[PATCH v3 06/30] mfd: cros_ec: use BIT macro

From: Gwendal Grignou
Date: Thu May 09 2019 - 17:15:29 EST

Next message: Gwendal Grignou: "[PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition"
Previous message: Gwendal Grignou: "[PATCH v3 03/30] mfd: cros_ec: set comments properly"
In reply to: Gwendal Grignou: "[PATCH v3 03/30] mfd: cros_ec: set comments properly"
Next in thread: Gwendal Grignou: "[PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Replace (1 << ...) with BIT().

Acked-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Acked-by: Benson Leung <bleung@xxxxxxxxxxxx>
Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
---
include/linux/mfd/cros_ec_commands.h | 110 +++++++++++++--------------
1 file changed, 55 insertions(+), 55 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 8ad77d8a9141..e97e9e976bd0 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -28,7 +28,7 @@
#define EC_PROTO_VERSION 0x00000002

/* Command version mask */
-#define EC_VER_MASK(version) (1UL << (version))
+#define EC_VER_MASK(version) BIT(version)

/* I/O addresses for ACPI commands */
#define EC_LPC_ADDR_ACPI_DATA 0x62
@@ -57,13 +57,13 @@
#define EC_HOST_CMD_REGION_SIZE 0x80

/* EC command register bit functions */
-#define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */
-#define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */
-#define EC_LPC_CMDR_BUSY (1 << 2) /* EC is busy processing a command */
-#define EC_LPC_CMDR_CMD (1 << 3) /* Last host write was a command */
-#define EC_LPC_CMDR_ACPI_BRST (1 << 4) /* Burst mode (not used) */
-#define EC_LPC_CMDR_SCI (1 << 5) /* SCI event is pending */
-#define EC_LPC_CMDR_SMI (1 << 6) /* SMI event is pending */
+#define EC_LPC_CMDR_DATA BIT(0) /* Data ready for host to read */
+#define EC_LPC_CMDR_PENDING BIT(1) /* Write pending to EC */
+#define EC_LPC_CMDR_BUSY BIT(2) /* EC is busy processing a command */
+#define EC_LPC_CMDR_CMD BIT(3) /* Last host write was a command */
+#define EC_LPC_CMDR_ACPI_BRST BIT(4) /* Burst mode (not used) */
+#define EC_LPC_CMDR_SCI BIT(5) /* SCI event is pending */
+#define EC_LPC_CMDR_SMI BIT(6) /* SMI event is pending */

#define EC_LPC_ADDR_MEMMAP 0x900
#define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */
@@ -110,8 +110,8 @@

/* Define the format of the accelerometer mapped memory status byte. */
#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f
-#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4)
-#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7)
+#define EC_MEMMAP_ACC_STATUS_BUSY_BIT BIT(4)
+#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT BIT(7)

/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
#define EC_TEMP_SENSOR_ENTRIES 16
@@ -336,7 +336,7 @@ enum host_event_code {
EC_HOST_EVENT_INVALID = 32
};
/* Host event mask */
-#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1))
+#define EC_HOST_EVENT_MASK(event_code) BIT_ULL((event_code) - 1)

/**
* struct ec_lpc_host_args - Arguments at EC_LPC_ADDR_HOST_ARGS
@@ -734,7 +734,7 @@ struct ec_response_get_cmd_versions {

/* Avoid using ec_status which is for return values */
enum ec_comms_status {
- EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */
+ EC_COMMS_STATUS_PROCESSING = BIT(0), /* Processing cmd */
};

/**
@@ -766,7 +766,7 @@ struct ec_response_test_protocol {

/* Flags for ec_response_get_protocol_info.flags */
/* EC_RES_IN_PROGRESS may be returned if a command is slow */
-#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0)
+#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED BIT(0)

/**
* struct ec_response_get_protocol_info - Response to the get protocol info.
@@ -925,8 +925,8 @@ enum ec_feature_code {
EC_FEATURE_ISH = 40,
};

-#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
-#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32))
+#define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32)
+#define EC_FEATURE_MASK_1(event_code) BIT(event_code - 32)

struct ec_response_get_features {
uint32_t flags[2];
@@ -961,7 +961,7 @@ struct ec_response_flash_info {
* Flags for version 1+ flash info command
* EC flash erases bits to 0 instead of 1.
*/
-#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
+#define EC_FLASH_INFO_ERASE_TO_0 BIT(0)

/**
* struct ec_response_flash_info_1 - Response to the flash info v1 command.
@@ -1061,26 +1061,26 @@ struct ec_params_flash_erase {

/* Flags for flash protection */
/* RO flash code protected when the EC boots */
-#define EC_FLASH_PROTECT_RO_AT_BOOT (1 << 0)
+#define EC_FLASH_PROTECT_RO_AT_BOOT BIT(0)
/*
* RO flash code protected now. If this bit is set, at-boot status cannot
* be changed.
*/
-#define EC_FLASH_PROTECT_RO_NOW (1 << 1)
+#define EC_FLASH_PROTECT_RO_NOW BIT(1)
/* Entire flash code protected now, until reboot. */
-#define EC_FLASH_PROTECT_ALL_NOW (1 << 2)
+#define EC_FLASH_PROTECT_ALL_NOW BIT(2)
/* Flash write protect GPIO is asserted now */
-#define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3)
+#define EC_FLASH_PROTECT_GPIO_ASSERTED BIT(3)
/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */
-#define EC_FLASH_PROTECT_ERROR_STUCK (1 << 4)
+#define EC_FLASH_PROTECT_ERROR_STUCK BIT(4)
/*
* Error - flash protection is in inconsistent state. At least one bank of
* flash which should be protected is not protected. Usually fixed by
* re-requesting the desired flags, or by a hard reset if that fails.
*/
-#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
+#define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5)
/* Entire flash code protected when the EC boots */
-#define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6)
+#define EC_FLASH_PROTECT_ALL_AT_BOOT BIT(6)

/**
* struct ec_params_flash_protect - Parameters for the flash protect command.
@@ -1451,8 +1451,8 @@ enum ec_led_id {
};

/* LED control flags */
-#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */
-#define EC_LED_FLAGS_AUTO (1 << 1) /* Switch LED back to automatic control */
+#define EC_LED_FLAGS_QUERY BIT(0) /* Query LED capability only */
+#define EC_LED_FLAGS_AUTO BIT(1) /* Switch LED back to automatic control */

enum ec_led_colors {
EC_LED_COLOR_RED = 0,
@@ -2116,13 +2116,13 @@ enum mkbp_config_flags {
};

enum mkbp_config_valid {
- EC_MKBP_VALID_SCAN_PERIOD = 1 << 0,
- EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1,
- EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3,
- EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4,
- EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5,
- EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6,
- EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7,
+ EC_MKBP_VALID_SCAN_PERIOD = BIT(0),
+ EC_MKBP_VALID_POLL_TIMEOUT = BIT(1),
+ EC_MKBP_VALID_MIN_POST_SCAN_DELAY = BIT(3),
+ EC_MKBP_VALID_OUTPUT_SETTLE = BIT(4),
+ EC_MKBP_VALID_DEBOUNCE_DOWN = BIT(5),
+ EC_MKBP_VALID_DEBOUNCE_UP = BIT(6),
+ EC_MKBP_VALID_FIFO_MAX_DEPTH = BIT(7),
};

/*
@@ -2176,7 +2176,7 @@ enum ec_collect_flags {
* Indicates this scan was processed by the EC. Due to timing, some
* scans may be skipped.
*/
- EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0,
+ EC_KEYSCAN_SEQ_FLAG_DONE = BIT(0),
};

struct ec_collect_item {
@@ -2543,7 +2543,7 @@ struct ec_params_console_read_v1 {
*/
#define EC_CMD_BATTERY_CUT_OFF 0x0099

-#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0)
+#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN BIT(0)

struct ec_params_battery_cutoff {
uint8_t flags;
@@ -2614,13 +2614,13 @@ struct ec_response_power_info {
#define EC_CMD_I2C_PASSTHRU 0x009E

/* Read data; if not present, message is a write */
-#define EC_I2C_FLAG_READ (1 << 15)
+#define EC_I2C_FLAG_READ BIT(15)

/* Mask for address */
#define EC_I2C_ADDR_MASK 0x3ff

-#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */
-#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */
+#define EC_I2C_STATUS_NAK BIT(0) /* Transfer was not acknowledged */
+#define EC_I2C_STATUS_TIMEOUT BIT(1) /* Timeout during transfer */

/* Any error */
#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
@@ -2650,27 +2650,27 @@ struct ec_response_i2c_passthru {

/* Reasons to start hang detection timer */
/* Power button pressed */
-#define EC_HANG_START_ON_POWER_PRESS (1 << 0)
+#define EC_HANG_START_ON_POWER_PRESS BIT(0)

/* Lid closed */
-#define EC_HANG_START_ON_LID_CLOSE (1 << 1)
+#define EC_HANG_START_ON_LID_CLOSE BIT(1)

/* Lid opened */
-#define EC_HANG_START_ON_LID_OPEN (1 << 2)
+#define EC_HANG_START_ON_LID_OPEN BIT(2)

/* Start of AP S3->S0 transition (booting or resuming from suspend) */
-#define EC_HANG_START_ON_RESUME (1 << 3)
+#define EC_HANG_START_ON_RESUME BIT(3)

/* Reasons to cancel hang detection */

/* Power button released */
-#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8)
+#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8)

/* Any host command from AP received */
-#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9)
+#define EC_HANG_STOP_ON_HOST_COMMAND BIT(9)

/* Stop on end of AP S0->S3 transition (suspending or shutting down) */
-#define EC_HANG_STOP_ON_SUSPEND (1 << 10)
+#define EC_HANG_STOP_ON_SUSPEND BIT(10)

/*
* If this flag is set, all the other fields are ignored, and the hang detect
@@ -2678,14 +2678,14 @@ struct ec_response_i2c_passthru {
* without reconfiguring any of the other hang detect settings. Note that
* you must previously have configured the timeouts.
*/
-#define EC_HANG_START_NOW (1 << 30)
+#define EC_HANG_START_NOW BIT(30)

/*
* If this flag is set, all the other fields are ignored (including
* EC_HANG_START_NOW). This provides the AP a way to stop the hang timer
* without reconfiguring any of the other hang detect settings.
*/
-#define EC_HANG_STOP_NOW (1 << 31)
+#define EC_HANG_STOP_NOW BIT(31)

struct ec_params_hang_detect {
/* Flags; see EC_HANG_* */
@@ -3040,8 +3040,8 @@ enum ec_reboot_cmd {
};

/* Flags for ec_params_reboot_ec.reboot_flags */
-#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */
-#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */
+#define EC_REBOOT_FLAG_RESERVED0 BIT(0) /* Was recovery request */
+#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN BIT(1) /* Reboot after AP shutdown */

struct ec_params_reboot_ec {
uint8_t cmd; /* enum ec_reboot_cmd */
@@ -3343,9 +3343,9 @@ struct ec_params_usb_pd_control {
uint8_t swap;
} __ec_align1;

-#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
-#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
-#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
+#define PD_CTRL_RESP_ENABLED_COMMS BIT(0) /* Communication enabled */
+#define PD_CTRL_RESP_ENABLED_CONNECTED BIT(1) /* Device connected */
+#define PD_CTRL_RESP_ENABLED_PD_CAPABLE BIT(2) /* Partner is PD capable */

#define PD_CTRL_RESP_ROLE_POWER BIT(0) /* 0=SNK/1=SRC */
#define PD_CTRL_RESP_ROLE_DATA BIT(1) /* 0=UFP/1=DFP */
@@ -3545,10 +3545,10 @@ struct ec_params_usb_pd_mux_info {
} __ec_align1;

/* Flags representing mux state */
-#define USB_PD_MUX_USB_ENABLED (1 << 0)
-#define USB_PD_MUX_DP_ENABLED (1 << 1)
-#define USB_PD_MUX_POLARITY_INVERTED (1 << 2)
-#define USB_PD_MUX_HPD_IRQ (1 << 3)
+#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */
+#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */
+#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
+#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */

struct ec_response_usb_pd_mux_info {
uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
--
2.21.0.1020.gf2820cf01a-goog

Next message: Gwendal Grignou: "[PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition"
Previous message: Gwendal Grignou: "[PATCH v3 03/30] mfd: cros_ec: set comments properly"
In reply to: Gwendal Grignou: "[PATCH v3 03/30] mfd: cros_ec: set comments properly"
Next in thread: Gwendal Grignou: "[PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]