Re: [PATCH v3] arm64: dts: ls1028a: Add USB dt nodes
From: Shawn Guo
Date: Thu May 16 2019 - 22:13:36 EST
On Wed, May 08, 2019 at 06:46:37AM +0000, Ran Wang wrote:
> This patch adds USB dt nodes for LS1028A.
>
> Signed-off-by: Ran Wang <ran.wang_1@xxxxxxx>
> ---
> Changes in v3:
> - Add space between label and node name.
> - Add spcae with properties and '='.
> - Add SoC specific compatible.
>
> Changes in v2:
> - Rename node from usb3@... to usb@... to meet DTSpec
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 20 ++++++++++++++++++++
> 1 files changed, 20 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 8dd3501..19519df 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -144,6 +144,26 @@
> clocks = <&sysclk>;
> };
>
> + usb0: usb@3100000 {
Please sort the nodes with unit-address in the address. That said, it
should go after watchdog@23c0000.
> + compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <0 80 0x4>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
Shawn
> + dr_mode = "host";
> + snps,dis_rxdet_inp3_quirk;
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> + };
> +
> + usb1: usb@3110000 {
> + compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <0 81 0x4>;
> + dr_mode = "host";
> + snps,dis_rxdet_inp3_quirk;
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> + };
> +
> i2c0: i2c@2000000 {
> compatible = "fsl,vf610-i2c";
> #address-cells = <1>;
> --
> 1.7.1
>