[PATCH v6 11/12] Documentation: PCI: convert endpoint/pci-test-function.txt to reST

[Changbin Du]

This converts the plain text documentation to reStructuredText format and
add it to Sphinx TOC tree. No essential content change.

Signed-off-by: Changbin Du <changbin.du@xxxxxxxxx>
Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
 Documentation/PCI/endpoint/index.rst          |  1 +
 ...est-function.txt => pci-test-function.rst} | 84 +++++++++++--------
 2 files changed, 51 insertions(+), 34 deletions(-)
 rename Documentation/PCI/endpoint/{pci-test-function.txt => pci-test-function.rst} (55%)

diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst
index 3951de9f923c..b680a3fc4fec 100644
--- a/Documentation/PCI/endpoint/index.rst
+++ b/Documentation/PCI/endpoint/index.rst
@@ -9,3 +9,4 @@ PCI Endpoint Framework
 
    pci-endpoint
    pci-endpoint-cfs
+   pci-test-function
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.rst
similarity index 55%
rename from Documentation/PCI/endpoint/pci-test-function.txt
rename to Documentation/PCI/endpoint/pci-test-function.rst
index 5916f1f592bb..3c8521d7aa31 100644
--- a/Documentation/PCI/endpoint/pci-test-function.txt
+++ b/Documentation/PCI/endpoint/pci-test-function.rst
@@ -1,5 +1,10 @@
-				PCI TEST
-		    Kishon Vijay Abraham I <kishon@xxxxxx>
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+PCI Test Function
+=================
+
+:Author: Kishon Vijay Abraham I <kishon@xxxxxx>
 
 Traditionally PCI RC has always been validated by using standard
 PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
@@ -23,65 +28,76 @@ The PCI endpoint test device has the following registers:
 	8) PCI_ENDPOINT_TEST_IRQ_TYPE
 	9) PCI_ENDPOINT_TEST_IRQ_NUMBER
 
-*) PCI_ENDPOINT_TEST_MAGIC
+* PCI_ENDPOINT_TEST_MAGIC
 
 This register will be used to test BAR0. A known pattern will be written
 and read back from MAGIC register to verify BAR0.
 
-*) PCI_ENDPOINT_TEST_COMMAND:
+* PCI_ENDPOINT_TEST_COMMAND
 
 This register will be used by the host driver to indicate the function
 that the endpoint device must perform.
 
-Bitfield Description:
-  Bit 0		: raise legacy IRQ
-  Bit 1		: raise MSI IRQ
-  Bit 2		: raise MSI-X IRQ
-  Bit 3		: read command (read data from RC buffer)
-  Bit 4		: write command (write data to RC buffer)
-  Bit 5		: copy command (copy data from one RC buffer to another
-		  RC buffer)
+========	================================================================
+Bitfield	Description
+========	================================================================
+Bit 0		raise legacy IRQ
+Bit 1		raise MSI IRQ
+Bit 2		raise MSI-X IRQ
+Bit 3		read command (read data from RC buffer)
+Bit 4		write command (write data to RC buffer)
+Bit 5		copy command (copy data from one RC buffer to another RC buffer)
+========	================================================================
 
-*) PCI_ENDPOINT_TEST_STATUS
+* PCI_ENDPOINT_TEST_STATUS
 
 This register reflects the status of the PCI endpoint device.
 
-Bitfield Description:
-  Bit 0		: read success
-  Bit 1		: read fail
-  Bit 2		: write success
-  Bit 3		: write fail
-  Bit 4		: copy success
-  Bit 5		: copy fail
-  Bit 6		: IRQ raised
-  Bit 7		: source address is invalid
-  Bit 8		: destination address is invalid
-
-*) PCI_ENDPOINT_TEST_SRC_ADDR
+========	==============================
+Bitfield	Description
+========	==============================
+Bit 0		read success
+Bit 1		read fail
+Bit 2		write success
+Bit 3		write fail
+Bit 4		copy success
+Bit 5		copy fail
+Bit 6		IRQ raised
+Bit 7		source address is invalid
+Bit 8		destination address is invalid
+========	==============================
+
+* PCI_ENDPOINT_TEST_SRC_ADDR
 
 This register contains the source address (RC buffer address) for the
 COPY/READ command.
 
-*) PCI_ENDPOINT_TEST_DST_ADDR
+* PCI_ENDPOINT_TEST_DST_ADDR
 
 This register contains the destination address (RC buffer address) for
 the COPY/WRITE command.
 
-*) PCI_ENDPOINT_TEST_IRQ_TYPE
+* PCI_ENDPOINT_TEST_IRQ_TYPE
 
 This register contains the interrupt type (Legacy/MSI) triggered
 for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands.
 
 Possible types:
- - Legacy	: 0
- - MSI		: 1
- - MSI-X	: 2
 
-*) PCI_ENDPOINT_TEST_IRQ_NUMBER
+======	==
+Legacy	0
+MSI	1
+MSI-X	2
+======	==
+
+* PCI_ENDPOINT_TEST_IRQ_NUMBER
 
 This register contains the triggered ID interrupt.
 
 Admissible values:
- - Legacy	: 0
- - MSI		: [1 .. 32]
- - MSI-X	: [1 .. 2048]
+
+======	===========
+Legacy	0
+MSI	[1 .. 32]
+MSI-X	[1 .. 2048]
+======	===========
-- 
2.20.1