Re: [PATCH 1/5] iio: stmpe-adc: Add compatible name

[Jonathan Cameron]

On Tue,  7 May 2019 16:36:11 +0200
Philippe Schenker <dev@xxxxxxxxxxxx> wrote:

> From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> 
> Add the compatible name to the driver so it gets loaded when the proper
> node in DT is detected.
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
Applied thanks,

Jonathan

> ---
> 
>  drivers/iio/adc/stmpe-adc.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
> index 37f4b74a5d32..9ec338ba3440 100644
> --- a/drivers/iio/adc/stmpe-adc.c
> +++ b/drivers/iio/adc/stmpe-adc.c
> @@ -354,9 +354,14 @@ static struct platform_driver stmpe_adc_driver = {
>  		.pm	= &stmpe_adc_pm_ops,
>  	},
>  };
> -
>  module_platform_driver(stmpe_adc_driver);
>  
> +static const struct of_device_id stmpe_adc_ids[] = {
> +	{ .compatible = "st,stmpe-adc", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
> +
>  MODULE_AUTHOR("Stefan Agner <stefan.agner@xxxxxxxxxxx>");
>  MODULE_DESCRIPTION("STMPEXXX ADC driver");
>  MODULE_LICENSE("GPL v2");