imx_scu_get_handle(&priv->nvmem_ipc);
> +	if (ret)
> +		return ret;
> +
> +	priv->data = of_device_get_match_data(dev);
> +	priv->dev = dev;
> +	imx_scu_ocotp_nvmem_config.size = 4 * priv->data->nregs;
> +	imx_scu_ocotp_nvmem_config.dev = dev;
> +	imx_scu_ocotp_nvmem_config.priv = priv;
> +	nvmem = devm_nvmem_register(dev, &imx_scu_ocotp_nvmem_config);
> +
> +	return PTR_ERR_OR_ZERO(nvmem);
> +}
> +
> +static struct platform_driver imx_scu_ocotp_driver = {
> +	.probe	= imx_scu_ocotp_probe,
> +	.driver = {
> +		.name	= "imx_scu_ocotp",
> +		.of_match_table = imx_scu_ocotp_dt_ids,
> +	},
> +};
> +module_platform_driver(imx_scu_ocotp_driver);
> +
> +MODULE_AUTHOR("Peng Fan <peng.fan@xxxxxxx>");
> +MODULE_DESCRIPTION("i.MX8QM OCOTP fuse box driver");

i.MX8 SCU OCOTP fuse box driver

Regards
Dong Aisheng

> +MODULE_LICENSE("GPL v2");
> --
> 2.16.4