RE: [PATCH V12 2/5] thermal: of-thermal: add API for getting sensor ID from DT

From: Anson Huang
Date: Fri May 17 2019 - 02:39:27 EST




> -----Original Message-----
> From: Daniel Lezcano [mailto:daniel.lezcano@xxxxxxxxxx]
> Sent: Thursday, May 16, 2019 5:39 PM
> To: Anson Huang <anson.huang@xxxxxxx>; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; catalin.marinas@xxxxxxx;
> will.deacon@xxxxxxx; rui.zhang@xxxxxxxxx; edubezval@xxxxxxxxx;
> Aisheng Dong <aisheng.dong@xxxxxxx>; ulf.hansson@xxxxxxxxxx; Daniel
> Baluta <daniel.baluta@xxxxxxx>; Peng Fan <peng.fan@xxxxxxx>;
> heiko@xxxxxxxxx; horms+renesas@xxxxxxxxxxxx; agross@xxxxxxxxxx;
> olof@xxxxxxxxx; bjorn.andersson@xxxxxxxxxx; jagan@xxxxxxxxxxxxxxxxxxxx;
> enric.balletbo@xxxxxxxxxxxxx; marc.w.gonzalez@xxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: Re: [PATCH V12 2/5] thermal: of-thermal: add API for getting sensor
> ID from DT
>
> On 16/04/2019 05:22, Anson Huang wrote:
> > On some platforms like i.MX8QXP, the thermal driver needs a real HW
> > sensor ID from DT thermal zone, the HW sensor ID is used to get
> > temperature from SCU firmware, and the virtual sensor ID starting from
> > 0 to N is NOT used at all, this patch adds new API
> > thermal_zone_of_get_sensor_id() to provide the feature of getting
> > sensor ID from DT thermal zone's node.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
>
> Eduardo?
>
> What do you think about this patch?

I would like to hear Eduardo's opinion about this patch before sending out a new version
for review, thanks.

Anson.

>
> > ---
> > New patch.
> > ---
> > drivers/thermal/of-thermal.c | 53
> ++++++++++++++++++++++++++++++++++----------
> > include/linux/thermal.h | 10 +++++++++
> > 2 files changed, 51 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/thermal/of-thermal.c
> > b/drivers/thermal/of-thermal.c index 2df059c..2e4320c 100644
> > --- a/drivers/thermal/of-thermal.c
> > +++ b/drivers/thermal/of-thermal.c
> > @@ -446,6 +446,46 @@ thermal_zone_of_add_sensor(struct device_node
> > *zone, }
> >
> > /**
> > + * thermal_zone_of_get_sensor_id - get sensor ID from a DT thermal
> > + zone
> > + * @tz_np: a valid thermal zone device node.
> > + * @sensor_specs: pointer to output arguments structure will be passed
> back.
> > + * @id: a sensor ID pointer will be passed back.
> > + *
> > + * This function will get sensor ID from a given thermal zone node,
> > + use
> > + * "thermal-sensors" as list name, and get sensor ID from first
> > + phandle's
> > + * argument.
> > + *
> > + * Return: 0 on success, proper error code otherwise.
> > + */
> > +
> > +int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
> > + struct of_phandle_args *sensor_specs,
> > + u32 *id)
> > +{
> > + int ret;
> > +
> > + ret = of_parse_phandle_with_args(tz_np,
> > + "thermal-sensors",
> > + "#thermal-sensor-cells",
> > + 0,
> > + sensor_specs);
> > + if (ret)
> > + return ret;
> > +
> > + if (sensor_specs->args_count >= 1) {
> > + *id = sensor_specs->args[0];
> > + WARN(sensor_specs->args_count > 1,
> > + "%pOFn: too many cells in sensor specifier %d\n",
> > + sensor_specs->np, sensor_specs->args_count);
> > + } else {
> > + *id = 0;
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(thermal_zone_of_get_sensor_id);
> > +
> > +/**
> > * thermal_zone_of_sensor_register - registers a sensor to a DT thermal
> zone
> > * @dev: a valid struct device pointer of a sensor device. Must contain
> > * a valid .of_node, for the sensor node.
> > @@ -500,21 +540,10 @@ thermal_zone_of_sensor_register(struct device
> *dev, int sensor_id, void *data,
> > int ret, id;
> >
> > /* For now, thermal framework supports only 1 sensor per
> zone */
> > - ret = of_parse_phandle_with_args(child, "thermal-sensors",
> > - "#thermal-sensor-cells",
> > - 0, &sensor_specs);
> > + ret = thermal_zone_of_get_sensor_id(child, &sensor_specs,
> &id);
> > if (ret)
> > continue;
> >
> > - if (sensor_specs.args_count >= 1) {
> > - id = sensor_specs.args[0];
> > - WARN(sensor_specs.args_count > 1,
> > - "%pOFn: too many cells in sensor specifier %d\n",
> > - sensor_specs.np, sensor_specs.args_count);
> > - } else {
> > - id = 0;
> > - }
> > -
> > if (sensor_specs.np == sensor_np && id == sensor_id) {
> > tzd = thermal_zone_of_add_sensor(child, sensor_np,
> > data, ops);
> > diff --git a/include/linux/thermal.h b/include/linux/thermal.h index
> > 5f4705f..970fb37 100644
> > --- a/include/linux/thermal.h
> > +++ b/include/linux/thermal.h
> > @@ -375,6 +375,9 @@ struct thermal_trip {
> >
> > /* Function declarations */
> > #ifdef CONFIG_THERMAL_OF
> > +int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
> > + struct of_phandle_args *sensor_specs,
> > + u32 *id);
> > struct thermal_zone_device *
> > thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
> > const struct thermal_zone_of_device_ops
> *ops); @@ -386,6 +389,13
> > @@ struct thermal_zone_device
> *devm_thermal_zone_of_sensor_register(
> > void devm_thermal_zone_of_sensor_unregister(struct device *dev,
> > struct thermal_zone_device *tz);
> #else
> > +
> > +static int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
> > + struct of_phandle_args
> *sensor_specs,
> > + u32 *id)
> > +{
> > + return -ENOENT;
> > +}
> > static inline struct thermal_zone_device *
> > thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
> > const struct thermal_zone_of_device_ops
> *ops)
> >
>
>
> --
>
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> linaro.org%2F&amp;data=02%7C01%7Canson.huang%40nxp.com%7Ca89b31
> e8690d4fba3e8b08d6d9e25488%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C0%7C636935963439948138&amp;sdata=gAYU5pi1Isj%2BhfREN8n6v03
> Lb%2F9eRzDzC2ocDdfe%2Bkc%3D&amp;reserved=0> Linaro.org â Open
> source software for ARM SoCs
>
> Follow Linaro:
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> facebook.com%2Fpages%2FLinaro&amp;data=02%7C01%7Canson.huang%4
> 0nxp.com%7Ca89b31e8690d4fba3e8b08d6d9e25488%7C686ea1d3bc2b4c6fa
> 92cd99c5c301635%7C0%7C0%7C636935963439948138&amp;sdata=j%2Fo%2
> BFN8mALGBVhVQfKoYhijDw51FhcGjackCaUl%2BY%2FQ%3D&amp;reserved=
> 0> Facebook |
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitte
> r.com%2F%23!%2Flinaroorg&amp;data=02%7C01%7Canson.huang%40nxp.c
> om%7Ca89b31e8690d4fba3e8b08d6d9e25488%7C686ea1d3bc2b4c6fa92cd9
> 9c5c301635%7C0%7C0%7C636935963439948138&amp;sdata=O%2Bry%2Fdk
> UGuO22brYTMaz%2FCvGOUNt15WJF8uALLVgiwk%3D&amp;reserved=0>
> Twitter |
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> linaro.org%2Flinaro-
> blog%2F&amp;data=02%7C01%7Canson.huang%40nxp.com%7Ca89b31e869
> 0d4fba3e8b08d6d9e25488%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7
> C0%7C636935963439948138&amp;sdata=WLHahx%2BryvBprdoNUEvQ4kCnY
> FmUuqgA14xqHjS7WHU%3D&amp;reserved=0> Blog