Re: [Intel-wired-lan] i40e X722 RSS problem with NAT-Traversal IPsec packets
From: Alexander Duyck
Date: Thu May 16 2019 - 19:34:43 EST
On Thu, May 16, 2019 at 11:37 AM Lennart Sorensen
<lsorense@xxxxxxxxxxxxxxxxxxx> wrote:
>
> On Thu, May 16, 2019 at 02:34:08PM -0400, Lennart Sorensen wrote:
> > Here is what I see:
> >
> > i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.1.7-k
> > i40e: Copyright (c) 2013 - 2014 Intel Corporation.
> > i40e 0000:3d:00.0: fw 3.10.52896 api 1.6 nvm 4.00 0x80001577 1.1767.0
> > i40e 0000:3d:00.0: The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.
> > i40e 0000:3d:00.0: MAC address: a4:bf:01:4e:0c:87
> > i40e 0000:3d:00.0: flow_type: 63 input_mask:0x0000000000004000
> > i40e 0000:3d:00.0: flow_type: 46 input_mask:0x0007fff800000000
> > i40e 0000:3d:00.0: flow_type: 45 input_mask:0x0007fff800000000
> > i40e 0000:3d:00.0: flow_type: 44 input_mask:0x0007ffff80000000
> > i40e 0000:3d:00.0: flow_type: 43 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.0: flow_type: 42 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.0: flow_type: 41 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.0: flow_type: 40 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.0: flow_type: 39 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.0: flow_type: 36 input_mask:0x0006060000000000
> > i40e 0000:3d:00.0: flow_type: 35 input_mask:0x0006060000000000
> > i40e 0000:3d:00.0: flow_type: 34 input_mask:0x0006060780000000
> > i40e 0000:3d:00.0: flow_type: 33 input_mask:0x0006060600000000
> > i40e 0000:3d:00.0: flow_type: 32 input_mask:0x0006060600000000
> > i40e 0000:3d:00.0: flow_type: 31 input_mask:0x0006060600000000
> > i40e 0000:3d:00.0: flow_type: 30 input_mask:0x0006060600000000
> > i40e 0000:3d:00.0: flow_type: 29 input_mask:0x0006060600000000
> > i40e 0000:3d:00.0: Features: PF-id[0] VSIs: 34 QP: 12 TXQ: 13 RSS VxLAN Geneve VEPA
> > i40e 0000:3d:00.1: fw 3.10.52896 api 1.6 nvm 4.00 0x80001577 1.1767.0
> > i40e 0000:3d:00.1: The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.
> > i40e 0000:3d:00.1: MAC address: a4:bf:01:4e:0c:88
> > i40e 0000:3d:00.1: flow_type: 63 input_mask:0x0000000000004000
> > i40e 0000:3d:00.1: flow_type: 46 input_mask:0x0007fff800000000
> > i40e 0000:3d:00.1: flow_type: 45 input_mask:0x0007fff800000000
> > i40e 0000:3d:00.1: flow_type: 44 input_mask:0x0007ffff80000000
> > i40e 0000:3d:00.1: flow_type: 43 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.1: flow_type: 42 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.1: flow_type: 41 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.1: flow_type: 40 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.1: flow_type: 39 input_mask:0x0007fffe00000000
> > i40e 0000:3d:00.1: flow_type: 36 input_mask:0x0006060000000000
> > i40e 0000:3d:00.1: flow_type: 35 input_mask:0x0006060000000000
> > i40e 0000:3d:00.1: flow_type: 34 input_mask:0x0006060780000000
> > i40e 0000:3d:00.1: flow_type: 33 input_mask:0x0006060600000000
> > i40e 0000:3d:00.1: flow_type: 32 input_mask:0x0006060600000000
> > i40e 0000:3d:00.1: flow_type: 31 input_mask:0x0006060600000000
> > i40e 0000:3d:00.1: flow_type: 30 input_mask:0x0006060600000000
> > i40e 0000:3d:00.1: flow_type: 29 input_mask:0x0006060600000000
> > i40e 0000:3d:00.1: Features: PF-id[1] VSIs: 34 QP: 12 TXQ: 13 RSS VxLAN Geneve VEPA
> > i40e 0000:3d:00.1 eth2: NIC Link is Up, 1000 Mbps Full Duplex, Flow Control: None
> > i40e_ioctl: power down: eth1
> > i40e_ioctl: power down: eth2
>
> Those last two lines is something I added, so ignore those.
No problem.
So just looking at the data provided I am going to guess that IPv6 w/
UDP likely works without any issues and it is just going to be IPv4
that is the problem. When you compare the UDP setup from mine versus
yours it looks like for some reason somebody swapped around the input
bits for the L3 src and destination fields. I'm basing that on the
input set masks in the i40e_txrx.h header:
/* INPUT SET MASK for RSS, flow director, and flexible payload */
#define I40E_L3_SRC_SHIFT 47
#define I40E_L3_SRC_MASK (0x3ULL << I40E_L3_SRC_SHIFT)
#define I40E_L3_V6_SRC_SHIFT 43
#define I40E_L3_V6_SRC_MASK (0xFFULL << I40E_L3_V6_SRC_SHIFT)
#define I40E_L3_DST_SHIFT 35
#define I40E_L3_DST_MASK (0x3ULL << I40E_L3_DST_SHIFT)
#define I40E_L3_V6_DST_SHIFT 35
#define I40E_L3_V6_DST_MASK (0xFFULL << I40E_L3_V6_DST_SHIFT)
#define I40E_L4_SRC_SHIFT 34
#define I40E_L4_SRC_MASK (0x1ULL << I40E_L4_SRC_SHIFT)
#define I40E_L4_DST_SHIFT 33
#define I40E_L4_DST_MASK (0x1ULL << I40E_L4_DST_SHIFT)
#define I40E_VERIFY_TAG_SHIFT 31
#define I40E_VERIFY_TAG_MASK (0x3ULL << I40E_VERIFY_TAG_SHIFT)
The easiest way to verify would be to rewrite the registers for
flow_type 29, 30, and 31 to match the value that I had shown earlier
from my dump:
[ 294.687087] i40e 0000:81:00.1: flow_type: 31 input_mask:0x0001801e00000000
I will take a look at putting together a patch that can be tested to
verify if this is actually the issue tomorrow.
Thanks.
- Alex