[RFC PATCH] ASoC: simple-card: Fix configuration of DAI format

From: Jon Hunter
Date: Thu May 16 2019 - 13:53:37 EST


When configuring a codec to be both bit-clock and frame-master, it was
found that the codec was always configured as bit-clock and frame-slave.
Looking at the simple_dai_link_of() function there appears to be two
problems with the configuration of the DAI format, which are ...

1. The function asoc_simple_parse_daifmt() is called before the function
asoc_simple_parse_codec() and this means that the device-tree node
for the codec has not been parsed yet, which is needed by the
function asoc_simple_parse_daifmt() to determine who is the codec.
2. The phandle passed to asoc_simple_parse_daifmt() is the phandle to
the 'codec' node and not the phandle of the actual codec defined by
the 'sound-dai' property under the 'codec' node.

Fix the above by moving the call to asoc_simple_parse_daifmt() after the
the call to asoc_simple_parse_codec() and pass the phandle for the codec
to asoc_simple_parse_daifmt().

Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
sound/soc/generic/simple-card.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 9b568f578bcd..c2c8dcbcf795 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -283,11 +283,6 @@ static int simple_dai_link_of(struct asoc_simple_priv *priv,
codec_dai =
dai_props->codec_dai = &priv->dais[li->dais++];

- ret = asoc_simple_parse_daifmt(dev, node, codec,
- prefix, &dai_link->dai_fmt);
- if (ret < 0)
- goto dai_link_of_err;
-
simple_parse_mclk_fs(top, cpu, codec, dai_props, prefix);

ret = asoc_simple_parse_cpu(cpu, dai_link, &single_cpu);
@@ -298,6 +293,11 @@ static int simple_dai_link_of(struct asoc_simple_priv *priv,
if (ret < 0)
goto dai_link_of_err;

+ ret = asoc_simple_parse_daifmt(dev, node, dai_link->codecs->of_node,
+ prefix, &dai_link->dai_fmt);
+ if (ret < 0)
+ goto dai_link_of_err;
+
ret = asoc_simple_parse_platform(plat, dai_link);
if (ret < 0)
goto dai_link_of_err;
--
2.7.4