Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Thu, May 16, 2019 at 08:20:58PM +0000, Ghannam, Yazen wrote:
> We don't actually know if there are bits set in hardware until we read
> it back. So I don't think this is adding anything new.

Bah, of course. We need to read it first (pasting the whole function).
Now, __mcheck_cpu_init_clear_banks() gets called when we change
configuration too, in mce_cpu_restart() and if we do it this way, we'll
be rereading MCi_CTL each time but I don't see anything wrong with that.

Hmmm?

static void __mcheck_cpu_init_clear_banks(void)
{
        struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
        int i;

        for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
                struct mce_bank *b = &mce_banks[i];

                rdmsrl(msr_ops.ctl(i), b->ctl);

                /* Bank is initialized if bits are set in hardware. */
                b->init = !!b->ctl;
                if (b->init) {
                        wrmsrl(msr_ops.ctl(i), b->ctl);
                        wrmsrl(msr_ops.status(i), 0);
                }

        }
}

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.