[PATCH 5.0 90/95] Bluetooth: hci_bcm: Fix empty regulator supplies for Intel Macs

From: Greg Kroah-Hartman
Date: Thu May 09 2019 - 14:59:19 EST


From: Chen-Yu Tsai <wens@xxxxxxxx>

commit 62611abc8f37d00e3b0cff0eb2d72fa92b05fd27 upstream.

The code path for Macs goes through bcm_apple_get_resources(), which
skips over the code that sets up the regulator supplies. As a result,
the call to regulator_bulk_enable() / regulator_bulk_disable() results
in a NULL pointer dereference.

This was reported on the kernel.org Bugzilla, bug 202963.

Unbreak Broadcom Bluetooth support on Intel Macs by checking if the
supplies were set up before enabling or disabling them.

The same does not need to be done for the clocks, as the common clock
framework API checks for NULL pointers.

Fixes: 75d11676dccb ("Bluetooth: hci_bcm: Add support for regulator supplies")
Cc: <stable@xxxxxxxxxxxxxxx> # 5.0.x
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
Tested-by: Imre Kaloz <kaloz@xxxxxxxxxxx>
Signed-off-by: Marcel Holtmann <marcel@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/bluetooth/hci_bcm.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)

--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -228,9 +228,15 @@ static int bcm_gpio_set_power(struct bcm
int err;

if (powered && !dev->res_enabled) {
- err = regulator_bulk_enable(BCM_NUM_SUPPLIES, dev->supplies);
- if (err)
- return err;
+ /* Intel Macs use bcm_apple_get_resources() and don't
+ * have regulator supplies configured.
+ */
+ if (dev->supplies[0].supply) {
+ err = regulator_bulk_enable(BCM_NUM_SUPPLIES,
+ dev->supplies);
+ if (err)
+ return err;
+ }

/* LPO clock needs to be 32.768 kHz */
err = clk_set_rate(dev->lpo_clk, 32768);
@@ -259,7 +265,13 @@ static int bcm_gpio_set_power(struct bcm
if (!powered && dev->res_enabled) {
clk_disable_unprepare(dev->txco_clk);
clk_disable_unprepare(dev->lpo_clk);
- regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies);
+
+ /* Intel Macs use bcm_apple_get_resources() and don't
+ * have regulator supplies configured.
+ */
+ if (dev->supplies[0].supply)
+ regulator_bulk_disable(BCM_NUM_SUPPLIES,
+ dev->supplies);
}

/* wait for device to power on and come out of reset */