Re: [PATCH 1/1] arm64: dts: marvell: mcbin: enlarge PCI memory window

From: Heinrich Schuchardt
Date: Fri May 17 2019 - 16:58:35 EST


On 5/17/19 10:08 PM, Gregory CLEMENT wrote:
> Hi Heinrich Schuchardt,
>
>> Running a graphics adapter on the MACCHIATObin fails due to an
>> insufficently sized memory window.
> I think "insufficient" is enough or I miss something.

Thanks for reviewing. Do I have to resend with corrected wording?

>
>>
>> Enlarge the memory window for the PCIe slot to 512 MiB.
>>
>> With the patch I am able to use a GT710 graphics adapter with 1 GB onboard
>> memory.
>>
>> These are the mapped memory areas that the graphics adapter is actually
>> using:
>>
>> Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
>> Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M]
>> Region 3: Memory at c8000000 (64-bit, prefetchable) [size=32M]
>> Region 5: I/O ports at 1000 [size=128]
>> Expansion ROM at ca000000 [disabled] [size=512K]
>
>>From my point of view this patch is correct, I don't think it is a
> problem to map more memory. So I applied on it mvebu/dt64.
>

To which repository are your referring?

Best regards

Heinrich

> But I add also Thomas in CC who know better the PCIe support on mvebu/
>
> Thanks,
>
> Gregory
>
>
>>
>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@xxxxxx>
>> ---
>> arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
>> index 329f8ceeebea..205071b45a32 100644
>> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
>> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
>> @@ -184,6 +184,8 @@
>> num-lanes = <4>;
>> num-viewport = <8>;
>> reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
>> + ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
>> + 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
>> status = "okay";
>> };
>>
>> --
>> 2.20.1
>>
>