Re: [PATCH 4/5] iio: stmpe-adc: Use wait_for_completion_timeout

[Philippe Schenker]

On Sat, 2019-05-11 at 11:15 +0100, Jonathan Cameron wrote:
> On Tue,  7 May 2019 16:36:14 +0200
> Philippe Schenker <dev@xxxxxxxxxxxx> wrote:
> 
> > From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> > 
> > Use wait_for_completion_timeout instead of
> > wait_for_completion_interuptible_timeout.
> > 
> > The interruptible variant gets constantly interrupted if a user
> > program is compiled with the -pg option.
> > The killable variant was not used due to the fact that a second
> > program, reading on this device, that gets killed is then also killing
> > that wait.
> > 
> > Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> Hi Phillippe
> 
> This one clashed a little bit with our earlier patch to remove the
> unnecessary assignment.  I've applied it by hand but please check it.
> 
> Applied to the togreg branch of iio.git and pushed out as testing
> for the autobuilders to play with it.
> 
> Thanks,
> 
> Jonathan

Hmm, yeah I see it sorry for that! Somehow that line went in again in this
patch. Don't know why... Anyway I checked it and it looks good. Thank you!

Philippe

> > ---
> > 
> >  drivers/iio/adc/stmpe-adc.c | 18 ++++--------------
> >  1 file changed, 4 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
> > index 82b43e4522b6..cc752a47444c 100644
> > --- a/drivers/iio/adc/stmpe-adc.c
> > +++ b/drivers/iio/adc/stmpe-adc.c
> > @@ -77,17 +77,11 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
> >  	stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT,
> >  			STMPE_ADC_CH(info->channel));
> >  
> > -	*val = info->value;
> > -
> > -	ret = wait_for_completion_interruptible_timeout
> > -		(&info->completion, STMPE_ADC_TIMEOUT);
> > +	ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
> >  
> >  	if (ret <= 0) {
> >  		mutex_unlock(&info->lock);
> > -		if (ret == 0)
> > -			return -ETIMEDOUT;
> > -		else
> > -			return ret;
> > +		return -ETIMEDOUT;
> >  	}
> >  
> >  	*val = info->value;
> > @@ -116,15 +110,11 @@ static int stmpe_read_temp(struct stmpe_adc *info,
> >  	stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL,
> >  			STMPE_START_ONE_TEMP_CONV);
> >  
> > -	ret = wait_for_completion_interruptible_timeout
> > -		(&info->completion, STMPE_ADC_TIMEOUT);
> > +	ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
> >  
> >  	if (ret <= 0) {
> >  		mutex_unlock(&info->lock);
> > -		if (ret == 0)
> > -			return -ETIMEDOUT;
> > -		else
> > -			return ret;
> > +		return -ETIMEDOUT;
> >  	}
> >  
> >  	/*