[PATCH v12 0/2] PWM support for HiFive Unleashed

[Yash Shah]

This patch series adds a PWM driver and DT documentation
for HiFive Unleashed board. The patches are mostly based on
Wesley's patch.

This patchset is based on Linux v5.1 and tested on HiFive Unleashed board
with additional board related patches needed for testing can be found at
dev/yashs/pwm branch of:
https://github.com/yashshah7/riscv-linux.git

v12
- Rebased onto Mainline v5.1

v11
- Change naming convention for pwm_device and pwm_sifive_ddata pointers
- Assign of_pwm_xlate_with_flag() to of_xlate func ptr since this driver
  use three pwm-cells (Issue reported by Andreas Schwab <schwab@xxxxxxx>
- Other minor fixes

v10
- Use DIV_ROUND_CLOSEST_ULL instead of div_u64_round
- Change 'num' defination to u64 bit (in pwm_sifive_apply).
- Remove the usage of pwm_get_state()

v9
- Use appropriate bitfield macros
- Add approx_period in pwm_sifive_ddata struct and related changes
- Correct the eqn for calculation of frac (in pwm_sifive_apply)
- Other minor fixes

v8
- Typo corrections
- Remove active_user and related code
- Do not clear PWM_SIFIVE_PWMCFG_EN_ALWAYS
- Other minor fixes

v7
- Modify description of compatible property in DT documentation
- Use mutex locks at appropriate places
- Fix all bad line breaks
- Allow enabling/disabling PWM only when the user is the only active user
- Remove Deglitch logic
- Other minor fixes

v6
- Remove the global property 'sifive,period-ns'
- Implement free and request callbacks to maintain user counts.
- Add user_count member to struct pwm_sifive_ddata
- Allow period change only if user_count is one
- Add pwm_sifive_enable function to enable/disable PWM
- Change calculation logic of frac (in pwm_sifive_apply)
- Remove state correction
- Remove pwm_sifive_xlate function
- Clock to be enabled only when PWM is enabled
- Other minor fixes

v5
- Correct the order of compatible string properties
- PWM state correction to be done always
- Other minor fixes based upon feedback on v4

v4
- Rename macros with appropriate names
- Remove unused macros
- Rename struct sifive_pwm_device to struct pwm_sifive_ddata
- Rename function prefix as per driver name
- Other minor fixes based upon feedback on v3

v3
- Add a link to the reference manaul
- Use appropriate apis for division operation
- Add check for polarity
- Enable clk before calling clk_get_rate
- Other minor fixes based upon feedback on v2

V2 changed from V1:
- Remove inclusion of dt-bindings/pwm/pwm.h
- Remove artificial alignments
- Replace ioread32/iowrite32 with readl/writel
- Remove camelcase
- Change dev_info to dev_dbg for unnecessary log
- Correct typo in driver name
- Remove use of of_match_ptr macro
- Update the DT compatible strings and Add reference to a common
  versioning document

Yash Shah (2):
  pwm: sifive: Add DT documentation for SiFive PWM Controller
  pwm: sifive: Add a driver for SiFive SoC PWM

 .../devicetree/bindings/pwm/pwm-sifive.txt         |  33 ++
 drivers/pwm/Kconfig                                |  11 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-sifive.c                           | 338 +++++++++++++++++++++
 4 files changed, 383 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt
 create mode 100644 drivers/pwm/pwm-sifive.c

-- 
1.9.1