Re: [PATCH v2 16/18] fpga: dfl: fme: add power management support

[Alan Tull]

On Mon, Apr 29, 2019 at 4:13 AM Wu Hao <hao.wu@xxxxxxxxx> wrote:

+ hwmon folks

>
> This patch adds support for power management private feature under
> FPGA Management Engine (FME). This private feature driver registers
> a hwmon for power (power1_input), thresholds information, e.g.
> (power1_cap / crit) and also read-only sysfs interfaces for other
> power management information. For configuration, user could write
> threshold values via above power1_cap / crit sysfs interface
> under hwmon too.
>
> Signed-off-by: Luwei Kang <luwei.kang@xxxxxxxxx>
> Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
> Signed-off-by: Wu Hao <hao.wu@xxxxxxxxx>
> ---
> v2: create a dfl_fme_power hwmon to expose power sysfs interfaces.
>     move all sysfs interfaces under hwmon
>         consumed          --> hwmon power1_input
>         threshold1        --> hwmon power1_cap
>         threshold2        --> hwmon power1_crit
>         threshold1_status --> hwmon power1_cap_status
>         threshold2_status --> hwmon power1_crit_status
>         xeon_limit        --> hwmon power1_xeon_limit
>         fpga_limit        --> hwmon power1_fpga_limit
>         ltr               --> hwmon power1_ltr
> ---
>  Documentation/ABI/testing/sysfs-platform-dfl-fme |  67 ++++++
>  drivers/fpga/dfl-fme-main.c                      | 247 +++++++++++++++++++++++
>  2 files changed, 314 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> index dfbd315..e2ba92d 100644
> --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
> +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> @@ -52,6 +52,7 @@ Contact:      Wu Hao <hao.wu@xxxxxxxxx>
>  Description:   Read-Only. Read this file to get the name of hwmon device, it
>                 supports values:
>                     'dfl_fme_thermal' - thermal hwmon device name
> +                   'dfl_fme_power'   - power hwmon device name
>
>  What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
>  Date:          April 2019
> @@ -108,3 +109,69 @@ Description:       Read-Only. Read this file to get the policy of hardware threshold1
>                 (see 'temp1_alarm'). It only supports two values (policies):
>                     0 - AP2 state (90% throttling)
>                     1 - AP1 state (50% throttling)
> +
> +What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
> +Date:          April 2019
> +KernelVersion: 5.2
> +Contact:       Wu Hao <hao.wu@xxxxxxxxx>
> +Description:   Read-Only. It returns current FPGA power consumption in uW.
> +
> +What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_cap
> +Date:          April 2019
> +KernelVersion: 5.2
> +Contact:       Wu Hao <hao.wu@xxxxxxxxx>
> +Description:   Read-Write. Read this file to get current hardware power
> +               threshold1 in uW. If power consumption rises at or above
> +               this threshold, hardware starts 50% throttling.
> +               Write this file to set current hardware power threshold1 in uW.
> +               As hardware only accepts values in Watts, so input value will
> +               be round down per Watts (< 1 watts part will be discarded).
> +               Write fails with -EINVAL if input parsing fails or input isn't
> +               in the valid range (0 - 127000000 uW).
> +
> +What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit
> +Date:          April 2019
> +KernelVersion: 5.2
> +Contact:       Wu Hao <hao.wu@xxxxxxxxx>
> +Description:   Read-Write. Read this file to get current hardware power
> +               threshold2 in uW. If power consumption rises at or above
> +               this threshold, hardware starts 90% throttling.
> +               Write this file to set current hardware power threshold2 in uW.
> +               As hardware only accepts values in Watts, so input value will
> +               be round down per Watts (< 1 watts part will be discarded).
> +               Write fails with -EINVAL if input parsing fails or input isn't
> +               in the valid range (0 - 127000000 uW).
> +
> +What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_cap_status
> +Date:          April 2019
> +KernelVersion: 5.2
> +Contact:       Wu Hao <hao.wu@xxxxxxxxx>
> +Description:   Read-only. It returns 1 if power consumption is currently at or
> +               above hardware threshold1 (see 'power1_cap'), otherwise 0.
> +
> +What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit_status
> +Date:          April 2019
> +KernelVersion: 5.2
> +Contact:       Wu Hao <hao.wu@xxxxxxxxx>
> +Description:   Read-only. It returns 1 if power consumption is currently at or
> +               above hardware threshold2 (see 'power1_crit'), otherwise 0.
> +
> +What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_xeon_limit
> +Date:          April 2019
> +KernelVersion: 5.2
> +Contact:       Wu Hao <hao.wu@xxxxxxxxx>
> +Description:   Read-Only. It returns power limit for XEON in uW.
> +
> +What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_fpga_limit
> +Date:          April 2019
> +KernelVersion: 5.2
> +Contact:       Wu Hao <hao.wu@xxxxxxxxx>
> +Description:   Read-Only. It returns power limit for FPGA in uW.
> +
> +What:          /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_ltr
> +Date:          April 2019
> +KernelVersion: 5.2
> +Contact:       Wu Hao <hao.wu@xxxxxxxxx>
> +Description:   Read-only. Read this file to get current Latency Tolerance
> +               Reporting (ltr) value. This ltr impacts the CPU low power
> +               state in integrated solution.
> diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> index b9a68b8..7005316 100644
> --- a/drivers/fpga/dfl-fme-main.c
> +++ b/drivers/fpga/dfl-fme-main.c
> @@ -425,6 +425,249 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
>         .uinit = fme_thermal_mgmt_uinit,
>  };
>
> +#define FME_PWR_STATUS         0x8
> +#define FME_LATENCY_TOLERANCE  BIT_ULL(18)
> +#define PWR_CONSUMED           GENMASK_ULL(17, 0)
> +
> +#define FME_PWR_THRESHOLD      0x10
> +#define PWR_THRESHOLD1         GENMASK_ULL(6, 0)       /* in Watts */
> +#define PWR_THRESHOLD2         GENMASK_ULL(14, 8)      /* in Watts */
> +#define PWR_THRESHOLD_MAX      0x7f                    /* in Watts */
> +#define PWR_THRESHOLD1_STATUS  BIT_ULL(16)
> +#define PWR_THRESHOLD2_STATUS  BIT_ULL(17)
> +
> +#define FME_PWR_XEON_LIMIT     0x18
> +#define XEON_PWR_LIMIT         GENMASK_ULL(14, 0)      /* in 0.1 Watts */
> +#define XEON_PWR_EN            BIT_ULL(15)
> +#define FME_PWR_FPGA_LIMIT     0x20
> +#define FPGA_PWR_LIMIT         GENMASK_ULL(14, 0)      /* in 0.1 Watts */
> +#define FPGA_PWR_EN            BIT_ULL(15)
> +
> +#define PWR_THRESHOLD_MAX_IN_UW (PWR_THRESHOLD_MAX * 1000000)
> +
> +static int power_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> +                           u32 attr, int channel, long *val)
> +{
> +       struct dfl_feature *feature = dev_get_drvdata(dev);
> +       u64 v;
> +
> +       switch (attr) {
> +       case hwmon_power_input:
> +               v = readq(feature->ioaddr + FME_PWR_STATUS);
> +               *val = (long)(FIELD_GET(PWR_CONSUMED, v) * 1000000);
> +               break;
> +       case hwmon_power_cap:
> +               v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> +               *val = (long)(FIELD_GET(PWR_THRESHOLD1, v) * 1000000);
> +               break;
> +       case hwmon_power_crit:
> +               v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> +               *val = (long)(FIELD_GET(PWR_THRESHOLD2, v) * 1000000);
> +               break;
> +       default:
> +               return -EOPNOTSUPP;
> +       }
> +
> +       return 0;
> +}
> +
> +static int power_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
> +                            u32 attr, int channel, long val)
> +{
> +       struct dfl_feature_platform_data *pdata = dev_get_platdata(dev->parent);
> +       struct dfl_feature *feature = dev_get_drvdata(dev);
> +       int ret = 0;
> +       u64 v;
> +
> +       if (val < 0 || val > PWR_THRESHOLD_MAX_IN_UW)
> +               return -EINVAL;
> +
> +       val = val / 1000000;
> +
> +       mutex_lock(&pdata->lock);
> +
> +       switch (attr) {
> +       case hwmon_power_cap:
> +               v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> +               v &= ~PWR_THRESHOLD1;
> +               v |= FIELD_PREP(PWR_THRESHOLD1, val);
> +               writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
> +               break;
> +       case hwmon_power_crit:
> +               v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> +               v &= ~PWR_THRESHOLD2;
> +               v |= FIELD_PREP(PWR_THRESHOLD2, val);
> +               writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
> +               break;
> +       default:
> +               ret = -EOPNOTSUPP;
> +               break;
> +       }
> +
> +       mutex_unlock(&pdata->lock);
> +
> +       return ret;
> +}
> +
> +static umode_t power_hwmon_attrs_visible(const void *drvdata,
> +                                        enum hwmon_sensor_types type,
> +                                        u32 attr, int channel)
> +{
> +       switch (attr) {
> +       case hwmon_power_input:
> +               return 0444;
> +       case hwmon_power_cap:
> +       case hwmon_power_crit:
> +               return 0644;
> +       }
> +
> +       return 0;
> +}
> +
> +static const u32 power_hwmon_config[] = {
> +       HWMON_P_INPUT | HWMON_P_CAP | HWMON_P_CRIT,
> +       0
> +};
> +
> +static const struct hwmon_channel_info hwmon_pwr_info = {
> +       .type = hwmon_power,
> +       .config = power_hwmon_config,
> +};
> +
> +static const struct hwmon_channel_info *power_hwmon_info[] = {
> +       &hwmon_pwr_info,
> +       NULL
> +};
> +
> +static const struct hwmon_ops power_hwmon_ops = {
> +       .is_visible = power_hwmon_attrs_visible,
> +       .read = power_hwmon_read,
> +       .write = power_hwmon_write,
> +};
> +
> +static const struct hwmon_chip_info power_hwmon_chip_info = {
> +       .ops = &power_hwmon_ops,
> +       .info = power_hwmon_info,
> +};
> +
> +static ssize_t power1_cap_status_show(struct device *dev,
> +                                     struct device_attribute *attr, char *buf)
> +{
> +       struct dfl_feature *feature = dev_get_drvdata(dev);
> +       u64 v;
> +
> +       v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> +
> +       return scnprintf(buf, PAGE_SIZE, "%u\n",
> +                        (unsigned int)FIELD_GET(PWR_THRESHOLD1_STATUS, v));
> +}
> +
> +static ssize_t power1_crit_status_show(struct device *dev,
> +                                      struct device_attribute *attr, char *buf)
> +{
> +       struct dfl_feature *feature = dev_get_drvdata(dev);
> +       u64 v;
> +
> +       v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> +
> +       return scnprintf(buf, PAGE_SIZE, "%u\n",
> +                        (unsigned int)FIELD_GET(PWR_THRESHOLD2_STATUS, v));
> +}
> +
> +static ssize_t power1_xeon_limit_show(struct device *dev,
> +                                     struct device_attribute *attr, char *buf)
> +{
> +       struct dfl_feature *feature = dev_get_drvdata(dev);
> +       u16 xeon_limit = 0;
> +       u64 v;
> +
> +       v = readq(feature->ioaddr + FME_PWR_XEON_LIMIT);
> +
> +       if (FIELD_GET(XEON_PWR_EN, v))
> +               xeon_limit = FIELD_GET(XEON_PWR_LIMIT, v);
> +
> +       return scnprintf(buf, PAGE_SIZE, "%u\n", xeon_limit * 100000);
> +}
> +
> +static ssize_t power1_fpga_limit_show(struct device *dev,
> +                                     struct device_attribute *attr, char *buf)
> +{
> +       struct dfl_feature *feature = dev_get_drvdata(dev);
> +       u16 fpga_limit = 0;
> +       u64 v;
> +
> +       v = readq(feature->ioaddr + FME_PWR_FPGA_LIMIT);
> +
> +       if (FIELD_GET(FPGA_PWR_EN, v))
> +               fpga_limit = FIELD_GET(FPGA_PWR_LIMIT, v);
> +
> +       return scnprintf(buf, PAGE_SIZE, "%u\n", fpga_limit * 100000);
> +}
> +
> +static ssize_t power1_ltr_show(struct device *dev,
> +                              struct device_attribute *attr, char *buf)
> +{
> +       struct dfl_feature *feature = dev_get_drvdata(dev);
> +       u64 v;
> +
> +       v = readq(feature->ioaddr + FME_PWR_STATUS);
> +
> +       return scnprintf(buf, PAGE_SIZE, "%u\n",
> +                        (unsigned int)FIELD_GET(FME_LATENCY_TOLERANCE, v));
> +}
> +
> +static DEVICE_ATTR_RO(power1_cap_status);
> +static DEVICE_ATTR_RO(power1_crit_status);
> +static DEVICE_ATTR_RO(power1_xeon_limit);
> +static DEVICE_ATTR_RO(power1_fpga_limit);
> +static DEVICE_ATTR_RO(power1_ltr);
> +
> +static struct attribute *power_extra_attrs[] = {
> +       &dev_attr_power1_cap_status.attr,
> +       &dev_attr_power1_crit_status.attr,
> +       &dev_attr_power1_xeon_limit.attr,
> +       &dev_attr_power1_fpga_limit.attr,
> +       &dev_attr_power1_ltr.attr,
> +       NULL
> +};
> +
> +ATTRIBUTE_GROUPS(power_extra);
> +
> +static int fme_power_mgmt_init(struct platform_device *pdev,
> +                              struct dfl_feature *feature)
> +{
> +       struct device *hwmon;
> +
> +       dev_dbg(&pdev->dev, "FME Power Management Init.\n");
> +
> +       hwmon = devm_hwmon_device_register_with_info(&pdev->dev,
> +                                                    "dfl_fme_power", feature,
> +                                                    &power_hwmon_chip_info,
> +                                                    power_extra_groups);
> +       if (IS_ERR(hwmon)) {
> +               dev_err(&pdev->dev, "Fail to register power hwmon\n");
> +               return PTR_ERR(hwmon);
> +       }
> +
> +       return 0;
> +}
> +
> +static void fme_power_mgmt_uinit(struct platform_device *pdev,
> +                                struct dfl_feature *feature)
> +{
> +       dev_dbg(&pdev->dev, "FME Power Management UInit.\n");
> +}
> +
> +static const struct dfl_feature_id fme_power_mgmt_id_table[] = {
> +       {.id = FME_FEATURE_ID_POWER_MGMT,},
> +       {0,}
> +};
> +
> +static const struct dfl_feature_ops fme_power_mgmt_ops = {
> +       .init = fme_power_mgmt_init,
> +       .uinit = fme_power_mgmt_uinit,
> +};
> +
>  static struct dfl_feature_driver fme_feature_drvs[] = {
>         {
>                 .id_table = fme_hdr_id_table,
> @@ -439,6 +682,10 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
>                 .ops = &fme_thermal_mgmt_ops,
>         },
>         {
> +               .id_table = fme_power_mgmt_id_table,
> +               .ops = &fme_power_mgmt_ops,
> +       },
> +       {
>                 .ops = NULL,
>         },
>  };
> --
> 1.8.3.1
>