Re: [PATCH RFC 4/6] ARM: dts: msm8974: add display support

[Rob Clark]

On Thu, May 9, 2019 at 12:12 AM Brian Masney <masneyb@xxxxxxxxxxxxx> wrote:
>
> On Wed, May 08, 2019 at 08:00:47PM -0700, Bjorn Andersson wrote:
> > On Wed 08 May 19:25 PDT 2019, Rob Clark wrote:
> >
> > > On Wed, May 8, 2019 at 7:16 PM Brian Masney <masneyb@xxxxxxxxxxxxx> wrote:
> > > >
> > > > On Mon, May 06, 2019 at 11:39:02PM -0700, Bjorn Andersson wrote:
> > > > > On Sun 05 May 06:04 PDT 2019, Brian Masney wrote:
> > > > > > diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> > > > > [..]
> > > > > > +                           clocks = <&mmcc MDSS_MDP_CLK>,
> > > > > > +                                    <&mmcc MDSS_AHB_CLK>,
> > > > > > +                                    <&mmcc MDSS_AXI_CLK>,
> > > > > > +                                    <&mmcc MDSS_BYTE0_CLK>,
> > > > > > +                                    <&mmcc MDSS_PCLK0_CLK>,
> > > > > > +                                    <&mmcc MDSS_ESC0_CLK>,
> > > > > > +                                    <&mmcc MMSS_MISC_AHB_CLK>;
> > > > > > +                           clock-names = "mdp_core",
> > > > > > +                                         "iface",
> > > > > > +                                         "bus",
> > > > > > +                                         "byte",
> > > > > > +                                         "pixel",
> > > > > > +                                         "core",
> > > > > > +                                         "core_mmss";
> > > > >
> > > > > Unless I enable MMSS_MMSSNOC_AXI_CLK and MMSS_S0_AXI_CLK I get some
> > > > > underrun error from DSI. You don't see anything like this?
> > > > >
> > > > > (These clocks are controlled by msm_bus downstream and should be driven
> > > > > by interconnect upstream)
> > > > >
> > > > >
> > > > > Apart from this, I think this looks nice. Happy to see the progress.
> > > >
> > > > No, I'm not seeing an underrun errors from the DSI. I think the clocks
> > > > are fine since I'm able to get this working with 4.17 using these same
> > > > clocks. I just sent out v2 and the cover letter has some details, along
> > > > with the full dmesg.
> > >
> > > since we don't have interconnect driver for 8974, I guess there is
> > > some chance that things work or not based on how lk leaves things?
> > >
> >
> > Right, I guess the bootloader on my device does not leave the busses
> > ticking - perhaps there's a boot splash involved on Brian's device?
> >
> > Regardless, this works on Nexus 5 and allows Brian to make further
> > progress so I'm all for merging it.
>
> There is a boot splash on the Nexus 5 and that may explain a behavior
> that I observed. I attempted to add reset GPIO support to the simple
> panel driver and the screen will clear but nothing will come on the
> screen after a hard reset, even on 4.17. To be sure, I got the timing
> information for how long to leave the GPIO high and low from the
> downstream MSM 3.4 sources. That's when I had a script port all of the
> ~400 panel on commands in the downstream device tree to a new panel
> driver.
>
> With the latest kernel kernel having a delay showing the console text,
> I observe a brief second where the boot splash is shown along with the
> startup text from Linux. A full refresh is performed and the boot
> splash goes away. I don't see this with the 4.17 kernel; perhaps maybe
> the full refresh occurs quick enough that its not noticeable.
>
> Can you point me to where the interconnect API is in the downstream
> MSM 3.4 sources? https://github.com/AICP/kernel_lge_hammerhead
> It looks like its in drivers/interconnect/ in the upstream sources.
>

Looks like this is the thing:

https://github.com/AICP/kernel_lge_hammerhead/tree/n7.1/arch/arm/mach-msm/msm_bus

(ahh, mach-msm... blast from the past..)

BR,
-R