Re: linux-next: manual merge of the char-misc tree with the arm-soc tree

[Stephen Rothwell]

Hi all,

On Tue, 30 Apr 2019 17:40:51 +1000 Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
>
> Today's linux-next merge of the char-misc tree got conflicts in:
> 
>   drivers/misc/Kconfig
>   drivers/misc/Makefile
> 
> between commit:
> 
>   524feb799408 ("soc: add aspeed folder and misc drivers")
> 
> from the arm-soc tree and commit:
> 
>   01c60dcea9f7 ("drivers/misc: Add Aspeed P2A control driver")
> 
> from the char-misc tree.
> 
> I fixed it up (see below - though the additions probably want to be
> moved as in the arm-soc commit) and can carry the fix as necessary.
> This is now fixed as far as linux-next is concerned, but any non
> trivial conflicts should be mentioned to your upstream maintainer when
> your tree is submitted for merging.  You may also want to consider
> cooperating with the maintainer of the conflicting tree to minimise any
> particularly complex conflicts.
> 
> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc drivers/misc/Kconfig
> index b80cb6af0cb4,3209ee020b15..000000000000
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@@ -496,6 -496,30 +496,14 @@@ config VEXPRESS_SYSCF
>   	  bus. System Configuration interface is one of the possible means
>   	  of generating transactions on this bus.
>   
> + config ASPEED_P2A_CTRL
> + 	depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> + 	tristate "Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC bridge control"
> + 	help
> + 	  Control Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC mappings through
> + 	  ioctl()s, the driver also provides an interface for userspace mappings to
> + 	  a pre-defined region.
> + 
>  -config ASPEED_LPC_CTRL
>  -	depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
>  -	tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
>  -	---help---
>  -	  Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
>  -	  ioctl()s, the driver also provides a read/write interface to a BMC ram
>  -	  region where the host LPC read/write region can be buffered.
>  -
>  -config ASPEED_LPC_SNOOP
>  -	tristate "Aspeed ast2500 HOST LPC snoop support"
>  -	depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
>  -	help
>  -	  Provides a driver to control the LPC snoop interface which
>  -	  allows the BMC to listen on and save the data written by
>  -	  the host to an arbitrary LPC I/O port.
>  -
>   config PCI_ENDPOINT_TEST
>   	depends on PCI
>   	select CRC32
> diff --cc drivers/misc/Makefile
> index b9affcdaa3d6,c36239573a5c..000000000000
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@@ -54,6 -54,9 +54,7 @@@ obj-$(CONFIG_GENWQE)		+= genwqe
>   obj-$(CONFIG_ECHO)		+= echo/
>   obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
>   obj-$(CONFIG_CXL_BASE)		+= cxl/
>  -obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
>  -obj-$(CONFIG_ASPEED_LPC_SNOOP)	+= aspeed-lpc-snoop.o
> + obj-$(CONFIG_ASPEED_P2A_CTRL)	+= aspeed-p2a-ctrl.o
>   obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
>   obj-$(CONFIG_OCXL)		+= ocxl/
>   obj-y				+= cardreader/

This is now a conflict between the arm-soc tree and Linus' tree.

-- 
Cheers,
Stephen Rothwell

Attachment: pgpJQoDIwlcTz.pgp
Description: OpenPGP digital signature