Re: [PATCH v2 15/18] fpga: dfl: fme: add thermal management support

From: Alan Tull
Date: Tue May 07 2019 - 14:22:26 EST

Next message: Gustavo A. R. Silva: "[PATCH] Input: libps2 - mark expected switch fall-through"
Previous message: Martin Blumenstingl: "Re: [PATCH v3 5/6] pinctrl: meson: add support of drive-strength-microamp"
Next in thread: Guenter Roeck: "Re: [PATCH v2 15/18] fpga: dfl: fme: add thermal management support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Apr 29, 2019 at 4:13 AM Wu Hao <hao.wu@xxxxxxxxx> wrote:

+ The hwmon people

>
> This patch adds support to thermal management private feature for DFL
> FPGA Management Engine (FME). This private feature driver registers
> a hwmon for thermal/temperature monitoring (hwmon temp1_input).
> If hardware automatic throttling is supported by this hardware, then
> driver also exposes sysfs interfaces under hwmon for thresholds
> (temp1_alarm/ crit/ emergency), threshold status (temp1_alarm_status/
> temp1_crit_status) and throttling policy (temp1_alarm_policy).
>
> Signed-off-by: Luwei Kang <luwei.kang@xxxxxxxxx>
> Signed-off-by: Russ Weight <russell.h.weight@xxxxxxxxx>
> Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
> Signed-off-by: Wu Hao <hao.wu@xxxxxxxxx>
> ---
> v2: create a dfl_fme_thermal hwmon to expose thermal information.
> move all sysfs interfaces under hwmon
> tempareture --> hwmon temp1_input
> threshold1 --> hwmon temp1_alarm
> threshold2 --> hwmon temp1_crit
> trip_threshold --> hwmon temp1_emergency
> threshold1_status --> hwmon temp1_alarm_status
> threshold2_status --> hwmon temp1_crit_status
> threshold1_policy --> hwmon temp1_alarm_policy
> ---
> Documentation/ABI/testing/sysfs-platform-dfl-fme | 64 +++++++
> drivers/fpga/Kconfig | 2 +-
> drivers/fpga/dfl-fme-main.c | 212 +++++++++++++++++++++++
> 3 files changed, 277 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> index d1aa375..dfbd315 100644
> --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
> +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> @@ -44,3 +44,67 @@ Description: Read-only. It returns socket_id to indicate which socket
> this FPGA belongs to, only valid for integrated solution.
> User only needs this information, in case standard numa node
> can't provide correct information.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/name
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <hao.wu@xxxxxxxxx>
> +Description: Read-Only. Read this file to get the name of hwmon device, it
> + supports values:
> + 'dfl_fme_thermal' - thermal hwmon device name
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <hao.wu@xxxxxxxxx>
> +Description: Read-Only. It returns FPGA device temperature in millidegrees
> + Celsius.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_alarm
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <hao.wu@xxxxxxxxx>
> +Description: Read-Only. It returns hardware threshold1 temperature in
> + millidegrees Celsius. If temperature rises at or above this
> + threshold, hardware starts 50% or 90% throttling (see
> + 'temp1_alarm_policy').
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_crit
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <hao.wu@xxxxxxxxx>
> +Description: Read-Only. It returns hardware threshold2 temperature in
> + millidegrees Celsius. If temperature rises at or above this
> + threshold, hardware starts 100% throttling.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_emergency
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <hao.wu@xxxxxxxxx>
> +Description: Read-Only. It returns hardware trip threshold temperature in
> + millidegrees Celsius. If temperature rises at or above this
> + threshold, a fatal event will be triggered to board management
> + controller (BMC) to shutdown FPGA.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_alarm_status
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <hao.wu@xxxxxxxxx>
> +Description: Read-only. It returns 1 if temperature is currently at or above
> + hardware threshold1 (see 'temp1_alarm'), otherwise 0.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_crit_status
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <hao.wu@xxxxxxxxx>
> +Description: Read-only. It returns 1 if temperature is currently at or above
> + hardware threshold2 (see 'temp1_crit'), otherwise 0.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_alarm_policy
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <hao.wu@xxxxxxxxx>
> +Description: Read-Only. Read this file to get the policy of hardware threshold1
> + (see 'temp1_alarm'). It only supports two values (policies):
> + 0 - AP2 state (90% throttling)
> + 1 - AP1 state (50% throttling)
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index c20445b..a6d7588 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -154,7 +154,7 @@ config FPGA_DFL
>
> config FPGA_DFL_FME
> tristate "FPGA DFL FME Driver"
> - depends on FPGA_DFL
> + depends on FPGA_DFL && HWMON
> help
> The FPGA Management Engine (FME) is a feature device implemented
> under Device Feature List (DFL) framework. Select this option to
> diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> index 8339ee8..b9a68b8 100644
> --- a/drivers/fpga/dfl-fme-main.c
> +++ b/drivers/fpga/dfl-fme-main.c
> @@ -14,6 +14,8 @@
> * Henry Mitchel <henry.mitchel@xxxxxxxxx>
> */
>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/uaccess.h>
> @@ -217,6 +219,212 @@ static long fme_hdr_ioctl(struct platform_device *pdev,
> .ioctl = fme_hdr_ioctl,
> };
>
> +#define FME_THERM_THRESHOLD 0x8
> +#define TEMP_THRESHOLD1 GENMASK_ULL(6, 0)
> +#define TEMP_THRESHOLD1_EN BIT_ULL(7)
> +#define TEMP_THRESHOLD2 GENMASK_ULL(14, 8)
> +#define TEMP_THRESHOLD2_EN BIT_ULL(15)
> +#define TRIP_THRESHOLD GENMASK_ULL(30, 24)
> +#define TEMP_THRESHOLD1_STATUS BIT_ULL(32) /* threshold1 reached */
> +#define TEMP_THRESHOLD2_STATUS BIT_ULL(33) /* threshold2 reached */
> +/* threshold1 policy: 0 - AP2 (90% throttle) / 1 - AP1 (50% throttle) */
> +#define TEMP_THRESHOLD1_POLICY BIT_ULL(44)
> +
> +#define FME_THERM_RDSENSOR_FMT1 0x10
> +#define FPGA_TEMPERATURE GENMASK_ULL(6, 0)
> +
> +#define FME_THERM_CAP 0x20
> +#define THERM_NO_THROTTLE BIT_ULL(0)
> +
> +#define MD_PRE_DEG
> +
> +static bool fme_thermal_throttle_support(void __iomem *base)
> +{
> + u64 v = readq(base + FME_THERM_CAP);
> +
> + return FIELD_GET(THERM_NO_THROTTLE, v) ? false : true;
> +}
> +
> +static umode_t thermal_hwmon_attrs_visible(const void *drvdata,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + const struct dfl_feature *feature = drvdata;
> +
> + /* temperature is always supported, and check hardware cap for others */
> + if (attr == hwmon_temp_input)
> + return 0444;
> +
> + return fme_thermal_throttle_support(feature->ioaddr) ? 0444 : 0;
> +}
> +
> +static int thermal_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u64 v;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + v = readq(feature->ioaddr + FME_THERM_RDSENSOR_FMT1);
> + *val = (long)(FIELD_GET(FPGA_TEMPERATURE, v) * 1000);
> + break;
> + case hwmon_temp_alarm:
> + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> + *val = (long)(FIELD_GET(TEMP_THRESHOLD1, v) * 1000);
> + break;
> + case hwmon_temp_crit:
> + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> + *val = (long)(FIELD_GET(TEMP_THRESHOLD2, v) * 1000);
> + break;
> + case hwmon_temp_emergency:
> + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> + *val = (long)(FIELD_GET(TRIP_THRESHOLD, v) * 1000);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static const struct hwmon_ops thermal_hwmon_ops = {
> + .is_visible = thermal_hwmon_attrs_visible,
> + .read = thermal_hwmon_read,
> +};
> +
> +static const u32 thermal_hwmon_temp_config[] = {
> + HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_CRIT | HWMON_T_EMERGENCY,
> + 0
> +};
> +
> +static const struct hwmon_channel_info hwmon_temp_info = {
> + .type = hwmon_temp,
> + .config = thermal_hwmon_temp_config,
> +};
> +
> +static const struct hwmon_channel_info *thermal_hwmon_info[] = {
> + &hwmon_temp_info,
> + NULL
> +};
> +
> +static const struct hwmon_chip_info thermal_hwmon_chip_info = {
> + .ops = &thermal_hwmon_ops,
> + .info = thermal_hwmon_info,
> +};
> +
> +static ssize_t temp1_alarm_status_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u64 v;
> +
> + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n",
> + (unsigned int)FIELD_GET(TEMP_THRESHOLD1_STATUS, v));
> +}
> +
> +static ssize_t temp1_crit_status_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u64 v;
> +
> + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n",
> + (unsigned int)FIELD_GET(TEMP_THRESHOLD2_STATUS, v));
> +}
> +
> +static ssize_t temp1_alarm_policy_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u64 v;
> +
> + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n",
> + (unsigned int)FIELD_GET(TEMP_THRESHOLD1_POLICY, v));
> +}
> +
> +static DEVICE_ATTR_RO(temp1_alarm_status);
> +static DEVICE_ATTR_RO(temp1_crit_status);
> +static DEVICE_ATTR_RO(temp1_alarm_policy);
> +
> +static struct attribute *thermal_extra_attrs[] = {
> + &dev_attr_temp1_alarm_status.attr,
> + &dev_attr_temp1_crit_status.attr,
> + &dev_attr_temp1_alarm_policy.attr,
> + NULL,
> +};
> +
> +static umode_t thermal_extra_attrs_visible(struct kobject *kobj,
> + struct attribute *attr, int index)
> +{
> + struct device *dev = kobj_to_dev(kobj);
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> +
> + return fme_thermal_throttle_support(feature->ioaddr) ? attr->mode : 0;
> +}
> +
> +static const struct attribute_group thermal_extra_group = {
> + .attrs = thermal_extra_attrs,
> + .is_visible = thermal_extra_attrs_visible,
> +};
> +__ATTRIBUTE_GROUPS(thermal_extra);
> +
> +static int fme_thermal_mgmt_init(struct platform_device *pdev,
> + struct dfl_feature *feature)
> +{
> + struct device *hwmon;
> +
> + dev_dbg(&pdev->dev, "FME Thermal Management Init.\n");
> +
> + /*
> + * create hwmon to allow userspace monitoring temperature and other
> + * threshold information.
> + *
> + * temp1_alarm -> hardware threshold 1 -> 50% or 90% throttling
> + * temp1_crit -> hardware threshold 2 -> 100% throttling
> + * temp1_emergency -> hardware trip_threshold to shutdown FPGA
> + *
> + * create device specific sysfs interfaces, e.g. read temp1_alarm_policy
> + * to understand the actual hardware throttling action (50% vs 90%).
> + *
> + * If hardware doesn't support automatic throttling per thresholds,
> + * then all above sysfs interfaces are not visible except temp1_input
> + * for temperature.
> + */
> + hwmon = devm_hwmon_device_register_with_info(&pdev->dev,
> + "dfl_fme_thermal", feature,
> + &thermal_hwmon_chip_info,
> + thermal_extra_groups);
> + if (IS_ERR(hwmon)) {
> + dev_err(&pdev->dev, "Fail to register thermal hwmon\n");
> + return PTR_ERR(hwmon);
> + }
> +
> + return 0;
> +}
> +
> +static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
> + struct dfl_feature *feature)
> +{
> + dev_dbg(&pdev->dev, "FME Thermal Management UInit.\n");
> +}
> +
> +static const struct dfl_feature_id fme_thermal_mgmt_id_table[] = {
> + {.id = FME_FEATURE_ID_THERMAL_MGMT,},
> + {0,}
> +};
> +
> +static const struct dfl_feature_ops fme_thermal_mgmt_ops = {
> + .init = fme_thermal_mgmt_init,
> + .uinit = fme_thermal_mgmt_uinit,
> +};
> +
> static struct dfl_feature_driver fme_feature_drvs[] = {
> {
> .id_table = fme_hdr_id_table,
> @@ -227,6 +435,10 @@ static long fme_hdr_ioctl(struct platform_device *pdev,
> .ops = &fme_pr_mgmt_ops,
> },
> {
> + .id_table = fme_thermal_mgmt_id_table,
> + .ops = &fme_thermal_mgmt_ops,
> + },
> + {
> .ops = NULL,
> },
> };
> --
> 1.8.3.1
>

Next message: Gustavo A. R. Silva: "[PATCH] Input: libps2 - mark expected switch fall-through"
Previous message: Martin Blumenstingl: "Re: [PATCH v3 5/6] pinctrl: meson: add support of drive-strength-microamp"
Next in thread: Guenter Roeck: "Re: [PATCH v2 15/18] fpga: dfl: fme: add thermal management support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]