Re: [PATCH 4.9 41/51] fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied

From: Nathan Chancellor
Date: Sun May 19 2019 - 13:24:07 EST

Next message: Wolfram Sang: "Re: [PATCH 2/3] mmc: core: API for temporarily disabling auto-retuning due to errors"
Previous message: Thomas Gleixner: "Re: [PATCH RFC] time: validate watchdog clocksource using second best candidate"
Next in thread: Florian Westphal: "Re: [PATCH 4.9 41/51] fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, May 15, 2019 at 12:56:16PM +0200, Greg Kroah-Hartman wrote:
> From: Hangbin Liu <liuhangbin@xxxxxxxxx>
>
> [ Upstream commit e9919a24d3022f72bcadc407e73a6ef17093a849 ]
>
> With commit 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to
> fib_nl_newrule") we now able to check if a rule already exists. But this
> only works with iproute2. For other tools like libnl, NetworkManager,
> it still could add duplicate rules with only NLM_F_CREATE flag, like
>
> [localhost ~ ]# ip rule
> 0: from all lookup local
> 32766: from all lookup main
> 32767: from all lookup default
> 100000: from 192.168.7.5 lookup 5
> 100000: from 192.168.7.5 lookup 5
>
> As it doesn't make sense to create two duplicate rules, let's just return
> 0 if the rule exists.
>
> Fixes: 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule")
> Reported-by: Thomas Haller <thaller@xxxxxxxxxx>
> Signed-off-by: Hangbin Liu <liuhangbin@xxxxxxxxx>
> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> ---
> net/core/fib_rules.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> --- a/net/core/fib_rules.c
> +++ b/net/core/fib_rules.c
> @@ -429,9 +429,9 @@ int fib_nl_newrule(struct sk_buff *skb,
> if (rule->l3mdev && rule->table)
> goto errout_free;
>
> - if ((nlh->nlmsg_flags & NLM_F_EXCL) &&
> - rule_exists(ops, frh, tb, rule)) {
> - err = -EEXIST;
> + if (rule_exists(ops, frh, tb, rule)) {
> + if (nlh->nlmsg_flags & NLM_F_EXCL)
> + err = -EEXIST;
> goto errout_free;
> }
>
>
>

Hi all,

This commit is causing issues on Android devices when Wi-Fi and mobile
data are both enabled. The device will do a soft reboot consistently.
So far, I've had reports on the Pixel 3 XL, OnePlus 6, Pocophone, and
Note 9 and I can reproduce on my OnePlus 6.

Sorry for taking so long to report this, I just figured out how to
reproduce it today and I didn't want to report it without that.

Attached is a full dmesg and the relevant snippet from Android's logcat.

Let me know what I can do to help debug,
Nathan
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.177-gb7bd79d4e8f5 (nathan@archlinux-epyc) (clang version 9.0.0 (git://github.com/llvm/llvm-project 898896836dd17e093ffb9c8293193332d3d68b62)) #1 SMP PREEMPT Sat May 18 12:24:16 MST 2019
[ 0.000000] Boot CPU: AArch64 Processor [517f803c]
[ 0.000000] Machine: Qualcomm Technologies, Inc. SDM845 v2.1 MTP PVT
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fec00000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fdc00000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size 92 MiB
[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000027a400000, size 36 MiB
[ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7800000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node secure_sp_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ef800000, size 128 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000008ab00000, size 20 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_region@0x8ab00000, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008bf00000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node camera_region@0x8bf00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c400000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node ips_fw_region@0x8c400000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c410000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node ipa_gsi_region@0x8c410000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c415000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node gpu_region@0x8c415000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c500000, size 26 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region@0x8c500000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008df00000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node wlan_fw_region@0x8df00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e000000, size 120 MiB
[ 0.000000] OF: reserved mem: initialized node modem_region@0x8e000000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000095800000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node video_region@0x95800000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000095d00000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_region@0x95d00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096500000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node mba_region@0x96500000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096700000, size 20 MiB
[ 0.000000] OF: reserved mem: initialized node slpi_region@0x96700000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000097b00000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node pil_spss_region@0x97b00000, compatible id removed-dma-pool
[ 0.000000] On node 0 totalpages: 2008649
[ 0.000000] free_area_init_node: node 0, pgdat ffffff8009707680, node_mem_map ffffffc1f2214000
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 449961 pages, LIFO batch:31
[ 0.000000] Normal zone: 24355 pages used for memmap
[ 0.000000] Normal zone: 1558688 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 20 pages/cpu s51480 r0 d30440 u81920
[ 0.000000] pcpu-alloc: s51480 r0 d30440 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1976102
[ 0.000000] Kernel command line: quiet rcupdate.rcu_expedited=1 noirqdebug androidboot.hardware=qcom androidboot.console=ttyMSM0 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true androidboot.usbcontroller=a600000.dwc3 firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7 buildvariant=user androidboot.verifiedbootstate=orange androidboot.keymaster=1 dm="1 vroot none ro 1,0 5764704 verity 1 PARTUUID=e7505641-4ac1-cf0a-53c2-f640f90fdd04 PARTUUID=e7505641-4ac1-cf0a-53c2-f640f90fdd04 4096 4096 720588 720588 sha1 8ac817f655b76567ece5024b04dca0ea23256077 1a87bfcea39e15b538433e48836a4032e45a9ff2e1b809a0f129c10704566ae8 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=e7505641-4ac1-cf0a-53c2-f640f90fdd04 fec_roots 2 fec_blocks 726263 fec_start 726263" root=/dev/dm-0 androidboot.vbmeta.device=PARTUUID=c4dc3735-e477-34e9-9acf-62b92d8f6a70 androidb
[ 0.000000] IRQ lockup detection disabled
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 2097152 bytes
[ 0.000000] early log buf free: 255696(97%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] software IO TLB: mapped [mem 0xef400000-0xef800000] (4MB)
[ 0.000000] Memory: 7484332K/8034596K available (15998K kernel code, 1584K rwdata, 4904K rodata, 576K init, 5323K bss, 247160K reserved, 303104K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8009020000 ( 16000 KB)
[ 0.000000] .rodata : 0xffffff8009020000 - 0xffffff80094f0000 ( 4928 KB)
[ 0.000000] .init : 0xffffff80094f0000 - 0xffffff8009580000 ( 576 KB)
[ 0.000000] .data : 0xffffff8009580000 - 0xffffff800970c000 ( 1584 KB)
[ 0.000000] .bss : 0xffffff800970c000 - 0xffffff8009c3ed5c ( 5324 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1fc8a0000 ( 8136 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] \x09RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] \x09RCU kthread priority: 1.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] PDC SDM845 v2 initialized
[ 0.000000] \x09Offload RCU callbacks from all CPUs
[ 0.000000] \x09Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000021] clocksource: Switched to clocksource arch_sys_counter
[ 0.002221] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
[ 0.002237] pid_max: default: 32768 minimum: 301
[ 0.002307] Security Framework initialized
[ 0.002316] SELinux: Initializing.
[ 0.002356] SELinux: Starting in permissive mode
[ 0.002388] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002392] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003405] /cpus/cpu@0: Missing clock-frequency property
[ 0.003417] /cpus/cpu@100: Missing clock-frequency property
[ 0.003424] /cpus/cpu@200: Missing clock-frequency property
[ 0.003430] /cpus/cpu@300: Missing clock-frequency property
[ 0.003439] /cpus/cpu@400: Missing clock-frequency property
[ 0.003446] /cpus/cpu@500: Missing clock-frequency property
[ 0.003453] /cpus/cpu@600: Missing clock-frequency property
[ 0.003461] /cpus/cpu@700: Missing clock-frequency property
[ 0.003522] sched-energy: Sched-energy-costs installed from DT
[ 0.006780] ASID allocator initialised with 65536 entries
[ 0.006828] NOHZ: local_softirq_pending 02
[ 0.030566] CPU1: Booted secondary processor [517f803c]
[ 0.040577] CPU2: Booted secondary processor [517f803c]
[ 0.050642] CPU3: Booted secondary processor [517f803c]
[ 0.061311] CPU4: Booted secondary processor [516f802d]
[ 0.071742] CPU5: Booted secondary processor [516f802d]
[ 0.082299] CPU6: Booted secondary processor [516f802d]
[ 0.093019] CPU7: Booted secondary processor [516f802d]
[ 0.093175] Brought up 8 CPUs
[ 0.093181] SMP: Total of 8 processors activated.
[ 0.093185] CPU features: detected feature: GIC system register CPU interface
[ 0.093187] CPU features: detected feature: Privileged Access Never
[ 0.093189] CPU features: detected feature: User Access Override
[ 0.093192] CPU features: detected feature: 32-bit EL0 Support
[ 0.093299] CPU: All CPU(s) started at EL1
[ 0.093336] alternatives: patching kernel code
[ 0.094987] CPU7: update max cpu_capacity 1024
[ 0.162393] CPU0: update max cpu_capacity 1024
[ 0.163113] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.163125] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.168909] pinctrl core: initialized pinctrl subsystem
[ 0.169512] NET: Registered protocol family 16
[ 0.170529] schedtune: init normalization constants...
[ 0.170536] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 17
[ 0.170541] schedtune: CPU[0] min_pwr: 4 max_pwr: 160
[ 0.170544] schedtune: CPU[1] min_pwr: 4 max_pwr: 160
[ 0.170546] schedtune: CPU[2] min_pwr: 4 max_pwr: 160
[ 0.170549] schedtune: CPU[3] min_pwr: 4 max_pwr: 160
[ 0.170553] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 190
[ 0.170557] schedtune: CPU[4] min_pwr: 40 max_pwr: 60000
[ 0.170560] schedtune: CPU[5] min_pwr: 40 max_pwr: 60000
[ 0.170563] schedtune: CPU[6] min_pwr: 40 max_pwr: 60000
[ 0.170566] schedtune: CPU[7] min_pwr: 40 max_pwr: 60000
[ 0.170571] schedtune: SYSTEM min_pwr: 178 max_pwr: 240847
[ 0.170573] schedtune: using normalization constants mul: 383241808 sh1: 1 sh2: 17
[ 0.170574] schedtune: verify normalization constants...
[ 0.170577] schedtune: max_pwr/2^0: 240669 => norm_pwr: 1024
[ 0.170580] schedtune: max_pwr/2^1: 120334 => norm_pwr: 511
[ 0.170582] schedtune: max_pwr/2^2: 60167 => norm_pwr: 255
[ 0.170584] schedtune: max_pwr/2^3: 30083 => norm_pwr: 127
[ 0.170586] schedtune: max_pwr/2^4: 15041 => norm_pwr: 63
[ 0.170587] schedtune: max_pwr/2^5: 7520 => norm_pwr: 31
[ 0.170589] schedtune: configured to support 6 boost groups
[ 0.171231] cpuidle: using governor menu
[ 0.172392] cpuidle: using governor qcom
[ 0.177311] vdso: 2 pages (1 code @ ffffff8009027000, 1 data @ ffffff8009584000)
[ 0.177316] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.177911] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.177992] msm_smem_init: unable to create logging context
[ 0.178014] <CORE> glink_init: unable to create log context
[ 0.178561] exit: IPA_USB init success!
[ 0.178600] Failed to create IPC log0
[ 0.178606] Failed to create IPC log1
[ 0.178609] Failed to create IPC log2
[ 0.178611] Failed to create IPC log3
[ 0.178613] Failed to create IPC log4
[ 0.188677] pstore: using zlib compression
[ 0.188862] console [pstore0] enabled
[ 0.188933] pstore: Registered ramoops as persistent store backend
[ 0.188937] ramoops: attached 0x400000@0xac300000, ecc: 0/0
[ 0.191558] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
[ 0.191630] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
[ 0.191902] qupv3_geni_se 8c0000.qcom,qupv3_0_geni_se: geni_se_probe Failed to allocate log context
[ 0.192030] irq: no irq domain found for /soc/pinctrl@03400000 !
[ 0.192438] qupv3_geni_se ac0000.qcom,qupv3_1_geni_se: geni_se_probe Failed to allocate log context
[ 0.195523] unable to find DT imem DLOAD mode node
[ 0.197220] unable to find DT imem EDLOAD mode node
[ 0.198089] set_dload_mode ON
[ 0.198513] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[ 0.200298] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0x8e000000
[ 0.200391] platform 17300000.qcom,lpass: assigned reserved memory node adsp_region@0x8c500000
[ 0.200482] platform 5c00000.qcom,ssc: assigned reserved memory node slpi_region@0x96700000
[ 0.201095] platform 8300000.qcom,turing: assigned reserved memory node cdsp_region@0x95d00000
[ 0.201375] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
[ 0.201585] platform aae0000.qcom,venus: assigned reserved memory node video_region@0x95800000
[ 0.205749] <CORE> glink_core_register_transport: unable to create log context for [spss:mailbox]
[ 0.205824] <CORE> glink_mailbox_probe: unable to create log context for [spss:mailbox]
[ 0.210841] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
[ 0.210907] <CORE> glink_smem_native_probe: unable to create log context for [mpss:smem]
[ 0.211312] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
[ 0.211381] <CORE> glink_smem_native_probe: unable to create log context for [lpass:smem]
[ 0.211804] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
[ 0.211853] <CORE> glink_smem_native_probe: unable to create log context for [dsps:smem]
[ 0.212350] <CORE> glink_core_register_transport: unable to create log context for [cdsp:smem]
[ 0.212396] <CORE> glink_smem_native_probe: unable to create log context for [cdsp:smem]
[ 0.213196] sps:sps is ready.
[ 0.213712] (NULL device *): msm_gsi_probe:3147 failed to create IPC log, continue...
[ 0.214048] platform soc:qcom,ipa_fws: assigned reserved memory node ips_fw_region@0x8c400000
[ 0.215205] platform soc:mem_dump: assigned reserved memory node mem_dump_region
[ 0.217930] pm8998_s9_level: supplied by pm8998_s6_level
[ 0.217965] pm8998_s9_level: Bringing 1uV into 17-17uV
[ 0.218084] pm8998_s9_level_ao: supplied by pm8998_s6_level_ao
[ 0.218107] pm8998_s9_level_ao: Bringing 1uV into 17-17uV
[ 0.225344] pm8998_l24: supplied by pm8998_l12
[ 0.226881] pm8998_lvs1: Bringing 1uV into 1800000-1800000uV
[ 0.227220] pm8998_lvs2: Bringing 1uV into 1800000-1800000uV
[ 0.240559] sdm845-v2-pinctrl 3400000.pinctrl: invalid resource
[ 0.246607] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0x8c415000
[ 0.263724] gpu_cx_gdsc: supplied by pm8998_s9_level
[ 0.266339] clk: cam_cc_bps_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac6f000.qcom,bps
[ 0.266542] clk: cam_cc_bps_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac6f000.qcom,bps
[ 0.266683] clk: cam_cc_cci_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac4a000.qcom,cci
[ 0.266829] clk: cam_cc_cci_clk_src: set OPP pair(100000000 Hz: 257 uV) on ac4a000.qcom,cci
[ 0.266994] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac65000.qcom,csiphy
[ 0.267066] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac65000.qcom,csiphy
[ 0.267217] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac66000.qcom,csiphy
[ 0.267301] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac66000.qcom,csiphy
[ 0.267439] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac67000.qcom,csiphy
[ 0.267527] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac67000.qcom,csiphy
[ 0.267688] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac68000.qcom,csiphy
[ 0.267771] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac68000.qcom,csiphy
[ 0.268259] clk: cam_cc_icp_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac00000.qcom,a5
[ 0.268423] clk: cam_cc_icp_clk_src: set OPP pair(600000000 Hz: 193 uV) on ac00000.qcom,a5
[ 0.268724] clk: cam_cc_ife_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on acaf000.qcom,vfe0
[ 0.268941] clk: cam_cc_ife_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on acaf000.qcom,vfe0
[ 0.269178] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb3000.qcom,csid0
[ 0.269307] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acb3000.qcom,csid0
[ 0.269619] clk: cam_cc_ife_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb6000.qcom,vfe1
[ 0.269842] clk: cam_cc_ife_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on acb6000.qcom,vfe1
[ 0.270121] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acba000.qcom,csid1
[ 0.270252] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acba000.qcom,csid1
[ 0.270548] clk: cam_cc_ife_lite_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc4000.qcom,vfe-lite
[ 0.270774] clk: cam_cc_ife_lite_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc4000.qcom,vfe-lite
[ 0.271069] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc8000.qcom,csid-lite
[ 0.271218] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acc8000.qcom,csid-lite
[ 0.271685] clk: cam_cc_ipe_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac87000.qcom,ipe0
[ 0.272001] clk: cam_cc_ipe_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac87000.qcom,ipe0
[ 0.272525] clk: cam_cc_ipe_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac91000.qcom,ipe1
[ 0.272804] clk: cam_cc_ipe_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac91000.qcom,ipe1
[ 0.275868] cam_cc-sdm845 ad00000.qcom,camcc: Registered Camera CC clocks
[ 0.276989] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
[ 0.277924] clk-rpmh soc:qcom,rpmhclk: Registered RPMh clocks
[ 0.279824] disp_cc-sdm845 af00000.qcom,dispcc: Registered Display CC clocks
[ 0.303522] gcc-sdm845 100000.qcom,gcc: Registered GCC clocks
[ 0.304386] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(180000000 Hz: 49 uV) on 5000000.qcom,kgsl-3d0
[ 0.304658] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(710000000 Hz: 417 uV) on 5000000.qcom,kgsl-3d0
[ 0.304725] gfxcc-sdm845 5090000.qcom,gfxcc: Registered GFX CC clocks
[ 0.306239] clk: gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 506a000.qcom,gmu
[ 0.306340] clk: gpu_cc_gmu_clk_src: set OPP pair(500000000 Hz: 129 uV) on 506a000.qcom,gmu
[ 0.306533] gpu_cc-sdm845 5090000.qcom,gpucc: Registered GPU CC clocks
[ 0.307728] video_cc-sdm845 ab00000.qcom,videocc: Registered Video CC clocks
[ 0.308049] socinfo_print: v0.15, id=321, ver=2.1, raw_id=139, raw_ver=2, hw_plat=8, hw_plat_ver=65536\x0a accessory_chip=0, hw_plat_subtype=0, pmic_model=65556, pmic_die_revision=131072 foundry_id=3 serial_number=3423966390 num_pmics=3 chip_family=0x4f raw_device_family=0x6 raw_device_number=0x0 nproduct_id=0x3f4 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0x6 ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
[ 0.308052] msm_bus_fabric_rpmh_init_driver
[ 0.308254] msm_bus: Probe started
[ 0.308864] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.308915] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.308928] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.308978] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.311322] msm_bus: DT Parsing complete
[ 0.314282] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.314433] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.314472] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.314629] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.325444] actuator_regulator: supplied by pmi8998_bob
[ 0.325787] actuator_regulator: supplied by pmi8998_bob
[ 0.325878] actuator_regulator: Failed to create debugfs directory
[ 0.325898] actuator_regulator: Failed to create debugfs directory
[ 0.325917] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
[ 0.326776] arm-smmu 5040000.arm,smmu-kgsl: \x09(IDR0.CTTW overridden by dma-coherent property)
[ 0.326895] arm-smmu 5040000.arm,smmu-kgsl: \x09stream matching with 5 register groups, mask 0x7
[ 0.327058] arm-smmu 5040000.arm,smmu-kgsl: found 8 context interrupt(s) but have 5 context banks. assuming 5 context interrupts.
[ 0.329616] register_client_adhoc:find path.src 139 dest 627
[ 0.329804] register_client_adhoc:Client handle 1 apps_smmu
[ 0.329974] arm-smmu 15000000.apps-smmu: \x09(IDR0.CTTW overridden by dma-coherent property)
[ 0.330098] arm-smmu 15000000.apps-smmu: \x09stream matching with 76 register groups, mask 0x7fff
[ 0.330840] arm-smmu 15000000.apps-smmu: found 64 context interrupt(s) but have 45 context banks. assuming 45 context interrupts.
[ 0.331340] register_client_adhoc:find path.src 139 dest 627
[ 0.331478] register_client_adhoc:Client handle 2 apps_smmu
[ 0.331677] register_client_adhoc:find path.src 139 dest 627
[ 0.331810] register_client_adhoc:Client handle 3 apps_smmu
[ 0.332000] register_client_adhoc:find path.src 22 dest 773
[ 0.332075] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
[ 0.332263] register_client_adhoc:find path.src 22 dest 773
[ 0.332332] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu
[ 0.332517] register_client_adhoc:find path.src 137 dest 772
[ 0.332590] register_client_adhoc:Client handle 6 mnoc_sf_0_tbu
[ 0.332730] register_client_adhoc:find path.src 139 dest 627
[ 0.332868] register_client_adhoc:Client handle 7 apps_smmu
[ 0.333059] register_client_adhoc:find path.src 139 dest 627
[ 0.333192] register_client_adhoc:Client handle 8 apps_smmu
[ 0.333418] register_client_adhoc:find path.src 139 dest 627
[ 0.333550] register_client_adhoc:Client handle 9 apps_smmu
[ 0.334232] iommu: Adding device ae00000.qcom,mdss_mdp to group 0
[ 0.334372] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 1
[ 0.334508] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 2
[ 0.334665] iommu: Adding device 1de0000.qcedev to group 3
[ 0.334796] iommu: Adding device 1de0000.qcrypto to group 4
[ 0.334931] iommu: Adding device 18800000.qcom,icnss to group 5
[ 0.335062] iommu: Adding device 800000.qcom,gpi-dma to group 6
[ 0.335195] iommu: Adding device a00000.qcom,gpi-dma to group 7
[ 0.335325] iommu: Adding device 88a7000.msm_tspp to group 8
[ 0.335458] iommu: Adding device soc:apps_iommu_test_device to group 8
[ 0.335582] iommu: Adding device soc:apps_iommu_coherent_test_device to group 8
[ 0.335727] iommu: Adding device soc:qcom,msm-audio-ion to group 9
[ 0.335863] iommu: Adding device a600000.ssusb to group 10
[ 0.335996] iommu: Adding device soc:usb_audio_qmi_dev to group 11
[ 0.337618] SCSI subsystem initialized
[ 0.337711] usbcore: registered new interface driver usbfs
[ 0.337734] usbcore: registered new interface driver hub
[ 0.337853] usbcore: registered new device driver usb
[ 0.338347] soc:usb_nop_phy supply vcc not found, using dummy regulator
[ 0.338676] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c0:0x21)
[ 0.338690] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c1:0x0)
[ 0.338704] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c2:0x2)
[ 0.338718] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c3:0x0)
[ 0.338733] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c4:0x40)
[ 0.338746] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c5:0x2)
[ 0.338760] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c6:0x0)
[ 0.338774] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c7:0x80)
[ 0.338788] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c8:0x40)
[ 0.338802] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c9:0x0)
[ 0.338816] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8ca:0x0)
[ 0.338830] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8cb:0x0)
[ 0.338844] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8cc:0x0)
[ 0.338858] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8cd:0x0)
[ 0.338872] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8ce:0x0)
[ 0.338886] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8cf:0x0)
[ 0.338938] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 PON_REASON1 regs :[0x21] and Power-on reason: Triggered from Hard Reset and 'warm' boot
[ 0.338942] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 PON_REASON1 regs :[0x21] and Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
[ 0.338970] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: POFF_REASON regs :[0x2] and Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[ 0.339152] input: qpnp_pon as /devices/virtual/input/input0
[ 0.340006] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
[ 0.340056] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c0:0x20)
[ 0.340072] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c1:0x0)
[ 0.340086] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c2:0x8)
[ 0.340101] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c3:0x0)
[ 0.340115] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c4:0x40)
[ 0.340129] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c5:0x8)
[ 0.340144] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c6:0x0)
[ 0.340157] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c7:0x80)
[ 0.340171] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c8:0x0)
[ 0.340186] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c9:0x0)
[ 0.340200] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8ca:0x0)
[ 0.340214] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8cb:0x0)
[ 0.340228] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8cc:0x0)
[ 0.340242] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8cd:0x0)
[ 0.340256] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8ce:0x0)
[ 0.340271] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8cf:0x0)
[ 0.340322] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 PON_REASON1 regs :[0x20] and Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
[ 0.340348] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: POFF_REASON regs :[0x8] and Power-off reason: Triggered from GP1 (Keypad_Reset1)
[ 0.340703] media: Linux media interface: v0.10
[ 0.340726] Linux video capture interface: v2.00
[ 0.354136] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
[ 0.354371] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0x8ab00000
[ 0.354460] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
[ 0.354532] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node secure_sp_region
[ 0.354604] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
[ 0.354878] ION heap system created
[ 0.355002] ION heap adsp created at 0x00000000fec00000 with size 1000000
[ 0.355012] ION heap qsecom created at 0x000000008ab00000 with size 1400000
[ 0.355019] ION heap qsecom_ta created at 0x00000000fdc00000 with size 1000000
[ 0.355027] ION heap spss created at 0x00000000f7800000 with size 800000
[ 0.355035] ION heap secure_display created at 0x00000000f8000000 with size 5c00000
[ 0.355042] ION heap secure_heap created
[ 0.355628] ipa ipa3_tz_unlock_reg:4965 Bad parameters
[ 0.355639] ipa ipa3_pre_init:5165 Failed to unlock memory region using TZ
[ 0.355726] register_client_adhoc:find path.src 90 dest 512
[ 0.356167] register_client_adhoc:find path.src 90 dest 585
[ 0.356301] register_client_adhoc:find path.src 1 dest 676
[ 0.356542] register_client_adhoc:find path.src 143 dest 777
[ 0.356612] register_client_adhoc:Client handle 10 ipa
[ 0.357039] ipa ipa3_uc_state_check:284 uC interface not initialized
[ 0.357622] ipa ipa3_uc_state_check:284 uC interface not initialized
[ 0.358126] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 12
[ 0.358351] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 13
[ 0.358560] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 14
[ 0.359321] PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
[ 0.359452] PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
[ 0.359564] PMIC@SID2: PMI8998 v2.1 options: 0, 0, 0, 0
[ 0.360808] Advanced Linux Sound Architecture Driver Initialized.
[ 0.361497] Bluetooth: Core ver 2.22
[ 0.361517] NET: Registered protocol family 31
[ 0.361518] Bluetooth: HCI device and connection manager initialized
[ 0.361526] Bluetooth: HCI socket layer initialized
[ 0.361532] Bluetooth: L2CAP socket layer initialized
[ 0.361553] Bluetooth: SCO socket layer initialized
[ 0.361895] NetLabel: Initializing
[ 0.361897] NetLabel: domain hash size = 128
[ 0.361898] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.361939] NetLabel: unlabeled traffic allowed by default
[ 0.361991] pcie:pcie_init.
[ 0.362000] pcie_init: unable to create IPC log context for pcie0-short
[ 0.362004] pcie_init: unable to create IPC log context for pcie0-long
[ 0.362009] pcie_init: unable to create IPC log context for pcie0-dump
[ 0.362014] pcie_init: unable to create IPC log context for pcie1-short
[ 0.362018] pcie_init: unable to create IPC log context for pcie1-long
[ 0.362023] pcie_init: unable to create IPC log context for pcie1-dump
[ 0.362028] pcie_init: unable to create IPC log context for pcie2-short
[ 0.362033] pcie_init: unable to create IPC log context for pcie2-long
[ 0.362037] pcie_init: unable to create IPC log context for pcie2-dump
[ 0.362944] gpu_gx_gdsc: supplied by pm8005_s1_level
[ 0.363288] actuator_regulator: Failed to create debugfs directory
[ 0.364718] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on cpu0
[ 0.365376] clk: add_opp: Set OPP pair (1766400000 Hz, 804000 uv) on cpu0
[ 0.365425] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on cpu1
[ 0.366084] clk: add_opp: Set OPP pair (1766400000 Hz, 804000 uv) on cpu1
[ 0.366133] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on cpu2
[ 0.366828] clk: add_opp: Set OPP pair (1766400000 Hz, 804000 uv) on cpu2
[ 0.366895] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on cpu3
[ 0.367574] clk: add_opp: Set OPP pair (1766400000 Hz, 804000 uv) on cpu3
[ 0.367621] clk: add_opp: Set OPP pair (825600000 Hz, 600000 uv) on cpu4
[ 0.368613] clk: add_opp: Set OPP pair (2803200000 Hz, 1032000 uv) on cpu4
[ 0.368658] clk: add_opp: Set OPP pair (825600000 Hz, 600000 uv) on cpu5
[ 0.369660] clk: add_opp: Set OPP pair (2803200000 Hz, 1032000 uv) on cpu5
[ 0.369708] clk: add_opp: Set OPP pair (825600000 Hz, 600000 uv) on cpu6
[ 0.370767] clk: add_opp: Set OPP pair (2803200000 Hz, 1032000 uv) on cpu6
[ 0.370814] clk: add_opp: Set OPP pair (825600000 Hz, 600000 uv) on cpu7
[ 0.371872] clk: add_opp: Set OPP pair (2803200000 Hz, 1032000 uv) on cpu7
[ 0.372285] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on soc:qcom,l3-cpu0
[ 0.372288] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on soc:qcom,l3-cpu4
[ 0.372290] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on soc:qcom,l3-cdsp
[ 0.372293] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on 5000000.qcom,kgsl-3d0
[ 0.374388] clk: add_opp: Set OPP pair (1478400000 Hz, 816000 uv) on soc:qcom,l3-cpu0
[ 0.374390] clk: add_opp: Set OPP pair (1478400000 Hz, 816000 uv) on soc:qcom,l3-cpu4
[ 0.374392] clk: add_opp: Set OPP pair (1478400000 Hz, 816000 uv) on soc:qcom,l3-cdsp
[ 0.374394] clk: add_opp: Set OPP pair (1478400000 Hz, 816000 uv) on 5000000.qcom,kgsl-3d0
[ 0.375465] cpufreq: driver osm-cpufreq up and running
[ 0.375467] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
[ 0.375523] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
[ 0.375709] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
[ 0.375713] CPU0: update cpu_capacity 381
[ 0.375720] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
[ 0.375722] CPU1: update cpu_capacity 381
[ 0.375728] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
[ 0.375730] CPU2: update cpu_capacity 381
[ 0.375737] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
[ 0.375739] CPU3: update cpu_capacity 381
[ 0.375746] sched-energy energy-costs: cpu=4 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
[ 0.375747] CPU4: update cpu_capacity 1024
[ 0.375754] sched-energy energy-costs: cpu=5 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
[ 0.375755] CPU5: update cpu_capacity 1024
[ 0.375762] sched-energy energy-costs: cpu=6 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
[ 0.375763] CPU6: update cpu_capacity 1024
[ 0.375771] sched-energy energy-costs: cpu=7 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
[ 0.375773] CPU7: update cpu_capacity 1024
[ 0.376864] sched-energy energy-costs: Sched-energy-costs capacity updated
[ 0.376895] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
[ 0.377150] clocksource: Switched to clocksource arch_sys_counter
[ 0.377216] VFS: Disk quotas dquot_6.6.0
[ 0.377245] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.377697] debugcc-sdm845 soc:qcom,cc-debug@100000: Registered debug mux successfully
[ 0.378222] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.378224] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[ 0.378268] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378271] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378275] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378278] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378281] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378689] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks successfully
[ 0.378705] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[ 0.378706] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[ 0.378733] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378736] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378739] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378742] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.378744] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.380060] CPU1: update max cpu_capacity 381
[ 0.383375] CPU5: update max cpu_capacity 1024
[ 0.383821] dsi_pll_10nm_lock_status: DSI PLL(1) lock failed, status=0x00000000
[ 0.389024] dsi_pll_10nm_lock_status: DSI PLL(1) lock failed, status=0x00000000
[ 0.389130] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=1, clocks successfully
[ 0.389143] mdss_pll_probe: MDSS pll label = MDSS DP PLL
[ 0.392311] NET: Registered protocol family 2
[ 0.392629] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.392737] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.393004] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.393034] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.393082] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.393216] NET: Registered protocol family 1
[ 0.393233] PCI: CLS 0 bytes, default 128
[ 0.393267] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
[ 0.393509] Unpacking initramfs...
[ 0.600396] Freeing initrd memory: 15616K
[ 0.600493] execprog: copying static data
[ 0.600550] execprog: finished copying
[ 0.600882] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.605518] workingset: timestamp_bits=61 max_order=21 bucket_order=0
[ 0.606819] Registering sdcardfs 0.1
[ 0.606882] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.606917] fuse init (API version 7.26)
[ 0.607068] exFAT: Version 1.2.9
[ 0.607088] SELinux: Registering netfilter hooks
[ 0.607225] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
[ 0.607226] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
[ 0.607228] pfk [pfk_init]: Driver initialized successfully
[ 0.612236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.612240] io scheduler noop registered
[ 0.612241] io scheduler deadline registered
[ 0.612278] io scheduler cfq registered (default)
[ 0.619848] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5b00: Registered qpnp_clkdiv_1 successfully
[ 0.619905] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5c00: Registered qpnp_clkdiv_2 successfully
[ 0.619961] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5d00: Registered qpnp_clkdiv_3 successfully
[ 0.622482] glink_loopback_server_init: unable to create log context
[ 0.622818] <CORE> glink_core_register_transport: unable to create log context for [wdsp:spi]
[ 0.623209] msm_smp2p_init: unable to create log context
[ 0.624450] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
[ 0.624454] logging for Indications: Unable to create QMI IPC qmi_log_init
[ 0.624913] icnss: Unable to create log context
[ 0.624916] icnss: Unable to create log long context
[ 0.625786] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
[ 0.625836] icnss: Platform driver probed successfully
[ 0.626423] register_client_adhoc:find path.src 125 dest 512
[ 0.626629] register_client_adhoc:Client handle 11 scm_pas
[ 0.626641] minidump-id not found for adsp
[ 0.626763] minidump-id not found for slpi
[ 0.626816] minidump-id not found for cdsp
[ 0.627073] register_client_adhoc:find path.src 63 dest 512
[ 0.627190] register_client_adhoc:Client handle 12 pil-venus
[ 0.627196] minidump-id not found for venus
[ 0.627207] subsys-pil-tz aae0000.qcom,venus: for venus segments only will be dumped.
[ 0.627316] minidump-id not found for ipa_fws
[ 0.627321] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
[ 0.627422] minidump-id not found for a630_zap
[ 0.627427] subsys-pil-tz soc:qcom,kgsl-hyp: for a630_zap segments only will be dumped.
[ 0.627754] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
[ 0.628463] qiib_driver_data_init: unable to create logging context
[ 0.630393] msm_geni_serial 898000.qcom,qup_uart: Wakeup byte 0xfd
[ 0.630417] msm_geni_serial 898000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
[ 0.630429] 898000.qcom,qup_uart: ttyHS0 at MMIO 0x898000 (irq = 8, base_baud = 0) is a MSM
[ 0.630792] msm_geni_serial_init: Driver initialized
[ 0.630903] register_client_adhoc:find path.src 1 dest 618
[ 0.631020] register_client_adhoc:Client handle 13 msm-rng-noc
[ 0.632750] random: crng init done
[ 0.635104] loop: module loaded
[ 0.635513] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
[ 0.635529] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[ 0.635533] QSEECOM: qseecom_probe: no-clock-support=0x1
[ 0.635535] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
[ 0.635554] register_client_adhoc:find path.src 125 dest 512
[ 0.635719] register_client_adhoc:Client handle 14 qseecom-noc
[ 0.635774] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[ 0.635953] Loading pn544 driver
[ 0.636054] register_client_adhoc:find path.src 125 dest 512
[ 0.636196] register_client_adhoc:Client handle 15 qcedev-noc
[ 0.637686] qce 1de0000.qcedev: QTI Crypto 5.4.1 device found @0x1de0000
[ 0.637691] qce 1de0000.qcedev: CE device = 0x0 IO base, CE = ffffff800a8a0000 Consumer (IN) PIPE 6,\x0aProducer (OUT) PIPE 7 IO base BAM = 0000000000000000\x0aBAM IRQ 104 Engines Availability = 0x2011073
[ 0.637721] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000001dc4000
[ 0.637730] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000001dc4000
[ 0.637736] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000001dc4000
[ 0.637742] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000001dc4000
[ 0.637746] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000001dc4000
[ 0.637754] sps:BAM 0x0000000001dc4000 is registered.
[ 0.637954] sps:BAM 0x0000000001dc4000 (va:0xffffff800bdc0000) enabled: ver:0x27, number of pipes:16
[ 0.638300] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 104
[ 0.638743] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 15
[ 0.639269] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
[ 0.639271] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
[ 0.639274] qcedev_setup_context_bank size:0x40000000, dev:ffffffc1ec013c10, mapping:ffffffc1ec0eab00
[ 0.639347] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 16
[ 0.641300] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
[ 0.641305] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0x60200000
[ 0.641307] qcedev_setup_context_bank size:0x40000000, dev:ffffffc1ec014010, mapping:ffffffc1ec100400
[ 0.642009] register_client_adhoc:find path.src 125 dest 512
[ 0.642209] register_client_adhoc:Client handle 16 qcrypto-noc
[ 0.643565] qcrypto 1de0000.qcrypto: QTI Crypto 5.4.1 device found @0x1de0000
[ 0.643570] qcrypto 1de0000.qcrypto: CE device = 0x0 IO base, CE = ffffff800bea0000 Consumer (IN) PIPE 4,\x0aProducer (OUT) PIPE 5 IO base BAM = 0000000000000000\x0aBAM IRQ 104 Engines Availability = 0x2011073
[ 0.644041] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 104
[ 0.644419] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
[ 0.644551] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
[ 0.644668] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
[ 0.644778] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
[ 0.644883] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
[ 0.644990] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
[ 0.645102] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
[ 0.645211] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
[ 0.645334] qcrypto 1de0000.qcrypto: qcrypto-sha1
[ 0.645444] qcrypto 1de0000.qcrypto: qcrypto-sha256
[ 0.645552] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[ 0.645662] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[ 0.645770] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[ 0.645876] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[ 0.645987] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[ 0.646095] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[ 0.646206] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
[ 0.646315] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
[ 0.646420] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
[ 0.646526] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
[ 0.647669] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 0.650942] qcom_ice_get_pdevice: found ice device ffffffc1ec733a00
[ 0.650944] qcom_ice_get_pdevice: matching platform device ffffffc1efebb000
[ 0.651122] register_client_adhoc:find path.src 123 dest 512
[ 0.651336] register_client_adhoc:find path.src 1 dest 757
[ 0.651470] register_client_adhoc:Client handle 17 ufshc_mem
[ 0.652155] scsi host0: ufshcd
[ 0.656834] qcom_ice 1d90000.ufsice: QC ICE 3.1.75 device found @0xffffff800a8c8000
[ 0.663905] SCSI Media Changer driver v0.25
[ 0.663946] [drm] Initialized
[ 0.664075] register_client_adhoc:find path.src 20003 dest 20515
[ 0.664144] register_client_adhoc:find path.src 20004 dest 20515
[ 0.664190] register_client_adhoc:Client handle 18 disp_rsc_mnoc
[ 0.664208] register_client_adhoc:find path.src 20001 dest 20513
[ 0.664262] register_client_adhoc:Client handle 19 disp_rsc_llcc
[ 0.664280] register_client_adhoc:find path.src 20000 dest 20512
[ 0.664331] register_client_adhoc:Client handle 20 disp_rsc_ebi
[ 0.664505] [sde_rsc_hw:rsc_hw_init:679]: sde rsc init successfully done
[ 0.664524] [sde_rsc:sde_rsc_probe:1416]: sde rsc index:0 probed successfully
[ 0.664887] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
[ 0.665019] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-1
[ 0.665505] AXI: get_pdata(): Error: Client name not found
[ 0.665511] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 0.665518] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
[ 0.667249] msm-dsi-panel:[dsi_panel_parse_reset_sequence:1869] RESET SEQ LENGTH = 24
[ 0.667268] msm-dsi-panel:[dsi_panel_parse_misc_features:1916] dsi_panel_parse_misc_features: ulps feature enabled
[ 0.667271] msm-dsi-panel:[dsi_panel_parse_misc_features:1922] dsi_panel_parse_misc_features: ulps during suspend feature disabled
[ 0.667340] msm-dsi-panel:[dsi_panel_parse_esd_config:3118] ESD enabled with mode: register_read
[ 0.668155] msm-dsi-display:[dsi_display_get_boot_display] index = 0
[ 0.668159] msm-dsi-display:[dsi_display_get_boot_display] index = 1
[ 0.668740] register_client_adhoc:find path.src 1 dest 590
[ 0.668908] register_client_adhoc:Client handle 21 mdss_reg
[ 0.668934] register_client_adhoc:find path.src 22 dest 512
[ 0.669065] register_client_adhoc:find path.src 23 dest 512
[ 0.669196] register_client_adhoc:Client handle 22 mdss_sde
[ 0.669279] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops 0xffffff80090a4e08)
[ 0.669285] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops 0xffffff80090a91a8)
[ 0.669554] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_samsung_sofef00_m_cmd_display'
[ 0.669840] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display@18 (ops 0xffffff80090a5c50)
[ 0.669878] [drm] mapped mdp address space @ffffff800e700000
[ 0.669892] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
[ 0.669964] [drm:_sde_kms_get_splash_data:3194] found continuous splash base address:9d400000 size:2400000
[ 0.671424] [drm:sde_kms_hw_init:3323] sde hardware revision:0x40000001
[ 0.672258] [drm] Created domain mdp_ns [80000000,80000000] secure=0
[ 0.676077] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 17
[ 0.676400] [drm] probing device qcom,smmu_sde_sec
[ 0.676408] [drm] Created domain mdp_s [80000000,80000000] secure=1
[ 0.680473] [drm] invalid feature map 9 for feature 10
[ 0.680593] [drm] invalid feature map 9 for feature 10
[ 0.680708] [drm] invalid feature map 9 for feature 10
[ 0.680729] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 0.680834] [drm] invalid feature map 9 for feature 10
[ 0.769647] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[ 0.770623] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.771638] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.772460] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.773319] scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.774071] scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.774670] scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.775287] scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.775904] scsi 0:0:0:4: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.776524] scsi 0:0:0:5: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
[ 0.783815] sdc: sdc1 sdc2
[ 0.783995] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17
[ 0.784933] sdb: sdb1 sdb2
[ 0.785117] sdd: sdd1 sdd2 sdd3
[ 0.787342] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67 sde68 sde69 sde70 sde71 sde72
[ 0.792469] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
[ 0.805936] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.805939] [drm] No driver support for vblank timestamp query.
[ 0.807335] msm-dsi-panel:[dsi_panel_parse_topology:2662] default topology: lm: 1 comp_enc:0 intf: 1
[ 0.807702] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:2750] partial update disabled as the property is not set
[ 0.807871] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 661 registered
[ 0.812277] iommu: Adding device 506a000.qcom,gmu:gmu_user to group 18
[ 0.812544] iommu: Adding device 506a000.qcom,gmu:gmu_kernel to group 19
[ 0.814092] register_client_adhoc:find path.src 26 dest 512
[ 0.814352] register_client_adhoc:Client handle 23 grp3d
[ 0.814373] register_client_adhoc:find path.src 26 dest 10036
[ 0.814527] register_client_adhoc:Client handle 24 cnoc
[ 0.814534] query_client_usecase_all: query_start
[ 0.814593] query_client_usecase_all: query_start
[ 0.815636] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 20
[ 0.815896] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 21
[ 0.849521] libphy: Fixed MDIO Bus: probed
[ 0.849523] tun: Universal TUN/TAP device driver, 1.6
[ 0.849524] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.849563] PPP generic driver version 2.4.2
[ 0.849633] PPP BSD Compression module registered
[ 0.849635] PPP Deflate Compression module registered
[ 0.849712] PPP MPPE Compression module registered
[ 0.849716] NET: Registered protocol family 24
[ 0.849820] CLD80211: Initializing
[ 0.849894] usbcore: registered new interface driver r8152
[ 0.849901] usbcore: registered new interface driver asix
[ 0.849908] usbcore: registered new interface driver ax88179_178a
[ 0.849921] usbcore: registered new interface driver cdc_ether
[ 0.849925] usbcore: registered new interface driver net1080
[ 0.849930] usbcore: registered new interface driver cdc_subset
[ 0.849936] usbcore: registered new interface driver zaurus
[ 0.849944] usbcore: registered new interface driver cdc_ncm
[ 0.850325] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[ 0.855078] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 0.856806] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_probe:qusb-phy-ophost-init-seq got!
[ 0.856935] msm-qusb-phy-v2 88e2000.qusb: usb_oe_exist=0
[ 0.857237] actuator_regulator: Failed to create debugfs directory
[ 0.858688] msm-dwc3 a600000.ssusb: unable to get dbm device
[ 0.859774] usbcore: registered new interface driver usb-storage
[ 0.860924] fgsi_init: Err allocating ipc_log_ctxt
[ 0.861837] qpnp-pdphy c440000.qcom,spmi:qcom,pmi8998@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
[ 0.862269] mousedev: PS/2 mouse device common for all mice
[ 0.862353] usbcore: registered new interface driver xpad
[ 0.862355] synaptics,s3320: tpd_driver_init enter
[ 0.862702] fingerprint_detect_probe
[ 0.862843] fingerprint_detect soc:fingerprint_detect: fp-gpio-id0 - gpio: 91
[ 0.862847] fingerprint_detect soc:fingerprint_detect: fingerprint_detect_probe: gpio_is_valid(fp_detect->id0_gpio=91)
[ 0.862858] fingerprint_detect soc:fingerprint_detect: fp-gpio-id1 - gpio: 92
[ 0.862860] fingerprint_detect soc:fingerprint_detect: fingerprint_detect_probe: gpio_is_valid(fp_detect->id1_gpio=92)
[ 0.862872] fingerprint_detect soc:fingerprint_detect: fp-gpio-id2 - gpio: 95
[ 0.862873] fingerprint_detect soc:fingerprint_detect: fingerprint_detect_probe: gpio_is_valid(fp_detect->id2_gpio=95)
[ 0.872962] fingerprint_detect_probe: 011
[ 0.883054] fingerprint_detect_probe: 011
[ 0.893121] fingerprint_detect_probe: 011
[ 0.893125] fingerprint_detect soc:fingerprint_detect: fingerprint_detect_probe: ok
[ 0.893147] gf_spi: gf_init:fp version 3
[ 0.893155] CHRDEV "goodix_fp_spi" major number 233 goes below the dynamic allocation range
[ 0.893492] soc:goodix_fp supply vdd-3v2 not found, using dummy regulator
[ 0.893523] gf_parse_dts: Failed to get regulator vdd voltage
[ 0.893532] gf_parse_dts:00Failed to set regulator voltage vdd
[ 0.893537] gf_parse_dts: Failed to get regulator vdd current
[ 0.894011] input: gf_input as /devices/virtual/input/input1
[ 0.894043] gf_spi: version V1.2.08
[ 0.894106] gf_spi: status = 0x0
[ 0.894109] [+silead_fp-] SILEAD_FP Driver, Version: v0.2.3.
[ 0.894110] silfp_dev_init:fp version 3
[ 0.894552] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: rtc core: registered qpnp_rtc as rtc0
[ 0.894770] i2c /dev entries driver
[ 0.894953] i2c_geni 88c000.i2c: No reset config specified
[ 0.894959] i2c_geni 88c000.i2c: Bus frequency not specified, default to 400KHz.
[ 0.895000] i2c_geni 88c000.i2c: Geni-I2C speed=400000
[ 0.895713] pn544_parse_dt: 63, 12, 62, 116 error:0
[ 0.895944] pn544_probe : requesting IRQ 315
[ 0.896285] i2c_geni 890000.i2c: No reset config specified
[ 0.896292] i2c_geni 890000.i2c: Bus frequency not specified, default to 400KHz.
[ 0.896328] i2c_geni 890000.i2c: Geni-I2C speed=400000
[ 0.896936] i2c_geni a88000.i2c: reset config specified
[ 0.896975] i2c_geni a88000.i2c: Geni-I2C speed=100000
[ 0.897632] i2c_geni a88000.i2c: i2c error :-107
[ 0.897839] i2c_geni a88000.i2c: i2c error :-107
[ 0.898043] i2c_geni a88000.i2c: i2c error :-107
[ 0.898247] i2c_geni a88000.i2c: i2c error :-107
[ 0.898253] I2C PMIC: i2c_pmic_read: i2c_pmic_read failed for 3 retries, rc = -107
[ 0.898259] I2C PMIC: i2c_pmic_determine_initial_status: Couldn't read irq data rc=-107
[ 0.898265] I2C PMIC: i2c_pmic_probe: Couldn't determine initial status rc=-107
[ 0.898314] i2c_pmic: probe of 0-0008 failed with error -107
[ 0.898578] i2c_geni a88000.i2c: i2c error :-107
[ 0.898781] i2c_geni a88000.i2c: i2c error :-107
[ 0.898982] i2c_geni a88000.i2c: i2c error :-107
[ 0.899185] i2c_geni a88000.i2c: i2c error :-107
[ 0.899189] I2C PMIC: i2c_pmic_read: i2c_pmic_read failed for 3 retries, rc = -107
[ 0.899194] I2C PMIC: i2c_pmic_determine_initial_status: Couldn't read irq data rc=-107
[ 0.899198] I2C PMIC: i2c_pmic_probe: Couldn't determine initial status rc=-107
[ 0.899216] i2c_pmic: probe of 0-000c failed with error -107
[ 0.899438] i2c_geni a90000.i2c: No reset config specified
[ 0.899443] i2c_geni a90000.i2c: Bus frequency not specified, default to 400KHz.
[ 0.899476] i2c_geni a90000.i2c: Geni-I2C speed=400000
[ 0.900067] synaptics,s3320: before on cpu [4]
[ 0.900073] synaptics,s3320: check CPU[0] is [online]
[ 0.902197] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 22
[ 0.902653] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 23
[ 0.903965] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 24
[ 0.904976] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 25
[ 0.906723] register_client_adhoc:find path.src 1 dest 590
[ 0.906945] register_client_adhoc:Client handle 25 sde_reg
[ 0.907015] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 26
[ 0.907119] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 27
[ 0.907256] register_client_adhoc:find path.src 25 dest 512
[ 0.907407] register_client_adhoc:Client handle 26 mdss_rotator
[ 0.907417] register_client_adhoc:find path.src 1 dest 590
[ 0.907536] register_client_adhoc:Client handle 27 mdss_rot_reg
[ 0.907935] No change in context(0==0), skip
[ 0.909464] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:0, panic:1, dump:2
[ 0.910692] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
[ 0.911865] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
[ 0.912854] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
[ 0.914303] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 28
[ 0.914451] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 29
[ 0.914517] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region@0x8bf00000
[ 0.914602] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 30
[ 0.914700] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 31
[ 0.914830] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_fd to group 32
[ 0.914906] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 33
[ 0.915710] register_client_adhoc:find path.src 1 dest 589
[ 0.915873] register_client_adhoc:Client handle 28 cam_ahb
[ 0.915984] register_client_adhoc:find path.src 136 dest 512
[ 0.916106] register_client_adhoc:Client handle 29 cam_hf_1_mnoc
[ 0.916295] register_client_adhoc:find path.src 146 dest 778
[ 0.916330] register_client_adhoc:Client handle 30 cam_hf_1_camnoc
[ 0.916428] register_client_adhoc:find path.src 145 dest 512
[ 0.916546] register_client_adhoc:Client handle 31 cam_hf_2_mnoc
[ 0.916724] register_client_adhoc:find path.src 147 dest 778
[ 0.916754] register_client_adhoc:Client handle 32 cam_hf_2_camnoc
[ 0.916854] register_client_adhoc:find path.src 137 dest 512
[ 0.916983] register_client_adhoc:Client handle 33 cam_sf_1_mnoc
[ 0.917150] register_client_adhoc:find path.src 148 dest 778
[ 0.917183] register_client_adhoc:Client handle 34 cam_sf_1_camnoc
[ 0.924801] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 0
[ 0.924889] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 0
[ 0.927564] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 1
[ 0.927646] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 1
[ 0.928246] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 256 No clk named ife_dsp_clk found. Dev acc4000.qcom,vfe-lite
[ 0.928252] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 107 option clk get failed
[ 0.930272] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 2
[ 0.930354] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 2
[ 0.931648] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 148 Camera ISP probe complete
[ 0.932770] CAM_INFO: CAM: cam_res_mgr_probe: 681 Disable shared gpio support.
[ 0.933390] execprog: worker started
[ 0.933392] execprog: waiting for /dev/socket/property_service
[ 0.934659] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
[ 0.934675] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
[ 0.939604] CAM_ERR: CAM-SMMU: cam_smmu_create_add_handle_in_table: 608 Error: cam-secure already got handle 0x42562
[ 0.941498] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 146 Camera JPEG probe complete
[ 0.947539] SMB2: smb2_chg_config_init: PMI8998 Revision=0x2
[ 0.947561] SMB2: smb2_parse_dt: T1:-22, T2:-22, T3:-22, fcc1:-22, fcc1:-22, cut1:-22, cut2:-22,full:-22
[ 0.947566] SMB2: smb2_parse_dt: OTG_ICL:enable:1,CapThr:15,LowThr:1000000,NorThr:1500000
[ 0.947567] SMB2: smb2_parse_dt: q1:-22,q2:-22,q3:-22,NORMAL_CUTOFF:-22,warm:-22,FULL=-22
[ 0.947572] SMB2: smb2_parse_dt: T0=-30, T1=0, T2=50, T3=120, T4=160, T5=450, T6=530
[ 0.947573] SMB2: smb2_parse_dt: BATT_TEMP_LITTLE_COLD=275, 3975, 3700
[ 0.947574] SMB2: smb2_parse_dt: BATT_TEMP_COOL=425, 4400, 4150
[ 0.947574] SMB2: smb2_parse_dt: BATT_TEMP_LITTLE_COOL=725, 4400, 4270
[ 0.947575] SMB2: smb2_parse_dt: BATT_TEMP_PRE_NORMAL=1375, 4400, 4270
[ 0.947576] SMB2: smb2_parse_dt: BATT_TEMP_NORMAL=1950, 4400, 4270
[ 0.947576] SMB2: smb2_parse_dt: BATT_TEMP_WARM=750, 4080, 3980
[ 0.947577] SMB2: smb2_parse_dt: cutoff_volt_with_charger=3250, disable-pd=1
[ 0.947580] SMB2: smb2_parse_dt: sw_iterm_ma=264,check_batt_full_by_sw=1
[ 0.947665] SMBLIB: op_set_collapse_fet: USBIN_5V_AICL_THRESHOLD_CFG_REG(0x1381)=0x3
[ 0.947687] SMBLIB: op_set_collapse_fet: USBIN_CONT_AICL_THRESHOLD_CFG_REG(0x1384)=0x3
[ 0.947742] SMBLIB: op_set_collapse_fet: USBIN_AICL_OPTIONS_CFG_REG(0x1380)=0xc7
[ 0.947782] SMBLIB: op_set_collapse_fet: USBIN_LOAD_CFG_REG(0x1365)=0xf7
[ 0.948111] SMBLIB: op_battery_temp_region_set: set temp_region=5
[ 0.948184] register_client_adhoc:find path.src 1 dest 731
[ 0.948400] register_client_adhoc:Client handle 35 dash_clk_vote
[ 0.948808] actuator_regulator: Failed to create debugfs directory
[ 0.948901] actuator_regulator: Failed to create debugfs directory
[ 0.948961] SMB2: smb2_init_hw: vbat_max=4365000, ibat_max=500000, iusb_max=1800000
[ 0.949129] SMBLIB: smblib_set_dc_suspend: 0
[ 0.949180] SMBLIB: smblib_dc_icl_vote_callback: dc icl set 1200000
[ 0.949345] SMBLIB: smblib_chg_disable_vote_callback: set chg_disable=0
[ 0.950233] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.950239] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.950514] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 0.950593] SMBLIB: smblib_usb_plugin_locked: V fail rc=-517
[ 0.950597] SMBLIB: smblib_usb_plugin_locked: IRQ: detached
[ 0.950602] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.950605] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.950638] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.950742] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 0.950798] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.950812] SMBLIB: smblib_handle_usb_source_change: APSD_STATUS=0x00
[ 0.950826] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 0.950925] SMBLIB: smblib_set_icl_current: icl_ua=25000
[ 0.950928] SMBLIB: smblib_set_usb_suspend: suspend=1
[ 0.950960] SMBLIB: smblib_set_icl_current: icl_ua=2147483647
[ 0.951002] SMBLIB: smblib_set_usb_suspend: suspend=0
[ 0.951204] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 0.951288] SMBLIB: get_property_from_fg: no bms psy found
[ 0.951294] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
[ 0.951299] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.951302] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.951346] SMBLIB: get_property_from_fg: no bms psy found
[ 0.951351] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
[ 0.951354] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.951358] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.951451] SMBLIB: op_get_fastchg_ing: no fast_charger register found
[ 0.951615] SMBLIB: get_property_from_fg: no bms psy found
[ 0.951619] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
[ 0.951622] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.951626] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.951665] SMBLIB: get_property_from_fg: no bms psy found
[ 0.951668] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
[ 0.951671] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.951676] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.951762] SMBLIB: op_get_fastchg_ing: no fast_charger register found
[ 0.958919] SMBLIB: smblib_set_icl_current: icl_ua=25000
[ 0.958921] SMBLIB: smblib_set_usb_suspend: suspend=1
[ 0.958953] SMBLIB: smblib_set_icl_current: icl_ua=2147483647
[ 0.958976] SMBLIB: smblib_set_usb_suspend: suspend=0
[ 0.959121] SMB2: smb2_probe: QPNP SMB2 probed successfully usb:present=0 type=0 batt:present = 1 health = 1 charge = 1
[ 0.959715] BQ: bq27541_parse_dt: di->is_mcl_verion=0
[ 0.960330] SMBLIB: get_property_from_fg: no bms psy found
[ 0.960337] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
[ 0.960341] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.960345] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.960399] SMBLIB: get_property_from_fg: no bms psy found
[ 0.960403] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
[ 0.960407] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
[ 0.960410] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
[ 0.960506] SMBLIB: op_get_fastchg_ing: no fast_charger register found
[ 0.960678] BQ: bq27541_battery_probe: probe success battery exist
[ 0.961017] FASTCHG: dash_probe: dash_probe
[ 0.963384] FASTCHG: check_n76e_support: n76e not exist
[ 0.963386] FASTCHG: check_enhance_support: enhance dash not exist
[ 0.963389] FASTCHG: dash_probe: dash_probe success
[ 0.963409] dash_adapter_init success
[ 0.970300] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 0.978756] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 0.978769] thermal thermal_zone63: failed to read out thermal zone (-61)
[ 0.978775] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 0.978779] thermal thermal_zone63: failed to read out thermal zone (-61)
[ 0.978808] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 0.980379] 17d41000.qcom,cpucc:qcom,limits-dcvs@0 supply isens_vref not found, using dummy regulator
[ 0.980422] msm_lmh_dcvs:limits_isens_vref_ldo_init Regulator:isens_vref settings read error:-22
[ 0.991028] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 0.991040] thermal thermal_zone63: failed to read out thermal zone (-61)
[ 0.994462] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 0.994469] thermal thermal_zone63: failed to read out thermal zone (-61)
[ 1.007907] device-mapper: uevent: version 1.0.3
[ 1.008028] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx
[ 1.008174] device-mapper: req-crypt: dm-req-crypt successfully initalized.\x0a
[ 1.008503] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
[ 1.008527] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
[ 1.008530] bt_dt_parse_clk_info: clocks is not provided in device tree
[ 1.008534] bt_power_populate_dt_pinfo: clock not provided in device tree
[ 1.008646] CHRDEV "bt" major number 232 goes below the dynamic allocation range
[ 1.010138] haptics: qpnp_haptics_probe: qpnp_haptics_probe done
[ 1.010458] usbcore: registered new interface driver usbhid
[ 1.010460] usbhid: USB HID core driver
[ 1.010547] ashmem: initialized
[ 1.010554] CHRDEV "qcwlanstate" major number 231 goes below the dynamic allocation range
[ 1.010585] wlan_hdd_state wlan major(231) initialized
[ 1.010590] ipa_ut ipa_ut_module_init:1044 Loading IPA test module...
[ 1.010704] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
[ 1.011316] bimc-bwmon 1436400.qcom,cpu-bwmon: BW HWmon governor registered.
[ 1.011348] bimc-bwmon 114a000.qcom,llcc-bwmon: BW HWmon governor registered.
[ 1.011686] arm-memlat-mon soc:qcom,cpu0-memlat-mon: Memory Latency governor registered.
[ 1.011710] arm-memlat-mon soc:qcom,cpu4-memlat-mon: Memory Latency governor registered.
[ 1.011732] arm-memlat-mon soc:qcom,cpu0-l3lat-mon: Memory Latency governor registered.
[ 1.011750] arm-memlat-mon soc:qcom,cpu4-l3lat-mon: Memory Latency governor registered.
[ 1.011768] arm-memlat-mon soc:qcom,devfreq-compute: Compute governor registered.
[ 1.012263] register_client_adhoc:find path.src 1 dest 770
[ 1.012422] register_client_adhoc:Client handle 36 soc:qcom,cpubw
[ 1.012901] register_client_adhoc:find path.src 129 dest 512
[ 1.012938] register_client_adhoc:Client handle 37 soc:qcom,llccbw
[ 1.014354] register_client_adhoc:find path.src 1 dest 512
[ 1.014465] register_client_adhoc:Client handle 38 soc:qcom,memlat-cpu0
[ 1.014646] register_client_adhoc:find path.src 1 dest 512
[ 1.014758] register_client_adhoc:Client handle 39 soc:qcom,memlat-cpu4
[ 1.014942] register_client_adhoc:find path.src 139 dest 627
[ 1.015017] register_client_adhoc:Client handle 40 soc:qcom,snoc_cnoc_keepalive
[ 1.015137] register_client_adhoc:find path.src 1 dest 512
[ 1.015244] register_client_adhoc:Client handle 41 soc:qcom,mincpubw
[ 1.015495] register_client_adhoc:find path.src 26 dest 512
[ 1.015567] register_client_adhoc:Client handle 42 soc:qcom,gpubw
[ 1.016862] extcon_data->key3_gpio=126
[ 1.016865] extcon_data->key2_gpio=52
[ 1.016867] extcon_data->key1_gpio=24
[ 1.017616] CHRDEV "esoc" major number 230 goes below the dynamic allocation range
[ 1.017862] CHRDEV "sensors" major number 229 goes below the dynamic allocation range
[ 1.017992] usbcore: registered new interface driver snd-usb-audio
[ 1.026355] msm-cdc-pinctrl soc:msm_cdc_pinctrl@49: msm_cdc_pinctrl_probe: Cannot get cdc gpio pinctrl:-19
[ 1.026871] ****** max98927_i2c_probe id.name =max98927L id.driver_data= 0
[ 1.026875] max98927_reset:69------
[ 1.050330] max98927 device version 0x42
[ 1.059472] ****** max98927_i2c_probe snd_soc_register_codec id =0
[ 1.059474] max98927 register codec ok.
[ 1.059523] tfa98xx_i2c_init(): TFA98XX driver version v6.5.2
[ 1.059564] fsa4480 driver fsa4480_i2c_init
[ 1.060086] CHRDEV "avtimer" major number 228 goes below the dynamic allocation range
[ 1.060626] apr_probe: Unable to create ipc log context
[ 1.060785] CHRDEV "wcd-dsp-glink" major number 227 goes below the dynamic allocation range
[ 1.061128] GACT probability NOT on
[ 1.061137] Mirror/redirect action on
[ 1.061142] u32 classifier
[ 1.061143] Actions configured
[ 1.061146] Netfilter messages via NETLINK v0.30.
[ 1.061226] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 1.061275] ctnetlink v0.93: registering with nfnetlink.
[ 1.061414] xt_time: kernel timezone is -0000
[ 1.061438] wireguard: WireGuard 0.0.20190227 loaded. See www.wireguard.com for information.
[ 1.061439] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@xxxxxxxxx>. All Rights Reserved.
[ 1.061467] IPv4 over IPsec tunneling driver
[ 1.061606] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.061674] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 1.061687] Initializing XFRM netlink socket
[ 1.061756] NET: Registered protocol family 10
[ 1.062095] mip6: Mobile IPv6
[ 1.062101] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.062263] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.062445] NET: Registered protocol family 17
[ 1.062451] NET: Registered protocol family 15
[ 1.062458] Ebtables v2.0 registered
[ 1.062515] l2tp_core: L2TP core driver, V2.0
[ 1.062518] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.062519] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 1.062524] l2tp_netlink: L2TP netlink interface
[ 1.062533] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 1.062534] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 1.062748] NET: Registered protocol family 27
[ 1.062749] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR]
[ 1.063228] actuator_regulator: Failed to create debugfs directory
[ 1.065862] minidump-id not found for adsp
[ 1.065981] subsys-pil-tz 17300000.qcom,lpass: for adsp segments only will be dumped.
[ 1.066249] minidump-id not found for slpi
[ 1.066335] subsys-pil-tz 5c00000.qcom,ssc: for slpi segments only will be dumped.
[ 1.066504] minidump-id not found for cdsp
[ 1.066588] subsys-pil-tz 8300000.qcom,turing: for cdsp segments only will be dumped.
[ 1.066808] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
[ 1.066916] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node mba_region@0x96500000
[ 1.067042] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
[ 1.067055] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
[ 1.067923] Force USB running as High speed
[ 1.068634] dwc3 a600000.dwc3: Error getting ipc_log_ctxt
[ 1.068728] register_client_adhoc:find path.src 61 dest 512
[ 1.068914] register_client_adhoc:find path.src 61 dest 676
[ 1.069018] register_client_adhoc:find path.src 1 dest 583
[ 1.069130] register_client_adhoc:Client handle 43 usb0
[ 1.069215] Invalid index Defaulting curr to 0
[ 1.069415] msm-dwc3 a600000.ssusb: Not attached
[ 1.070556] FG: fg_parse_dt: use_external_fg=1
[ 1.078277] FG: fg_gen3_probe: battery SOC:50 voltage: 4199696uV temp: 310
[ 1.078854] qcom,fg-gen3 c440000.qcom,spmi:qcom,pmi8998@2:qpnp,fg: thermal_zone_of_sensor_register() failed rc:-19
[ 1.083376] FG: fg_psy_get_property: unsupported property 24
[ 1.083410] SMBLIB: load_data: stored_soc[0xb8], shutdown_soc[92]
[ 1.085370] FG: fg_psy_get_property: unsupported property 1
[ 1.200076] synaptics,s3320: after on cpu [0]
[ 1.200082] synaptics,s3320: synaptics_ts_probe is called
[ 1.200102] synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1
[ 1.200109] synaptics,s3320: synaptics,tx-rx-num is 15 30
[ 1.200114] synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10
[ 1.200151] synaptics,s3320: synaptics_parse_dts: avdd current = 20000
[ 1.200233] synaptics,s3320: synaptics_parse_dts:avdd_vmin=3008000,avdd_vmax=3008000
[ 1.200343] 3-0020 supply vcc_i2c_1v8 not found, using dummy regulator
[ 1.200379] synaptics,s3320: synaptics_parse_dts: Failed to get regulator vdd current
[ 1.200384] synaptics,s3320: synaptics_parse_dts: Failed to get regulator vdd voltage
[ 1.237020] thermal thermal_zone64: failed to read out thermal zone (-61)
[ 1.238057] register_client_adhoc:find path.src 61 dest 512
[ 1.238209] register_client_adhoc:find path.src 61 dest 676
[ 1.238308] register_client_adhoc:find path.src 1 dest 583
[ 1.238413] register_client_adhoc:Client handle 43 usb0
[ 1.238805] Registered cp15_barrier emulation handler
[ 1.238830] Registered setend emulation handler
[ 1.238843] core_ctl: Creating CPU group 0
[ 1.238845] core_ctl: Init CPU0 state
[ 1.238845] core_ctl: Init CPU1 state
[ 1.238846] core_ctl: Init CPU2 state
[ 1.238847] core_ctl: Init CPU3 state
[ 1.238940] core_ctl: Creating CPU group 4
[ 1.238941] core_ctl: Init CPU4 state
[ 1.238941] core_ctl: Init CPU5 state
[ 1.238942] core_ctl: Init CPU6 state
[ 1.238942] core_ctl: Init CPU7 state
[ 1.239183] registered taskstats version 1
[ 1.241502] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
[ 1.242780] msm-dwc3 a600000.ssusb: DWC3 in low power mode
[ 1.258072] spss_utils [spss_init]: spss-utils driver Ver 2.0 30-Mar-2017.
[ 1.260659] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 34
[ 1.261095] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 35
[ 1.261350] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 36
[ 1.261598] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 37
[ 1.261845] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 38
[ 1.262099] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 39
[ 1.262347] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 40
[ 1.262595] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 41
[ 1.262842] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 42
[ 1.263537] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 43
[ 1.263613] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
[ 1.263637] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 44
[ 1.263885] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 45
[ 1.264545] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
[ 1.264554] CHRDEV "adsprpc-smd" major number 225 goes below the dynamic allocation range
[ 1.265190] ngd_msm_ctrl 171c0000.slim: error creating ipc_logging context
[ 1.265245] iommu: Adding device 171c0000.slim:qcom,iommu_slim_ctrl_cb to group 46
[ 1.266073] ngd_msm_ctrl 17240000.slim: error creating ipc_logging context
[ 1.266165] iommu: Adding device 17240000.slim:qcom,iommu_slim_ctrl_cb to group 47
[ 1.267707] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input2
[ 1.267837] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: setting system clock to 1970-01-03 10:12:14 UTC (209534)
[ 1.268404] lpm_levels_of: idx 1 7100
[ 1.268406] lpm_levels_of: idx 2 5989
[ 1.268407] lpm_levels_of: idx 2 3933
[ 1.268442] lpm_levels_of: idx 1 1744
[ 1.268443] lpm_levels_of: idx 2 1000
[ 1.268444] lpm_levels_of: Residency < 0 for LPM
[ 1.268446] lpm_levels_of: idx 2 1000
[ 1.268473] lpm_levels: register_cluster_lpm_stats()
[ 1.268531] lpm_levels: register_cluster_lpm_stats()
[ 1.270942] rmnet_ipa3 started initialization
[ 1.271041] RNDIS_IPA module is loaded.
[ 1.272396] msm_bus_late_init: Remove handoff bw requests
[ 1.272999] actuator_regulator: Failed to create debugfs directory
[ 1.273027] ufs_card_gdsc: disabling
[ 1.273079] actuator_regulator: disabling
[ 1.273080] actuator_regulator: disabling
[ 1.273087] ext_5v_boost: disabling
[ 1.273089] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[ 1.273190] ALSA device list:
[ 1.273191] No soundcards found.
[ 1.273214] Warning: unable to open an initial console.
[ 1.273318] Freeing unused kernel memory: 576K
[ 1.283498] EXT4-fs (sda14): mounted filesystem without journal. Opts: (null)
[ 1.286164] EXT4-fs (sde44): mounted filesystem without journal. Opts: (null)
[ 1.344345] synaptics,s3320: F12_2D_QUERY_BASE = 4a \x0a \x09\x09\x09F12_2D_CMD_BASE = 0 \x0a\x09\x09\x09F12_2D_CTRL_BASE\x09= 13 \x0a\x09\x09\x09F12_2D_DATA_BASE\x09= 8 \x0a\x09\x09\x09
[ 1.344952] synaptics,s3320: F34_FLASH_QUERY_BASE = 23 \x0a\x09\x09\x09F34_FLASH_CMD_BASE\x09= 0 \x0a\x09\x09\x09F34_FLASH_CTRL_BASE\x09= c \x0a\x09\x09\x09F34_FLASH_DATA_BASE\x09= 0 \x0a\x09\x09\x09
[ 1.345939] synaptics,s3320: F54_QUERY_BASE = 43 \x0a\x09\x09\x09F54_CMD_BASE = 42 \x0a\x09\x09\x09F54_CTRL_BASE\x09= e \x0a\x09\x09\x09F54_DATA_BASE\x09= 0 \x0a\x09\x09\x09
[ 1.346368] synaptics,s3320: before fw update bootloader_mode[0x0]
[ 1.347902] synaptics,s3320: CURRENT_FIRMWARE_ID = 0x4543313031303134
[ 1.352823] synaptics,s3320: max_x = 1080,max_y = 2280; max_x_ic = 1079,max_y_ic = 2279
[ 1.353851] synaptics,s3320: synaptics_soft_reset !!!
[ 1.440512] of_batterydata_get_best_profile: OP_3300mah found
[ 1.457160] synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x67 !
[ 1.457630] input: synaptics,s3320 as /devices/platform/soc/a90000.i2c/i2c-3/3-0020/input/input3
[ 1.510070] synaptics,s3320: synaptic:ts->irq is 377
[ 1.520966] synaptics,s3320: synaptics_ts_probe 3203: normal end
[ 1.830782] init: init first stage started!
[ 1.830863] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 1.831252] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
[ 1.893549] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 1.947431] FG: fg_psy_get_property: unsupported property 1
[ 1.971195] EXT4-fs (sde44): mounted filesystem without journal. Opts: barrier=1,discard
[ 1.971232] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/1d84000.ufshc/by-name/vendor_b,target=/vendor,type=ext4)=0: Success
[ 1.971294] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
[ 1.971347] init: Loading SELinux policy
[ 1.971380] selinux: SELinux: op_load_policy default\x0a
[ 1.973543] SELinux: 65536 avtab hash slots, 268543 rules.
[ 1.981695] BQ: bq27541_hw_config: DEVICE_BQ27411
[ 1.983314] BQ: check_df_version: DEVICE DF:177
[ 1.983315] BQ: bq27541_hw_config: DEVICE_TYPE is 0x421, FIRMWARE_VERSION is 0x109
[ 1.983316] BQ: bq27541_hw_config: Complete bq27541 configuration 0x208A
[ 2.000397] SELinux: 65536 avtab hash slots, 268543 rules.
[ 2.000407] SELinux: 1 users, 4 roles, 2221 types, 0 bools, 1 sens, 1024 cats
[ 2.000410] SELinux: 93 classes, 268543 rules
[ 2.001401] SELinux: Completing initialization.
[ 2.001402] SELinux: Setting up existing superblocks.
[ 2.034987] selinux: SELinux: Loaded policy from /sepolicy\x0a
[ 2.040420] selinux: SELinux: Loaded file_contexts\x0a
[ 2.041716] init: init second stage started!
[ 2.051181] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.053302] selinux: SELinux: Loaded file_contexts\x0a
[ 2.053308] init: Running restorecon...
[ 2.056475] init: waitid failed: No child processes
[ 2.058039] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
[ 2.059257] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:exported_secure_prop:s0 tclass=property_service permissive=0\x0a
[ 2.059265] init: Unable to set property 'ro.adb.secure' to '1' in property file '/vendor/default.prop': SELinux permission check failed
[ 2.059500] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
[ 2.059932] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 498
[ 2.070062] execprog: saving binary to userspace
[ 2.097213] ueventd: ueventd started!
[ 2.101499] selinux: SELinux: Loaded file_contexts\x0a
[ 2.101530] ueventd: Parsing file /ueventd.rc...
[ 2.101978] ueventd: Parsing file /vendor/ueventd.rc...
[ 2.104115] ueventd: Parsing file /odm/ueventd.rc...
[ 2.104134] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 2.104192] ueventd: Parsing file /ueventd.qcom.rc...
[ 2.104208] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory
[ 2.124930] execprog: execution finished
[ 2.176982] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 2.193888] killall:
[ 2.193890] msm_irqbalance
[ 2.193892] : No such process
[ 2.193894]
[ 2.230789] FG: fg_psy_get_property: unsupported property 1
[ 3.429584] ueventd: Coldboot took 1.324 seconds
[ 3.502385] keychord: using input dev qpnp_pon for fevent
[ 3.502388] keychord: using input dev gf_input for fevent
[ 3.502390] keychord: using input dev gpio-keys for fevent
[ 3.512252] Registered swp emulation handler
[ 3.576156] init: wait for '/dev/block/platform/soc/1d84000.ufshc' took 0ms
[ 3.577026] init: mount_tempfs=0
[ 3.579989] EXT4-fs (sda17): Ignoring removed nomblk_io_submit option
[ 3.629782] EXT4-fs (sda17): recovery complete
[ 3.630395] EXT4-fs (sda17): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 4.169449] e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a
[ 4.169461] e2fsck: Pass 1: Checking inodes, blocks, and sizes\x0a
[ 4.169463] e2fsck: Pass 2: Checking directory structure\x0a
[ 4.169464] e2fsck: Pass 3: Checking directory connectivity\x0a
[ 4.169466] e2fsck: Pass 4: Checking reference counts\x0a
[ 4.169467] e2fsck: Pass 5: Checking group summary information\x0a
[ 4.169469] e2fsck: /dev/block/bootdevice/by-name/userdata: 28831/7208960 files (2.2% non-contiguous), 2098521/28835840 blocks\x0a
[ 4.175554] EXT4-fs (sda17): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
[ 4.179428] EXT4-fs (sde37): mounted filesystem with ordered data mode. Opts: barrier=1
[ 4.181337] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1
[ 4.187464] EXT4-fs (sde59): mounted filesystem with ordered data mode. Opts:
[ 4.188970] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: barrier=1
[ 4.205280] logd.auditd: start
[ 4.205286] logd.klogd: 4205269636
[ 4.226209] binder: 542:542 ioctl 4018620d 7ff38182e0 returned -22
[ 4.249984] QSEECOM: qseecom_register_listener: Service 8192 is registered
[ 4.250292] QSEECOM: qseecom_register_listener: Service 12288 is registered
[ 4.250598] QSEECOM: qseecom_register_listener: Service 16384 is registered
[ 4.252801] QSEECOM: qseecom_register_listener: Service 11 is registered
[ 4.253082] QSEECOM: qseecom_register_listener: Service 10 is registered
[ 4.254199] QSEECOM: qseecom_register_listener: Service 28672 is registered
[ 4.255131] QSEECOM: qseecom_register_listener: Service 36864 is registered
[ 4.255914] QSEECOM: qseecom_register_listener: Service 45056 is registered
[ 4.257105] QSEECOM: qseecom_register_listener: Service 4352 is registered
[ 4.337304] IPA smmu_info.s1_bypass_arr[AP]=1 smmu_info.fast_map=0
[ 4.337508] IPA smmu_info.s1_bypass_arr[WLAN]=1 smmu_info.fast_map=0
[ 4.337773] IPA smmu_info.s1_bypass_arr[UC]=1 smmu_info.fast_map=0
[ 4.338286] ipa ipa3_uc_state_check:284 uC interface not initialized
[ 4.340945] ueventd: firmware: loading 'ipa_fws.mdt' for '/devices/platform/soc/soc:qcom,ipa_fws/firmware/ipa_fws.mdt'
[ 4.344141] subsys-pil-tz soc:qcom,ipa_fws: ipa_fws: loading from 0x000000008c400000 to 0x000000008c405000
[ 4.377905] subsys-pil-tz soc:qcom,ipa_fws: ipa_fws: Brought out of reset
[ 4.377951] ipa ipa3_uc_state_check:284 uC interface not initialized
[ 4.378254] IPA FW loaded successfully
[ 4.378534] ipa ipa3_uc_state_check:284 uC interface not initialized
[ 4.382538] vdc: Waited 20ms for vold
[ 4.383505] ipahal ipahal_init:1577 failed to create IPA regdump log, continue...
[ 4.383587] CHRDEV "ipaNatTable" major number 224 goes below the dynamic allocation range
[ 4.383638] ipa ipa3_set_resorce_groups_min_max_limits:4968 skip configuring ipa_rx_hps_clients from HLOS
[ 4.383799] gsi soc:qcom,msm_gsi: gsi_register_device:839 GSI irq is wake enabled 106
[ 4.386122] CHRDEV "ipa_tethering_bridge" major number 223 goes below the dynamic allocation range
[ 4.386361] rmnet_ipa3 started initialization
[ 4.386364] IPA SSR support = True
[ 4.386365] IPA ipa-loaduC = True
[ 4.386366] IPA SG support = True
[ 4.386367] IPA Napi Enable = True
[ 4.386368] using default for wan-rx-desc-size = 256
[ 4.386414] IPA driver initialization was successful.
[ 4.387176] CHRDEV "wwan_ioctl" major number 222 goes below the dynamic allocation range
[ 4.387511] rmnet_ipa completed initialization
[ 4.405484] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)"
[ 4.433280] ipa ipa3_uc_state_check:289 uC is not loaded
[ 4.465532] vdc: Waited 0ms for vold
[ 4.509124] init: oem_property_main
[ 4.548400] logd: logdr: UID=0 GID=0 PID=608 n tail=0 logMask=19 pid=0 start=0ns timeout=0ns
[ 4.555867] logd: logdr: UID=0 GID=0 PID=611 b tail=0 logMask=19 pid=0 start=0ns timeout=0ns
[ 4.565646] SELinux: Context is not valid (left unmapped).
[ 4.574578] init: e4crypt_set_directory_policy ro.boot.qe =
[ 4.574601] init: Setting policy on /data/fpc_images
[ 4.575004] init: Found policy 7709e4b766230604 at /data/fpc_images which matches expected value
[ 4.575806] init: e4crypt_set_directory_policy ro.boot.qe =
[ 4.575818] init: Setting policy on /data/fpc
[ 4.576203] init: Policy for /data/fpc set to 7709e4b766230604 modes 127/4
[ 4.579721] init: Not setting policy on /data/media
[ 4.584431] init: e4crypt_set_directory_policy ro.boot.qe =
[ 4.584449] init: Setting policy on /data/connectivity
[ 4.622915] update_verifier: Started with arg 1: nonencrypted
[ 4.626552] update_verifier: Booting slot 1: isSlotMarkedSuccessful=1
[ 4.626557] update_verifier: Leaving update_verifier.
[ 4.868637] init: oem_property_main
[ 4.870836] subsys-restart: __subsystem_get(): Changing subsys fw_name to slpi
[ 4.876350] logd.daemon: reinit
[ 4.876633] subsys-pil-tz 17300000.qcom,lpass: adsp: loading from 0x000000008c500000 to 0x000000008df00000
[ 4.876737] subsys-pil-tz 8300000.qcom,turing: cdsp: loading from 0x0000000095d00000 to 0x0000000096500000
[ 4.876884] subsys-pil-tz 5c00000.qcom,ssc: slpi: loading from 0x0000000096700000 to 0x0000000097880000
[ 5.020903] subsys-pil-tz 8300000.qcom,turing: cdsp: Brought out of reset
[ 5.030643] subsys-pil-tz 8300000.qcom,turing: Subsystem error monitoring/handling services are up
[ 5.037489] subsys-pil-tz 8300000.qcom,turing: cdsp: Power/Clock ready interrupt received
[ 5.043218] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [cdsp_IPCRTR]
[ 5.053008] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and cdsp's SSCTL service
[ 5.078033] dashd: dashd_main enterd
[ 5.078042] dashd: run /sbin/dashd ENGINE START!
[ 5.078070] FASTCHG: dash_dev_write: fw_ver_count=5746
[ 5.078106] dashd: THREAD is created!
[ 5.078812] dashd: type=USB_PD, soc=92, temp=25, vbat=4000, ibat=0
[ 5.086911] dashd: THREAD running
[ 5.086933] dashd: dash read
[ 5.114416] rmt_storage:INFO:check_support_using_libmdm: Modem subsystem found on target!
[ 5.116386] rmt_storage:INFO:main: Done with init now waiting for messages!
[ 5.134231] servloc: service_locator_svc_arrive: Connection established with the Service locator
[ 5.134264] servloc: init_service_locator: Service locator initialized
[ 5.140065] subsys-pil-tz 17300000.qcom,lpass: adsp: Brought out of reset
[ 5.144362] subsys-pil-tz 17300000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 5.145146] apr_tal_link_state_cb: edge[lpass] link state[0]
[ 5.145389] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [lpass_IPCRTR]
[ 5.150708] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
[ 5.152081] subsys-pil-tz 17300000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 5.153397] audio_notifer_reg_service: service PDR_ADSP is in use
[ 5.155989] service-notifier: root_service_service_arrive: Connection established between QMI handle and 74 service
[ 5.168615] service-notifier: root_service_service_ind_cb: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
[ 5.169470] smartpa dts config is max98927
[ 5.169476] smartpa_present
[ 5.173416] service-notifier: send_ind_ack: Indication ACKed for transid 1, service msm/adsp/audio_pd, instance 74!
[ 5.194792] subsys-pil-tz 5c00000.qcom,ssc: slpi: Brought out of reset
[ 5.196950] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000017184000
[ 5.196957] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000017184000
[ 5.196960] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000017184000
[ 5.196962] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000017184000
[ 5.196964] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000017184000
[ 5.197112] sps:BAM 0x0000000017184000 (va:0x0000000000000000) enabled: ver:0x19, number of pipes:23
[ 5.197114] sps:BAM 0x0000000017184000 is registered.
[ 5.210097] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000017204000
[ 5.210106] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000017204000
[ 5.210108] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000017204000
[ 5.210110] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000017204000
[ 5.210112] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000017204000
[ 5.210155] sps:BAM 0x0000000017204000 (va:0x0000000000000000) enabled: ver:0x19, number of pipes:13
[ 5.210156] sps:BAM 0x0000000017204000 is registered.
[ 5.224166] healthd: Unknown power supply type 'BMS'
[ 5.224193] healthd: Unknown power supply type 'Main'
[ 5.235076] subsys-pil-tz 5c00000.qcom,ssc: Subsystem error monitoring/handling services are up
[ 5.241992] subsys-pil-tz 5c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
[ 5.251779] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [dsps_IPCRTR]
[ 5.254723] healthd: battery l=92 v=4000 t=25.0 h=2 st=3 c=0 fc=2878000 cc=0 chg=
[ 5.261509] healthd: Unknown power supply type 'BMS'
[ 5.261540] healthd: Unknown power supply type 'Main'
[ 5.267149] healthd: battery l=92 v=4000 t=25.0 h=2 st=3 c=0 fc=2878000 cc=0 chg=
[ 5.280177] logd: logdr: UID=0 GID=0 PID=773 b tail=0 logMask=2 pid=0 start=0ns timeout=0ns
[ 5.280390] logd: logdr: UID=0 GID=0 PID=775 b tail=0 logMask=80 pid=0 start=0ns timeout=0ns
[ 5.280466] logd: logdr: UID=0 GID=0 PID=774 b tail=0 logMask=4 pid=0 start=0ns timeout=0ns
[ 5.280559] logd: logdr: UID=0 GID=0 PID=772 b tail=0 logMask=19 pid=0 start=0ns timeout=0ns
[ 5.296203] Mass Storage Function, version: 2009/09/11
[ 5.296210] LUN: removable read only CD-ROM file: (no medium)
[ 5.316976] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: msm_init_wsa_dev: Max WSA devices is 0 for this target?
[ 5.317040] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 5.322620] slimbus sb-1: of_slim: invalid E-addr
[ 5.323278] wcd-slim tavil-slim-pgd: Platform data from device tree
[ 5.323786] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
[ 5.323913] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
[ 5.323983] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[ 5.324043] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[ 5.324103] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[ 5.324179] wcd-slim tavil-slim-pgd: wcd9xxx_slim_probe: probing for wcd type: 4, name: tavil-slim-pgd
[ 5.326175] smartpa dts config is max98927
[ 5.326182] smartpa_present
[ 5.330350] file system registered
[ 5.331361] CHRDEV "msm_usb_bridge" major number 221 goes below the dynamic allocation range
[ 5.332612] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
[ 5.333938] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
[ 5.334844] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2)
[ 5.347713] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
[ 5.352294] boot_mode:
[ 5.365782] synaptics,s3320: start update ******* fw_name:tp/fw_synaptics_17819.img,ts->manu_name:S3706B
[ 5.365791] synaptics,s3320: enter version 17819 update mode
[ 5.380412] slimbus:1 laddr:0xcf, EAPC:0x1:0x50
[ 5.380628] wcd-slim tavil-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
[ 5.380832] slimbus:1 laddr:0xce, EAPC:0x0:0x50
[ 5.382932] wcd-slim tavil-slim-pgd: wcd934x_get_cdc_info: wcd9xxx chip id major 0x108, minor 0x1
[ 5.382940] wcd9xxx_core_res_init: num_irqs = 32, num_irq_regs = 4
[ 5.383054] synaptics,s3320: FW_ID:2827775--CONFIG_ID FW_NAME:tp/fw_synaptics_17819.img
[ 5.391728] synaptics,s3320_firmware: fwu_start_reflash: Start of reflash process
[ 5.392354] synaptics,s3320_firmware: fwu_go_nogo: Device firmware ID = 2827775
[ 5.392358] synaptics,s3320_firmware: fwu_go_nogo: Image firmware ID = 2827775
[ 5.393493] synaptics,s3320_firmware: fwu_go_nogo: No need to do reflash
[ 5.394537] synaptics,s3320_firmware: fwu_start_reflash: End of reflash process
[ 5.444461] kgsl kgsl-3d0: loading /vendor/firmware_mnt/image/a630_sqe.fw failed with error -13
[ 5.446160] kgsl kgsl-3d0: loading /vendor/firmware_mnt/image/a630_gmu.bin failed with error -13
[ 5.448062] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: msm_init_wsa_dev: Max WSA devices is 0 for this target?
[ 5.448124] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 5.449111] slimbus sb-3: of_slim: invalid E-addr
[ 5.450642] 'opened /dev/sdsprpc-smd c 225 2'
[ 5.451049] smartpa dts config is max98927
[ 5.451053] smartpa_present
[ 5.480892] QSEECOM: qseecom_load_app: App (soter64) does'nt exist, loading apps for first time
[ 5.509759] QSEECOM: qseecom_load_app: App with id 2 (soter64) now loaded
[ 5.523781] subsys-pil-tz soc:qcom,kgsl-hyp: loading /vendor/firmware_mnt/image/a630_zap.mdt failed with error -13
[ 5.526037] subsys-pil-tz soc:qcom,kgsl-hyp: a630_zap: loading from 0x000000008c415000 to 0x000000008c416000
[ 5.546231] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: msm_init_wsa_dev: Max WSA devices is 0 for this target?
[ 5.546825] tavil_codec tavil_codec: tavil_soc_codec_probe()
[ 5.550425] subsys-pil-tz soc:qcom,kgsl-hyp: loading /vendor/firmware_mnt/image/a630_zap.b02 failed with error -13
[ 5.550752] .....wcd934x_edev probe success!
[ 5.554689] subsys-pil-tz soc:qcom,kgsl-hyp: a630_zap: Brought out of reset
[ 5.557178] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: for wdsp segments only will be dumped.
[ 5.557426] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound tavil_codec (ops 0xffffff80091d6b48)
[ 5.557588] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound spi0.0 (ops 0xffffff80091dc688)
[ 5.557591] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound soc:qcom,glink-spi-xprt-wdsp (ops 0xffffff800907f4e8)
[ 5.560685] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia17 Mixer
[ 5.560692] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia17 Mixer
[ 5.560697] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia18 Mixer
[ 5.560700] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia18 Mixer
[ 5.560703] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia19 Mixer
[ 5.560706] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia19 Mixer
[ 5.560720] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia28 Mixer
[ 5.560723] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia28 Mixer
[ 5.560727] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia29 Mixer
[ 5.560729] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia29 Mixer
[ 5.560750] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for QUAT_MI2S_TX --> QUAT_MI2S_TX --> MultiMedia17 Mixer
[ 5.560753] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> MultiMedia17 Mixer
[ 5.560756] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for QUAT_MI2S_TX --> QUAT_MI2S_TX --> MultiMedia19 Mixer
[ 5.560759] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> MultiMedia19 Mixer
[ 5.560772] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for QUAT_MI2S_TX --> QUAT_MI2S_TX --> MultiMedia28 Mixer
[ 5.560775] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> MultiMedia28 Mixer
[ 5.560778] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for QUAT_MI2S_TX --> QUAT_MI2S_TX --> MultiMedia29 Mixer
[ 5.560781] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> MultiMedia29 Mixer
[ 5.565182] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM_UL28
[ 5.565188] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia28 Mixer -> direct -> MM_UL28
[ 5.565209] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM_UL29
[ 5.565211] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia29 Mixer -> direct -> MM_UL29
[ 5.567276] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
[ 5.567279] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI_MI2S_TX -> PRI_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
[ 5.567298] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
[ 5.567301] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
[ 5.567319] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
[ 5.567321] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
[ 5.567334] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
[ 5.567337] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
[ 5.567351] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
[ 5.567353] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI_MI2S_TX -> PRI_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
[ 5.567372] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
[ 5.567374] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
[ 5.567392] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
[ 5.567394] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
[ 5.567407] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
[ 5.567410] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
[ 5.567456] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL28 MUX
[ 5.567459] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL28 MUX -> direct -> MM_UL28
[ 5.567480] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL29 MUX
[ 5.567482] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL29 MUX -> direct -> MM_UL29
[ 5.575482] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> VoLTE Stub Tx Mixer
[ 5.575489] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> VoLTE Stub Tx Mixer
[ 5.602547] spi_geni a80000.spi: tx_fifo 16 rx_fifo 16 tx_width 32
[ 5.700855] max98927_probe: enter
[ 5.716137] msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx
[ 5.722218] apr_tal_notify_state: Channel state[0]
[ 5.733084] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: no sink widget found for SpkrLeft IN
[ 5.733097] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: Failed to add route SPK1 OUT -> direct -> SpkrLeft IN
[ 5.733120] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: no sink widget found for SpkrRight IN
[ 5.733123] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: Failed to add route SPK2 OUT -> direct -> SpkrRight IN
[ 5.733143] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: wcd_mbhc_start: qcom,msm-mbhc-usbc-audio-supported in dt node is missing or false
[ 5.733145] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: wcd_mbhc_start: skipping USB c analog configuration
[ 5.747229] input: sdm845-tavil-snd-card Headset Jack as /devices/platform/soc/soc:qcom,msm-audio-apr/soc:qcom,msm-audio-apr:sound-tavil/sound/card0/input4
[ 5.747369] input: sdm845-tavil-snd-card Button Jack as /devices/platform/soc/soc:qcom,msm-audio-apr/soc:qcom,msm-audio-apr:sound-tavil/sound/card0/input5
[ 5.747416] keychord: using input dev sdm845-tavil-snd-card Button Jack for fevent
[ 5.748231] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: Sound card sdm845-tavil-snd-card registered
[ 5.748330] property qcom,us-euro-gpios not detected in node /soc/qcom,msm-audio-apr/sound-tavil
[ 5.748337] msm_asoc_machine_probe: fsa4480_enable is false
[ 5.748341] msm_prepare_us_euro
[ 5.748343] setHpSwGpioPin hp_sw_gpio gpio_is_valid failed
[ 5.748688] msm_get_pinctrl: could not get mi2s_disable pinstate
[ 5.754291] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2803 FW download done successfully
[ 6.026717] extcon_dev_work ,key[0]=1,key[1]=1,key[2]=0
[ 6.340385] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[ 6.606353] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 6.610753] CAM_ERR: CAM-SENSOR: cam_sensor_update_id_info: 486 Sensor Addr: 0x1010100 sensor_id: 0x13 sensor_mask: 0x0
[ 6.612848] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff
[ 6.613385] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
[ 6.613602] max98927_info_rivision_ctl
[ 6.613635] max98927_info_rivision_ctl
[ 6.613667] max98927_get_rivision_ctl
[ 6.613850] max98927_digital_gain_get: spk_gain setting returned 0
[ 6.619168] max98927_mono_out_get_l: value:128
[ 6.619350] max98927_mono_out_get_r: value:0
[ 6.620339] max98927_left_channel_enable_get: value:0
[ 6.620504] max98927_right_channel_enable_get: value:0
[ 6.623668] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 709 sensor id 0x13 matched
[ 6.623847] CAM_INFO: CAM-SENSOR: cam_sensor_match_id: 732 imx519 sensor_version: 0x10
[ 6.636964] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 744 sensor_id: 0x519, fuse_id:7ab0519070120210
[ 6.636971] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 866 Probe Succees,slot:0,slave_addr:0x34,sensor_id:0x519
[ 6.647219] CAM_ERR: CAM-SENSOR: cam_sensor_driver_cmd: 1094 fuse_id:7ab0519070120210
[ 6.748595] CAM_ERR: CAM-SENSOR: cam_sensor_update_id_info: 486 Sensor Addr: 0x0 sensor_id: 0x0 sensor_mask: 0x0
[ 6.761273] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 712 sensor id register is 0x0
[ 6.761372] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 866 Probe Succees,slot:2,slave_addr:0x20,sensor_id:0x371
[ 6.785265] CAM_ERR: CAM-SENSOR: cam_sensor_update_id_info: 486 Sensor Addr: 0x1010100 sensor_id: 0x61 sensor_mask: 0x0
[ 6.797942] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 706 sensor id 0x13 does not match 0x61
[ 6.830046] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 131 cam_sensor_subdev_ioctl failed
[ 6.830293] CAM_ERR: CAM-SENSOR: cam_sensor_update_id_info: 486 Sensor Addr: 0x1010100 sensor_id: 0x13 sensor_mask: 0x0
[ 6.842487] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 709 sensor id 0x13 matched
[ 6.842580] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 866 Probe Succees,slot:1,slave_addr:0x20,sensor_id:0x376
[ 6.892404] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 6.898455] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff
[ 6.898961] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
[ 6.899169] max98927_info_rivision_ctl
[ 6.899202] max98927_info_rivision_ctl
[ 6.899234] max98927_get_rivision_ctl
[ 6.899415] max98927_digital_gain_get: spk_gain setting returned 0
[ 6.903194] max98927_mono_out_get_l: value:128
[ 6.903381] max98927_mono_out_get_r: value:0
[ 6.903882] max98927_left_channel_enable_get: value:0
[ 6.903973] max98927_right_channel_enable_get: value:0
[ 6.973634] synaptics,s3320: F12_2D_QUERY_BASE = 4a \x0a \x09\x09\x09F12_2D_CMD_BASE = 0 \x0a\x09\x09\x09F12_2D_CTRL_BASE\x09= 13 \x0a\x09\x09\x09F12_2D_DATA_BASE\x09= 8 \x0a\x09\x09\x09
[ 6.974232] synaptics,s3320: F34_FLASH_QUERY_BASE = 23 \x0a\x09\x09\x09F34_FLASH_CMD_BASE\x09= 0 \x0a\x09\x09\x09F34_FLASH_CTRL_BASE\x09= c \x0a\x09\x09\x09F34_FLASH_DATA_BASE\x09= 0 \x0a\x09\x09\x09
[ 6.975140] synaptics,s3320: F54_QUERY_BASE = 43 \x0a\x09\x09\x09F54_CMD_BASE = 42 \x0a\x09\x09\x09F54_CTRL_BASE\x09= e \x0a\x09\x09\x09F54_DATA_BASE\x09= 0 \x0a\x09\x09\x09
[ 6.977089] synaptics,s3320: max_x = 1080,max_y = 2280; max_x_ic = 1079,max_y_ic = 2279
[ 6.977344] synaptics,s3320: Firmware self check success
[ 6.977935] synaptics,s3320: CURRENT_FIRMWARE_ID 0x4543313031303134!
[ 6.987599] set_dload_mode ON
[ 6.987891] CAM_ERR: CAM-EEPROM: cam_eeprom_read_memory: 159 OIS module 0x24
[ 6.990671] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 7.003185] ep0_open success!
[ 7.003195] read descriptors
[ 7.003201] read strings
[ 7.004076] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
[ 7.006364] ipa-wan ipa3_ssr_notifier_cb:2731 IPA received MPSS BEFORE_POWERUP
[ 7.006671] ipa ipa3_uc_state_check:289 uC is not loaded
[ 7.006679] ipa-wan ipa3_ssr_notifier_cb:2743 IPA BEFORE_POWERUP handling is complete
[ 7.007800] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x000000008e000000 to 0x0000000095800000
[ 7.015317] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
[ 7.015352] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x0000000096500000 to 0x0000000096600000
[ 7.035660] 'opened /dev/adsprpc-smd c 225 0'
[ 7.044481] init: starting service 'wifidisplayhalservice'...
[ 7.045334] init: starting service '0HuqVPR'...
[ 7.046072] init: Could not start service 'nqnfcinfo' as part of class 'late_start': Cannot find '/system/vendor/bin/nqnfcinfo': No such file or directory
[ 7.046234] init: starting service 'cnss-daemon'...
[ 7.047486] init: Created socket '/dev/socket/statsdw', mode 222, user 1066, group 1066
[ 7.050533] init: Failed to open file '/d/mmc0/mmc0:0001/ext_csd': No such file or directory
[ 7.057520] init: Could not start service 'ssgqmigd' as part of class 'late_start': Cannot find '/vendor/bin/ssgqmigd': No such file or directory
[ 7.057534] init: Could not start service 'ssgtzd' as part of class 'late_start': Cannot find '/vendor/bin/ssgtzd': No such file or directory
[ 7.057780] init: starting service 'mlid'...
[ 7.058698] init: starting service 'loc_launcher'...
[ 7.060484] 'opened /dev/cdsprpc-smd c 225 3'
[ 7.092740] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[ 7.094718] BQ: bq27541_battery_soc: bq27541_battery_soc = 92
[ 7.094749] SMBLIB: load_data: stored_soc[0xb8], shutdown_soc[92]
[ 7.094750] BQ: fg_soc_calibrate: soc=92, soc_load=92
[ 7.195167] QSEECOM: qseecom_load_app: App (dhsecapp) does'nt exist, loading apps for first time
[ 7.248021] Process lowi-server granted CAP_NET_ADMIN from Android group net_admin.
[ 7.248024] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
[ 7.248025] Implicit grants are deprecated and will be removed in the future.
[ 7.272947] QSEECOM: qseecom_load_app: App with id 3 (dhsecapp) now loaded
[ 7.293629] QSEECOM: qseecom_load_app: App (haventkn) does'nt exist, loading apps for first time
[ 7.336273] QSEECOM: qseecom_load_app: App with id 4 (haventkn) now loaded
[ 7.517905] msm-dsi-panel:[dsi_panel_set_backlight:724] ---backlight level = 1023---
[ 7.572150] init: oem_property_main
[ 7.579708] logd.daemon: reinit
[ 7.599803] set_dload_mode ON
[ 8.160091] BQ: bq27411_modify_soc_smooth_parameter: bq27411_modify_soc_smooth_parameter begin
[ 8.258146] BQ: unseal: bq27541 : i=1,bq27541_di->device_type=1
[ 8.314152] BQ: bq27411_enable_config_mode: bq27411_enable_config_mode success i = 1, config_mode = 0x119, enable = 1
[ 8.318821] healthd: battery l=92 v=4151 t=26.7 h=2 st=3 c=-881 fc=2878000 cc=0 chg=
[ 8.319239] healthd: battery l=92 v=4151 t=26.7 h=2 st=3 c=-881 fc=2878000 cc=0 chg=
[ 8.331702] healthd: battery l=92 v=4151 t=26.7 h=2 st=3 c=-881 fc=2878000 cc=0 chg=
[ 8.332698] healthd: battery l=92 v=4151 t=26.7 h=2 st=3 c=-881 fc=2878000 cc=0 chg=
[ 8.351348] BQ: bq27411_write_block_data_cmd: bq27411 write blk_id = 0x6b, addr = 0x42, old_val = 0x71, new_val = 0x11, old_csum = 0xfd, new_csum = 0x5d
[ 8.368821] healthd: battery l=92 v=4151 t=26.7 h=2 st=3 c=-881 fc=2878000 cc=0 chg=
[ 8.372175] healthd: battery l=92 v=4151 t=26.7 h=2 st=3 c=-881 fc=2878000 cc=0 chg=
[ 8.377239] BQ: bq27411_write_block_data_cmd: bq27411 write blk_id = 0x40, addr = 0x42, old_val = 0xf, new_val = 0x7, old_csum = 0x1, new_csum = 0x9
[ 8.508284] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[ 8.559703] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[ 8.561429] ipa-wan ipa3_ssr_notifier_cb:2747 ipa3_ssr_notifier_cb:2747 IPA received MPSS AFTER_POWERUP
[ 8.561437] ipa-wan ipa3_ssr_notifier_cb:2752 IPA AFTER_POWERUP handling is complete
[ 8.561702] apr_tal_link_state_cb: edge[mpss] link state[0]
[ 8.561928] FASTCHG: dashchg_fw_check: result=success
[ 8.561931] FASTCHG: reset_mcu_and_request_irq:
[ 8.562655] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [mpss_IPCRTR]
[ 8.565425] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs1!
[ 8.565566] service-notifier: root_service_service_arrive: Connection established between QMI handle and 180 service
[ 8.567542] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
[ 8.567624] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs2!
[ 8.568125] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsg!
[ 8.568754] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsc!
[ 8.572229] rmt_storage:INFO:rmt_storage_alloc_buff_cb: Received req_size: 0! avail: 2097152
[ 8.572943] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /oem/nvbk/static
[ 8.573091] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=0, size=512]for /oem/nvbk/static!
[ 8.574093] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /oem/nvbk/static!
[ 8.588387] FASTCHG: dashchg_fw_update: FW check success
[ 8.879759] ipa-wan ipa3_handle_indication_req:152 not send indication
[ 8.879922] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
[ 8.884621] ipa ipa3_uc_wdi_event_log_info_handler:364 WDI stats ofst=0x47130
[ 8.884635] ipa ipa3_uc_ntn_event_log_info_handler:39 NTN feature missing 0x9
[ 8.887793] QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received
[ 8.920443] IPC_RTR: process_new_server_msg: Server 00001002 create rejected, version = 0
[ 8.930958] BQ: bq27411_enable_config_mode: bq27411_enable_config_mode success i = 21, config_mode = 0x109, enable = 0
[ 8.943647] BQ: bq27411_modify_soc_smooth_parameter: bq27411_modify_soc_smooth_parameter end
[ 9.417404] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[ 9.569247] service-notifier: root_service_service_ind_cb: Indication received from msm/modem/wlan_pd, state: 0x1fffffff, trans-id: 1
[ 9.569518] service-notifier: send_ind_ack: Indication ACKed for transid 1, service msm/modem/wlan_pd, instance 180!
[ 9.571477] icnss: QMI Server Connected: state: 0x981
[ 9.629128] IPC_RTR: process_new_server_msg: Server 00001003 create rejected, version = 0
[ 9.930529] ip_local_port_range: prefer different parity for start/end values.
[ 10.214098] ipa ipa3_assign_policy:2879 get close-by 8192
[ 10.214105] ipa ipa3_assign_policy:2885 set rx_buff_sz 7680
[ 10.214108] ipa ipa3_assign_policy:2907 set aggr_limit 6
[ 10.215878] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data0) register to IPA
[ 10.299959] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data1) register to IPA
[ 10.387389] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data2) register to IPA
[ 10.486823] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data3) register to IPA
[ 10.575807] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data4) register to IPA
[ 10.611567] synaptics,s3320: key_disable_write_func key_back:0 key_appselect:0
[ 10.698680] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data5) register to IPA
[ 10.787044] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data6) register to IPA
[ 10.864432] acc_open
[ 10.864437] acc_release
[ 10.884653] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data7) register to IPA
[ 10.912456] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data8) register to IPA
[ 10.922924] gf_spi: Found
[ 10.922927] gf_spi: Succeed to open device. irq = 373
[ 10.922932] gf_spi: Sensor has already powered-on.
[ 10.922934] gf_spi: gf_ioctl GF_IOC_RESET.
[ 10.937716] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data9) register to IPA
[ 10.940863] QSEECOM: qseecom_load_app: App (gfp5288) does'nt exist, loading apps for first time
[ 10.983073] ipa-wan ipa3_wwan_ioctl:1715 dev(rmnet_data10) register to IPA
[ 11.060797] QSEECOM: qseecom_load_app: App with id 5 (gfp5288) now loaded
[ 11.099569] synaptics,s3320: tp_gesture_write_func write argc1[0xdf],argc2[0x0]
[ 11.137048] synaptics,s3320: key_disable_write_func key_back:0 key_appselect:0
[ 11.144396] Wifi Turning On from UI
[ 11.144400] wlan: Loading driver v5.1.1.71H ()
[ 11.147633] wlan: driver loaded
[ 11.150306] healthd: battery l=92 v=4151 t=26.7 h=2 st=3 c=-881 fc=2878000 cc=0 chg=
[ 11.152689] healthd: battery l=92 v=4151 t=26.7 h=2 st=3 c=-881 fc=2878000 cc=0 chg=
[ 11.165748] gf_spi: IRQ has been enabled.
[ 11.165752] gf_spi: vendor_id : 0x0
[ 11.165753] gf_spi: mode : 0xe8
[ 11.165753] gf_spi: operation: 0x37
[ 11.688602] sdcardfs version 2.0
[ 11.688608] sdcardfs: dev_name -> /data/media
[ 11.688609] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
[ 11.688613] sdcardfs: mnt -> 0000000000000000
[ 11.688652] sdcardfs: mounted on top of /data/media type ext4
[ 11.689012] Remount options were mask=23,gid=9997 for vfsmnt 0000000000000000.
[ 11.689019] sdcardfs : options - debug:1
[ 11.689021] sdcardfs : options - gid:9997
[ 11.689022] sdcardfs : options - mask:23
[ 11.689099] Remount options were mask=7,gid=9997 for vfsmnt 0000000000000000.
[ 11.689102] sdcardfs : options - debug:1
[ 11.689104] sdcardfs : options - gid:9997
[ 11.689105] sdcardfs : options - mask:7
[ 11.863573] msm-dsi-panel:[dsi_panel_set_srgb_mode:4354] sRGB Mode Off.
[ 11.863841] Real Send DCI-P3 off command
[ 11.864034] msm-dsi-panel:[dsi_panel_set_dci_p3_mode:4380] DCI-P3 Mode Off.
[ 11.864179] Real Send Night mode off command
[ 11.864504] msm-dsi-panel:[dsi_panel_set_night_mode:4407] night Mode Off.
[ 11.864899] msm-dsi-panel:[dsi_panel_set_adaption_mode:4479] adaption Mode Off.
[ 11.898007] subsys-restart: __subsystem_get(): Changing subsys fw_name to venus
[ 11.904159] subsys-pil-tz aae0000.qcom,venus: venus: loading from 0x0000000095800000 to 0x0000000095d00000
[ 11.950421] subsys-pil-tz aae0000.qcom,venus: venus: Brought out of reset
[ 12.041924] binder: unexpected work type, 4, not freed
[ 12.405107] init: processing action (sys.training=0) from (/system/etc/init/caffed.rc:6)
[ 12.546509] init: processing action (vendor.ims.DATA_DAEMON_STATUS=1) from (/vendor/etc/init/hw/init.target.rc:446)
[ 12.547622] init: starting service 'vendor.ims_rtp_daemon'...
[ 12.557114] init: Received control message 'stop' for 'vendor.imsrcsservice' from pid: 1166 (/system/vendor/bin/imsdatadaemon)
[ 12.557135] init: Sending signal 9 to service 'vendor.imsrcsservice' (pid 906) process group...
[ 12.567869] libprocessgroup: Successfully killed process cgroup uid 1000 pid 906 in 10ms
[ 12.569344] init: Service 'vendor.imsrcsservice' (pid 906) received signal 9
[ 12.572153] init: Received control message 'start' for 'vendor.imsrcsservice' from pid: 1166 (/system/vendor/bin/imsdatadaemon)
[ 12.572724] init: starting service 'vendor.imsrcsservice'...
[ 12.697205] HTB: quantum of class 10001 is big. Consider r2q change.
[ 12.723222] HTB: quantum of class 10010 is big. Consider r2q change.
[ 12.742839] icnss: WLAN FW is ready: 0xd87
[ 12.742942] qcom,rpmh-regulator soc:rpmh-regulator-ldoa7: TCS Busy, retrying RPMH message send
[ 12.744349] wlan: probing driver v5.1.1.71H
[ 12.744358] ipa ipa3_uc_reg_rdyCB:1774 bad parm. inout= (null)
[ 12.745410] ueventd: firmware: loading 'wlan/qca_cld/WCNSS_qcom_cfg.ini' for '/devices/platform/soc/18800000.qcom,icnss/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini'
[ 12.747151] ueventd: loading /devices/platform/soc/18800000.qcom,icnss/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini took 1ms
[ 12.748138] ipa ipa3_uc_reg_rdyCB:1774 bad parm. inout= (null)
[ 12.748469] ipa ipa3_uc_reg_rdyCB:1774 bad parm. inout= (null)
[ 12.797093] IPC_RTR: process_new_server_msg: Server 00001003 create rejected, version = 0
[ 12.863477] cnss_utils: WLAN MAC address is not set, type 0
[ 12.864380] ueventd: firmware: loading 'wlan/qca_cld/wlan_mac.bin' for '/devices/platform/soc/18800000.qcom,icnss/firmware/wlan!qca_cld!wlan_mac.bin'
[ 12.864857] ueventd: loading /devices/platform/soc/18800000.qcom,icnss/firmware/wlan!qca_cld!wlan_mac.bin took 0ms
[ 12.874900] init: Received control message 'start' for 'wpa_supplicant' from pid: 924 (/system/bin/wificond)
[ 13.007797] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.014414] Process lowi-server granted CAP_NET_ADMIN from Android group net_admin.
[ 13.014418] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
[ 13.014419] Implicit grants are deprecated and will be removed in the future.
[ 13.014498] Process lowi-server granted CAP_NET_ADMIN from Android group net_admin.
[ 13.014499] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
[ 13.014500] Implicit grants are deprecated and will be removed in the future.
[ 13.014599] Process lowi-server granted CAP_NET_ADMIN from Android group net_admin.
[ 13.014601] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
[ 13.014602] Implicit grants are deprecated and will be removed in the future.
[ 13.732925] HTB: quantum of class 10010 is big. Consider r2q change.
[ 13.804579] HTB: quantum of class 10010 is big. Consider r2q change.
[ 14.079246] HTB: quantum of class 10001 is big. Consider r2q change.
[ 14.101667] HTB: quantum of class 10010 is big. Consider r2q change.
[ 14.268641] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister v4-rmnet_data1
[ 14.313558] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister v4-rmnet_data1
[ 15.925229] HTB: quantum of class 10001 is big. Consider r2q change.
[ 15.940490] HTB: quantum of class 10010 is big. Consider r2q change.
[ 17.594250] init: Received control message 'stop' for 'vendor.imsrcsservice' from pid: 2316 (/system/vendor/bin/imsrcsd)
[ 17.594267] init: Sending signal 9 to service 'vendor.imsrcsservice' (pid 2316) process group...
[ 17.599513] libprocessgroup: Successfully killed process cgroup uid 1000 pid 2316 in 5ms
[ 17.600811] init: Service 'vendor.imsrcsservice' (pid 2316) received signal 9
[ 18.037597] init: Service 'bootanim' (pid 884) exited with status 0
[ 18.162082] init: processing action (sys.boot_completed=1) from (/init.rc:765)
[ 18.162153] init: processing action (sys.boot_completed=1) from (/init.rc:894)
[ 18.162192] init: starting service 'AJ3Px1g'...
[ 18.163022] init: processing action (sys.boot_completed=1) from (/init.usb.rc:115)
[ 18.163462] init: processing action (sys.boot_completed=1) from (/init.performance_profiles.rc:1)
[ 18.163778] Boot completed
[ 18.168701] Core dump to |/system/bin/coredump.sh 2671 0 1558279291 pipe failed
[ 18.370088] /vendor/bin/init.qcom.post_boot.sh[78]: can't create /sys/devices/system/cpu/cpu0/cpufreq/schedutil/rate_limit_us: Permission denied
[ 18.370295] /vendor/bin/init.qcom.post_boot.sh[85]: can't create /sys/devices/system/cpu/cpu4/cpufreq/schedutil/rate_limit_us: Permission denied
[ 18.370553] /vendor/bin/init.qcom.post_boot.sh[97]: can't create /sys/module/lowmemorykiller/parameters/oom_reaper: Permission denied
[ 18.382668] /vendor/bin/init.qcom.post_boot.sh[164]: can't create /sys/module/lpm_levels/L3/cpu0/ret/idle_enabled: No such file or directory
[ 18.382695] /vendor/bin/init.qcom.post_boot.sh[165]: can't create /sys/module/lpm_levels/L3/cpu1/ret/idle_enabled: No such file or directory
[ 18.382710] /vendor/bin/init.qcom.post_boot.sh[166]: can't create /sys/module/lpm_levels/L3/cpu2/ret/idle_enabled: No such file or directory
[ 18.382725] /vendor/bin/init.qcom.post_boot.sh[167]: can't create /sys/module/lpm_levels/L3/cpu3/ret/idle_enabled: No such file or directory
[ 18.382738] /vendor/bin/init.qcom.post_boot.sh[168]: can't create /sys/module/lpm_levels/L3/cpu4/ret/idle_enabled: No such file or directory
[ 18.382753] /vendor/bin/init.qcom.post_boot.sh[169]: can't create /sys/module/lpm_levels/L3/cpu5/ret/idle_enabled: No such file or directory
[ 18.382766] /vendor/bin/init.qcom.post_boot.sh[170]: can't create /sys/module/lpm_levels/L3/cpu6/ret/idle_enabled: No such file or directory
[ 18.401418] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 18.514313] init.qcom.post_: 2 output lines suppressed due to ratelimiting
[ 18.924236] synaptics,s3320: start get base data:1
[ 19.080309] synaptics,s3320: set_doze_time: set doze time: 1
[ 19.081257] synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x67 !
[ 20.454820] Process lowi-server granted CAP_NET_ADMIN from Android group net_admin.
[ 20.454831] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
[ 20.454833] Implicit grants are deprecated and will be removed in the future.
[ 22.612081] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/init.rc:782)
[ 23.091290] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)\x0a
[ 23.094371] init: Async property child exited with status 0
[ 23.097979] selinux: SELinux: Skipping restorecon_recursive(/data/misc_ce/0)\x0a
[ 23.098713] init: Async property child exited with status 0
[ 23.533941] init: processing action (vold.internalSD.startcopy=1) from (OP_ACTION_INDEX:35)
[ 23.534129] init: starting service 'filebuilderd'...
[ 23.546598] filebuilderd: run /system/bin/filebuilderd ENGINE START!
[ 23.546747] filebuilderd: Finish traveling /data/media/ folder, 0 files (0KB) copied, travel 0 folder, elapse 0 msec
[ 23.546759] filebuilderd: Start checking folder...
[ 23.546878] filebuilderd: Finish check /data/media/0/ folder, elapse 0 msec, ret = 0
[ 23.548593] init: Service 'filebuilderd' (pid 2824) exited with status 0
[ 23.773912] CPU5: update max cpu_capacity 967
[ 24.137390] pn544_dev_ioctl :enter cmd = 1074063617, arg = 0
[ 24.137393] p61_access_lock: Enter
[ 24.137394] p61_access_lock: Exit
[ 24.137395] pn544_dev_ioctl power off
[ 24.137396] p61_update_access_state: Enter current_state = 100
[ 24.137397] p61_update_access_state: Exit current_state = 100
[ 24.137403] p61_access_unlock: Enter
[ 24.137404] p61_access_unlock: Exit
[ 24.137405] pn544_dev_ioctl :exit cmd = 1074063617, arg = 0
[ 24.147495] pn544_dev_ioctl :enter cmd = 1074063617, arg = 1
[ 24.147497] p61_access_lock: Enter
[ 24.147499] p61_access_lock: Exit
[ 24.147500] pn544_dev_ioctl power on
[ 24.147501] p61_update_access_state: Enter current_state = 100
[ 24.147502] p61_update_access_state: Exit current_state = 100
[ 24.147508] p61_access_unlock: Enter
[ 24.147509] p61_access_unlock: Exit
[ 24.147510] pn544_dev_ioctl :exit cmd = 1074063617, arg = 1
[ 24.149618] i2c_geni 88c000.i2c: i2c error :-107
[ 24.149631] pn544_dev_write : i2c_master_send returned -107
[ 24.206971] pn544_dev_ioctl :enter cmd = 1074063623, arg = 2
[ 24.206974] p61_access_lock: Enter
[ 24.206976] p61_access_lock: Exit
[ 24.206977] pn544_dev_ioctl : The power scheme is set to PN80T_LEGACY_PWR_SCHEME,
[ 24.206977] p61_access_unlock: Enter
[ 24.206978] p61_access_unlock: Exit
[ 24.206979] pn544_dev_ioctl :exit cmd = 1074063623, arg = 2
[ 25.225150] pn544_dev_ioctl :enter cmd = 1074063621, arg = 2844
[ 25.225153] set_nfc_pid : The NFC Service PID is 2844
[ 25.247046] pn544_dev_ioctl :enter cmd = 2147805443, arg = 549051441924
[ 25.247049] p61_access_lock: Enter
[ 25.247051] p61_access_lock: Exit
[ 25.247052] pn544_dev_ioctl: P61_GET_PWR_STATUS = 100
[ 25.247053] p61_access_unlock: Enter
[ 25.247054] p61_access_unlock: Exit
[ 25.247055] pn544_dev_ioctl :exit cmd = 2147805443, arg = 549051441924
[ 25.251505] pn544_dev_ioctl :enter cmd = 1074063621, arg = 2844
[ 25.251509] set_nfc_pid : The NFC Service PID is 2844
[ 25.253412] rdc_check_valid: rdc=0 invalid, [241833636, 403056239]
[ 25.254569] max989xx_calib_get get calib_value 307581421
[ 25.254572] max98927_stream_mute: ref_RDC left =307581421
[ 25.296998] pn544_dev_ioctl :enter cmd = 1074063621, arg = 2844
[ 25.297001] set_nfc_pid : The NFC Service PID is 2844
[ 28.664152] CPU6: update max cpu_capacity 1024
[ 33.864969] pn544_dev_ioctl :enter cmd = 1074063618, arg = 1
[ 33.864981] p61_access_lock: Enter
[ 33.864985] p61_access_lock: Exit
[ 33.864989] pn544_dev_ioctl : PN61_SET_SPI_PWR - power on ese
[ 33.864993] p61_update_access_state: Enter current_state = 100
[ 33.864995] p61_update_access_state: Exit current_state = 400
[ 33.864998] nfc service pid pn544_dev_ioctl ---- 2844
[ 33.865004] signal_handler: Enter
[ 33.865010] com.android.nfc.
[ 33.865094] signal_handler: Exit ret = 0
[ 33.867205] i2c_geni 88c000.i2c: i2c error :-107
[ 33.867229] pn544_dev_write : i2c_master_send returned -107
[ 33.891837] pn544_dev_ioctl :enter cmd = 1074063626, arg = -16
[ 33.891845] release_dwpOnOff_wait: Enter
[ 33.891984] Dwp On/off wait protection: Timeout
[ 33.891987] Dwp On/Off wait protection : released
[ 33.904033] p61_access_unlock: Enter
[ 33.904041] p61_access_unlock: Exit
[ 33.904045] pn544_dev_ioctl :exit cmd = 1074063618, arg = 1
[ 33.905739] spi_geni 880000.spi: tx_fifo 16 rx_fifo 16 tx_width 32
[ 34.035236] pn544_dev_ioctl :enter cmd = 1074063618, arg = 0
[ 34.035248] p61_access_lock: Enter
[ 34.035253] p61_access_lock: Exit
[ 34.035257] pn544_dev_ioctl : PN61_SET_SPI_PWR - power off ese
[ 34.035263] p61_update_access_state: Enter current_state = 400
[ 34.035265] p61_update_access_state: Exit current_state = 100
[ 34.035270] nfc service pid pn544_dev_ioctl ---- 2844
[ 34.035275] svdd_sync_onoff: Enter nfc_service_pid: 2844
[ 34.035279] signal_handler: Enter
[ 34.035283] com.android.nfc.
[ 34.035344] signal_handler: Exit ret = 0
[ 34.035346] Waiting for svdd protection response
[ 34.046598] pn544_dev_ioctl :enter cmd = 1074063624, arg = -16
[ 34.046605] release_svdd_wait: Enter
[ 34.046653] release_svdd_wait: Exit
[ 34.057021] svdd wait protection : released
[ 34.057029] svdd_sync_onoff: Exit
[ 34.060258] svdd_sync_onoff: Enter nfc_service_pid: 2844
[ 34.060264] signal_handler: Enter
[ 34.060268] com.android.nfc.
[ 34.060330] signal_handler: Exit ret = 0
[ 34.060334] Waiting for svdd protection response
[ 34.075170] pn544_dev_ioctl :enter cmd = 1074063624, arg = -16
[ 34.075177] release_svdd_wait: Enter
[ 34.075261] release_svdd_wait: Exit
[ 34.086860] svdd wait protection : released
[ 34.086866] svdd_sync_onoff: Exit
[ 34.086872] p61_access_unlock: Enter
[ 34.086875] p61_access_unlock: Exit
[ 34.086885] pn544_dev_ioctl :exit cmd = 1074063618, arg = 0
[ 34.088518] pn544_dev_ioctl :enter cmd = 1074063618, arg = 0
[ 34.088523] p61_access_lock: Enter
[ 34.088526] p61_access_lock: Exit
[ 34.088531] pn544_dev_ioctl : PN61_SET_SPI_PWR - power off ese
[ 34.088535] pn544_dev_ioctl : PN61_SET_SPI_PWR - failed, current_state = 100
[ 34.088573] p61_access_unlock: Enter
[ 34.088577] p61_access_unlock: Exit
[ 35.103381] HTB: quantum of class 10010 is big. Consider r2q change.
[ 35.199417] HTB: quantum of class 10010 is big. Consider r2q change.
[ 35.276250] HTB: quantum of class 10010 is big. Consider r2q change.
[ 35.358198] HTB: quantum of class 10010 is big. Consider r2q change.
[ 35.428404] HTB: quantum of class 10010 is big. Consider r2q change.
[ 35.521990] HTB: quantum of class 10010 is big. Consider r2q change.
[ 36.388330] HTB: quantum of class 10010 is big. Consider r2q change.
[ 36.481630] HTB: quantum of class 10010 is big. Consider r2q change.
[ 36.555046] HTB: quantum of class 10010 is big. Consider r2q change.
[ 36.632700] HTB: quantum of class 10010 is big. Consider r2q change.
[ 36.711612] HTB: quantum of class 10010 is big. Consider r2q change.
[ 36.788563] HTB: quantum of class 10010 is big. Consider r2q change.
[ 41.160159] IRQ6 no longer affine to CPU4
[ 41.237595] init: Untracked pid 4912 exited with status 0
[ 41.380509] logd: logdr: UID=10016 GID=10016 PID=2716 n tail=0 logMask=4 pid=0 start=0ns timeout=0ns
[ 41.730207] init: Received control message 'start' for 'mdnsd' from pid: 620 (/system/bin/netd)
[ 41.730892] init: starting service 'mdnsd'...
[ 41.737416] init: Created socket '/dev/socket/mdnsd', mode 660, user 1020, group 3003
[ 41.940150] IRQ6 no longer affine to CPU4
[ 42.232181] logd: logdr: UID=10016 GID=10016 PID=2429 n tail=0 logMask=4 pid=0 start=0ns timeout=0ns
[ 42.257034] logd: logdr: UID=10016 GID=10016 PID=2429 n tail=0 logMask=4 pid=0 start=1558279314861000000ns timeout=1558286515441327047ns
[ 43.968382] logd: logdr: UID=10016 GID=10016 PID=2716 n tail=0 logMask=4 pid=0 start=0ns timeout=0ns
[ 47.713369] CPU6: update max cpu_capacity 967
[ 47.741316] init: Untracked pid 5576 exited with status 0
[ 53.304984] init: Received control message 'start' for 'bootanim' from pid: 726 (/system/bin/surfaceflinger)
[ 53.305395] init: starting service 'bootanim'...
[ 53.345664] init: Service 'zygote' (pid 621) received signal 9
[ 53.345693] init: Sending signal 9 to service 'zygote' (pid 621) process group...
[ 53.382744] libprocessgroup: Successfully killed process cgroup uid 0 pid 621 in 36ms
[ 53.384056] init: Command 'write /sys/power/state on' action=onrestart (<Service 'zygote' onrestart>:2) took 0ms and failed: Unable to write to file '/sys/power/state': Unable to write file contents: Invalid argument
[ 53.384164] init: Sending signal 9 to service 'audioserver' (pid 724) process group...
[ 53.457616] libprocessgroup: Successfully killed process cgroup uid 1041 pid 724 in 73ms
[ 53.457863] init: Command 'restart audioserver' action=onrestart (<Service 'zygote' onrestart>:3) took 73ms and succeeded
[ 53.457901] init: Sending signal 9 to service 'cameraserver' (pid 908) process group...
[ 53.603415] qtaguid: tag_stat: stat_update() p2p0 not found
[ 53.912751] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 53.920373] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff
[ 53.921456] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
[ 53.921699] max98927_info_rivision_ctl
[ 53.921737] max98927_info_rivision_ctl
[ 53.921773] max98927_get_rivision_ctl
[ 53.921980] max98927_digital_gain_get: spk_gain setting returned 0
[ 53.926198] max98927_mono_out_get_l: value:128
[ 53.926408] max98927_mono_out_get_r: value:0
[ 53.927002] max98927_left_channel_enable_get: value:0
[ 53.927107] max98927_right_channel_enable_get: value:0
[ 53.945795] i2c_geni 88c000.i2c: i2c error :-107
[ 53.945812] pn544_dev_write : i2c_master_send returned -107
[ 53.978461] pn544_dev_ioctl :enter cmd = 1074063617, arg = 0
[ 53.978466] p61_access_lock: Enter
[ 53.978468] p61_access_lock: Exit
[ 53.978470] pn544_dev_ioctl power off
[ 53.978471] p61_update_access_state: Enter current_state = 100
[ 53.978473] p61_update_access_state: Exit current_state = 100
[ 53.978486] p61_access_unlock: Enter
[ 53.978487] p61_access_unlock: Exit
[ 53.978489] pn544_dev_ioctl :exit cmd = 1074063617, arg = 0
[ 54.237835] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 54.246087] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff
[ 54.246628] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
[ 54.246909] max98927_info_rivision_ctl
[ 54.246946] max98927_info_rivision_ctl
[ 54.246977] max98927_get_rivision_ctl
[ 54.247160] max98927_digital_gain_get: spk_gain setting returned 0
[ 54.250947] max98927_mono_out_get_l: value:128
[ 54.251128] max98927_mono_out_get_r: value:0
[ 54.251633] max98927_left_channel_enable_get: value:0
[ 54.251725] max98927_right_channel_enable_get: value:0
[ 54.420299] IRQ6 no longer affine to CPU5
[ 54.503500] qtaguid: tag_stat: stat_update() p2p0 not found
[ 54.952211] HTB: quantum of class 10010 is big. Consider r2q change.
[ 55.010358] HTB: quantum of class 10010 is big. Consider r2q change.
[ 55.066193] HTB: quantum of class 10010 is big. Consider r2q change.
[ 55.448408] healthd: battery l=92 v=4110 t=27.9 h=2 st=3 c=-913 fc=2878000 cc=0 chg=
[ 55.449931] healthd: battery l=92 v=4110 t=27.9 h=2 st=3 c=-913 fc=2878000 cc=0 chg=
[ 55.465795] healthd: battery l=92 v=4110 t=27.9 h=2 st=3 c=-913 fc=2878000 cc=0 chg=
[ 55.471085] healthd: battery l=92 v=4110 t=27.9 h=2 st=3 c=-913 fc=2878000 cc=0 chg=
[ 55.472510] healthd: battery l=92 v=4110 t=27.9 h=2 st=3 c=-913 fc=2878000 cc=0 chg=
[ 58.690290] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/init.rc:778)
[ 58.698358] synaptics,s3320: key_disable_write_func key_back:0 key_appselect:0
[ 58.998174] acc_open
[ 58.998180] acc_release
[ 59.411024] synaptics,s3320: tp_gesture_write_func write argc1[0xdf],argc2[0x0]
[ 59.413740] init: processing action (wlan.driver.status=ok) from (/vendor/etc/init/hw/init.target.rc:176)
[ 59.414164] Wifi Turning On from UI
[ 59.414341] init: processing action (wlan.driver.status=ok) from (OP_ACTION_INDEX:31)
[ 59.438815] synaptics,s3320: key_disable_write_func key_back:0 key_appselect:0
[ 59.457111] healthd: battery l=92 v=4110 t=27.9 h=2 st=3 c=-913 fc=2878000 cc=0 chg=
[ 59.468178] healthd: battery l=92 v=4110 t=27.9 h=2 st=3 c=-913 fc=2878000 cc=0 chg=
[ 59.527014] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 59.807446] msm-dsi-panel:[dsi_panel_set_srgb_mode:4354] sRGB Mode Off.
[ 59.807823] Real Send DCI-P3 off command
[ 59.821969] msm-dsi-panel:[dsi_panel_set_dci_p3_mode:4380] DCI-P3 Mode Off.
[ 59.822711] Real Send Night mode off command
[ 59.824028] msm-dsi-panel:[dsi_panel_set_night_mode:4407] night Mode Off.
[ 59.838983] msm-dsi-panel:[dsi_panel_set_adaption_mode:4479] adaption Mode Off.
[ 59.949082] sdcardfs version 2.0
[ 59.949088] sdcardfs: dev_name -> /data/media
[ 59.949090] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
[ 59.949093] sdcardfs: mnt -> 0000000000000000
[ 59.949121] sdcardfs: mounted on top of /data/media type ext4
[ 59.949346] Remount options were mask=23,gid=9997 for vfsmnt 0000000000000000.
[ 59.949351] sdcardfs : options - debug:1
[ 59.949353] sdcardfs : options - gid:9997
[ 59.949354] sdcardfs : options - mask:23
[ 59.949475] Remount options were mask=7,gid=9997 for vfsmnt 0000000000000000.
[ 59.949478] sdcardfs : options - debug:1
[ 59.949480] sdcardfs : options - gid:9997
[ 59.949481] sdcardfs : options - mask:7
[ 60.152762] init: processing action (sys.training=0) from (/system/etc/init/caffed.rc:6)
[ 61.811785] init: processing action (persist.sys.gamemode.wifiboost=0) from (/init.rc:863)
[ 61.812002] init: starting service 'networkboost_disable'...
[ 61.817587] init: Service 'networkboost_disable' (pid 6712) exited with status 0
[ 61.940527] IRQ6 no longer affine to CPU5
[ 66.280737] init: Service 'bootanim' (pid 5666) exited with status 0
[ 66.413032] init: processing action (sys.boot_completed=1) from (/init.rc:765)
[ 66.413282] init: processing action (sys.boot_completed=1) from (/init.rc:894)
[ 66.413335] init: starting service 'AJ3Px1g'...
[ 66.418045] init: processing action (sys.boot_completed=1) from (/init.usb.rc:115)
[ 66.419064] init: processing action (sys.boot_completed=1) from (/init.performance_profiles.rc:1)
[ 66.419187] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.qcom.rc:543)
[ 66.420122] Boot completed
[ 66.422221] HTB: quantum of class 10010 is big. Consider r2q change.
[ 66.429729] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.qcom.rc:1008)
[ 66.430736] init: starting service 'qcom-post-boot'...
[ 66.434654] init: starting service 'qti-testscripts'...
[ 66.442243] Core dump to |/system/bin/coredump.sh 6759 0 1558279339 pipe failed
[ 66.563302] /vendor/bin/init.qcom.post_boot.sh[78]: can't create /sys/devices/system/cpu/cpu0/cpufreq/schedutil/rate_limit_us: Permission denied
[ 66.563450] /vendor/bin/init.qcom.post_boot.sh[85]: can't create /sys/devices/system/cpu/cpu4/cpufreq/schedutil/rate_limit_us: Permission denied
[ 66.563686] /vendor/bin/init.qcom.post_boot.sh[97]: can't create /sys/module/lowmemorykiller/parameters/oom_reaper: Permission denied
[ 66.564331] CPU6: update max cpu_capacity 1024
[ 66.580188] IRQ6 no longer affine to CPU6
[ 66.601925] /vendor/bin/init.qcom.post_boot.sh[164]: can't create /sys/module/lpm_levels/L3/cpu0/ret/idle_enabled: No such file or directory
[ 66.601985] /vendor/bin/init.qcom.post_boot.sh[165]: can't create /sys/module/lpm_levels/L3/cpu1/ret/idle_enabled: No such file or directory
[ 66.602030] /vendor/bin/init.qcom.post_boot.sh[166]: can't create /sys/module/lpm_levels/L3/cpu2/ret/idle_enabled: No such file or directory
[ 66.602075] /vendor/bin/init.qcom.post_boot.sh[167]: can't create /sys/module/lpm_levels/L3/cpu3/ret/idle_enabled: No such file or directory
[ 66.602119] /vendor/bin/init.qcom.post_boot.sh[168]: can't create /sys/module/lpm_levels/L3/cpu4/ret/idle_enabled: No such file or directory
[ 66.602163] /vendor/bin/init.qcom.post_boot.sh[169]: can't create /sys/module/lpm_levels/L3/cpu5/ret/idle_enabled: No such file or directory
[ 66.602206] /vendor/bin/init.qcom.post_boot.sh[170]: can't create /sys/module/lpm_levels/L3/cpu6/ret/idle_enabled: No such file or directory
[ 66.743986] init.qcom.post_: 2 output lines suppressed due to ratelimiting
[ 69.022936] HTB: quantum of class 10001 is big. Consider r2q change.
[ 69.065049] HTB: quantum of class 10010 is big. Consider r2q change.
[ 69.208040] htb: prio qdisc 10: is non-work-conserving?
[ 71.237120] CPU6: update max cpu_capacity 967
[ 71.578682] pn544_dev_ioctl :enter cmd = 1074063617, arg = 0
[ 71.578685] p61_access_lock: Enter
[ 71.578686] p61_access_lock: Exit
[ 71.578687] pn544_dev_ioctl power off
[ 71.578688] p61_update_access_state: Enter current_state = 100
[ 71.578689] p61_update_access_state: Exit current_state = 100
[ 71.578696] p61_access_unlock: Enter
[ 71.578696] p61_access_unlock: Exit
[ 71.578697] pn544_dev_ioctl :exit cmd = 1074063617, arg = 0
[ 71.588808] pn544_dev_ioctl :enter cmd = 1074063617, arg = 1
[ 71.588811] p61_access_lock: Enter
[ 71.588812] p61_access_lock: Exit
[ 71.588813] pn544_dev_ioctl power on
[ 71.588814] p61_update_access_state: Enter current_state = 100
[ 71.588815] p61_update_access_state: Exit current_state = 100
[ 71.588821] p61_access_unlock: Enter
[ 71.588822] p61_access_unlock: Exit
[ 71.588823] pn544_dev_ioctl :exit cmd = 1074063617, arg = 1
[ 71.591460] i2c_geni 88c000.i2c: i2c error :-107
[ 71.591477] pn544_dev_write : i2c_master_send returned -107
[ 71.658084] pn544_dev_ioctl :enter cmd = 1074063623, arg = 2
[ 71.658087] p61_access_lock: Enter
[ 71.658088] p61_access_lock: Exit
[ 71.658089] pn544_dev_ioctl : The power scheme is set to PN80T_LEGACY_PWR_SCHEME,
[ 71.658090] p61_access_unlock: Enter
[ 71.658090] p61_access_unlock: Exit
[ 71.658091] pn544_dev_ioctl :exit cmd = 1074063623, arg = 2
[ 72.665961] pn544_dev_ioctl :enter cmd = 1074063621, arg = 6946
[ 72.665965] set_nfc_pid : The NFC Service PID is 6946
[ 72.704016] pn544_dev_ioctl :enter cmd = 2147805443, arg = 549051441924
[ 72.704021] p61_access_lock: Enter
[ 72.704022] p61_access_lock: Exit
[ 72.704024] pn544_dev_ioctl: P61_GET_PWR_STATUS = 100
[ 72.704026] p61_access_unlock: Enter
[ 72.704027] p61_access_unlock: Exit
[ 72.704029] pn544_dev_ioctl :exit cmd = 2147805443, arg = 549051441924
[ 72.708362] pn544_dev_ioctl :enter cmd = 1074063621, arg = 6946
[ 72.708368] set_nfc_pid : The NFC Service PID is 6946
[ 72.723732] pn544_dev_ioctl :enter cmd = 1074063621, arg = 6946
[ 72.723735] set_nfc_pid : The NFC Service PID is 6946
[ 74.113494] QSEECOM: qseecom_load_app: App (faceapp) does'nt exist, loading apps for first time
[ 74.161550] QSEECOM: qseecom_load_app: App with id 6 (faceapp) now loaded
[ 74.165422] QSEECOM: qseecom_unload_app: App id 6 now unloaded
[ 75.709093] Process lowi-server granted CAP_NET_ADMIN from Android group net_admin.
[ 75.709102] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
[ 75.709103] Implicit grants are deprecated and will be removed in the future.
[ 76.020399] IRQ6 no longer affine to CPU4
[ 77.471227] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/init.rc:782)
[ 77.680855] IRQ6 no longer affine to CPU4
[ 78.321860] HTB: quantum of class 10010 is big. Consider r2q change.
[ 78.440424] IRQ6 no longer affine to CPU6
[ 79.184245] HTB: quantum of class 10010 is big. Consider r2q change.
[ 81.325760] pn544_dev_ioctl :enter cmd = 1074063618, arg = 1
[ 81.325771] p61_access_lock: Enter
[ 81.325776] p61_access_lock: Exit
[ 81.325782] pn544_dev_ioctl : PN61_SET_SPI_PWR - power on ese
[ 81.325787] p61_update_access_state: Enter current_state = 100
[ 81.325791] p61_update_access_state: Exit current_state = 400
[ 81.325796] nfc service pid pn544_dev_ioctl ---- 6946
[ 81.325802] signal_handler: Enter
[ 81.325808] com.android.nfc.
[ 81.325901] signal_handler: Exit ret = 0
[ 81.328066] i2c_geni 88c000.i2c: i2c error :-107
[ 81.328091] pn544_dev_write : i2c_master_send returned -107
[ 81.347370] pn544_dev_ioctl :enter cmd = 1074063626, arg = -16
[ 81.347377] release_dwpOnOff_wait: Enter
[ 81.347460] Dwp On/off wait protection: Timeout
[ 81.347466] Dwp On/Off wait protection : released
[ 81.359535] p61_access_unlock: Enter
[ 81.359541] p61_access_unlock: Exit
[ 81.359548] pn544_dev_ioctl :exit cmd = 1074063618, arg = 1
[ 81.517366] pn544_dev_ioctl :enter cmd = 1074063618, arg = 0
[ 81.517377] p61_access_lock: Enter
[ 81.517383] p61_access_lock: Exit
[ 81.517389] pn544_dev_ioctl : PN61_SET_SPI_PWR - power off ese
[ 81.517395] p61_update_access_state: Enter current_state = 400
[ 81.517399] p61_update_access_state: Exit current_state = 100
[ 81.517404] nfc service pid pn544_dev_ioctl ---- 6946
[ 81.517410] svdd_sync_onoff: Enter nfc_service_pid: 6946
[ 81.517416] signal_handler: Enter
[ 81.517424] com.android.nfc.
[ 81.517517] signal_handler: Exit ret = 0
[ 81.517520] Waiting for svdd protection response
[ 81.529469] pn544_dev_ioctl :enter cmd = 1074063624, arg = -16
[ 81.529476] release_svdd_wait: Enter
[ 81.529528] release_svdd_wait: Exit
[ 81.540507] svdd wait protection : released
[ 81.540514] svdd_sync_onoff: Exit
[ 81.543467] svdd_sync_onoff: Enter nfc_service_pid: 6946
[ 81.543472] signal_handler: Enter
[ 81.543477] com.android.nfc.
[ 81.543533] signal_handler: Exit ret = 0
[ 81.543537] Waiting for svdd protection response
[ 81.558342] pn544_dev_ioctl :enter cmd = 1074063624, arg = -16
[ 81.558345] release_svdd_wait: Enter
[ 81.558377] release_svdd_wait: Exit
[ 81.570279] svdd wait protection : released
[ 81.570286] svdd_sync_onoff: Exit
[ 81.570292] p61_access_unlock: Enter
[ 81.570295] p61_access_unlock: Exit
[ 81.570304] pn544_dev_ioctl :exit cmd = 1074063618, arg = 0
[ 81.570887] pn544_dev_ioctl :enter cmd = 1074063618, arg = 0
[ 81.570893] p61_access_lock: Enter
[ 81.570896] p61_access_lock: Exit
[ 81.570901] pn544_dev_ioctl : PN61_SET_SPI_PWR - power off ese
[ 81.570906] pn544_dev_ioctl : PN61_SET_SPI_PWR - failed, current_state = 100
[ 81.570926] p61_access_unlock: Enter
[ 81.570930] p61_access_unlock: Exit
[ 82.111753] HTB: quantum of class 10001 is big. Consider r2q change.
[ 82.142287] HTB: quantum of class 10010 is big. Consider r2q change.
[ 87.039254] healthd: battery l=92 v=4147 t=28.3 h=2 st=3 c=-863 fc=2878000 cc=0 chg=
[ 87.040243] healthd: battery l=92 v=4147 t=28.3 h=2 st=3 c=-863 fc=2878000 cc=0 chg=
[ 87.519925] init: Untracked pid 9107 exited with status 0
[ 87.731396] logd: logdr: UID=10016 GID=10016 PID=6862 n tail=0 logMask=4 pid=0 start=0ns timeout=0ns
[ 88.368726] logd: logdr: UID=10016 GID=10016 PID=6834 n tail=0 logMask=4 pid=0 start=0ns timeout=0ns
[ 88.404334] logd: logdr: UID=10016 GID=10016 PID=6834 n tail=0 logMask=4 pid=0 start=1558279361063000000ns timeout=1558286561589282165ns
[ 88.470226] IPC_RTR: do_read_data: No local port id 00000160
[ 88.474069] IPC_RTR: do_read_data: No local port id 00000160
[ 88.700454] IRQ6 no longer affine to CPU4
[ 98.870154] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Write iovec request received for /boot/modem_fs2
[ 98.870611] rmt_storage:INFO:rmt_storage_client_thread: Calling Write [offset=0, size=2097152]for /boot/modem_fs2!
[ 98.928916] rmt_storage:INFO:rmt_storage_client_thread: Done Write (bytes = 2097152) for /boot/modem_fs2!
[ 99.237338] logd: logdr: UID=10016 GID=10016 PID=6862 n tail=0 logMask=4 pid=0 start=0ns timeout=0ns
[ 99.912690] logd: logdr: UID=10016 GID=10016 PID=6862 n tail=0 logMask=4 pid=0 start=0ns timeout=0ns
[ 103.628092] CPU6: update max cpu_capacity 1024
[ 103.630019] CPU6: update max cpu_capacity 967
[ 103.674700] init: Untracked pid 9820 exited with status 0
[ 105.741054] IRQ6 no longer affine to CPU6
[ 107.597355] init: Received control message 'start' for 'bootanim' from pid: 726 (/system/bin/surfaceflinger)
[ 107.597886] init: starting service 'bootanim'...
[ 107.654239] init: Service 'zygote' (pid 5720) received signal 9
[ 107.654269] init: Sending signal 9 to service 'zygote' (pid 5720) process group...
[ 107.679085] libprocessgroup: Successfully killed process cgroup uid 0 pid 5720 in 24ms
[ 107.679940] init: Command 'write /sys/power/state on' action=onrestart (<Service 'zygote' onrestart>:2) took 0ms and failed: Unable to write to file '/sys/power/state': Unable to write file contents: Invalid argument
[ 107.679958] init: Sending signal 9 to service 'audioserver' (pid 5723) process group...
[ 107.753715] libprocessgroup: Successfully killed process cgroup uid 1041 pid 5723 in 73ms
[ 107.753980] init: Command 'restart audioserver' action=onrestart (<Service 'zygote' onrestart>:3) took 74ms and succeeded
[ 107.778393] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 107.778400] SMBLIB: smblib_handle_usbin_uv: PMI: smblib_handle_usbin_uv: DEBUG: RESET STORM COUNT FOR POWER_OK
[ 107.778452] SMBLIB: smblib_usb_plugin_locked: acquire chg_wake_lock
[ 107.779654] SMBLIB: smblib_awake_vote_callback: set awake=1
[ 107.779678] SMBLIB: smblib_usb_plugin_locked: IRQ: attached
[ 107.780201] IRQ6 no longer affine to CPU6
[ 107.883396] qtaguid: tag_stat: stat_update() p2p0 not found
[ 107.937144] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 107.969377] healthd: battery l=92 v=4195 t=28.5 h=2 st=4 c=-555 fc=2878000 cc=0 chg=
[ 107.983580] healthd: battery l=92 v=4195 t=28.5 h=2 st=4 c=-555 fc=2878000 cc=0 chg=
[ 107.990857] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
[ 108.006356] healthd: battery l=92 v=4195 t=28.5 h=2 st=4 c=-555 fc=2878000 cc=0 chg=
[ 108.013055] healthd: battery l=92 v=4195 t=28.5 h=2 st=4 c=-555 fc=2878000 cc=0 chg=
[ 108.169520] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 108.175178] i2c_geni 88c000.i2c: i2c error :-107
[ 108.175194] pn544_dev_write : i2c_master_send returned -107
[ 108.180043] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff
[ 108.180986] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
[ 108.181520] max98927_info_rivision_ctl
[ 108.181616] max98927_info_rivision_ctl
[ 108.181712] max98927_get_rivision_ctl
[ 108.182170] max98927_digital_gain_get: spk_gain setting returned 0
[ 108.187185] max98927_mono_out_get_l: value:128
[ 108.187379] max98927_mono_out_get_r: value:0
[ 108.187988] max98927_left_channel_enable_get: value:0
[ 108.188099] max98927_right_channel_enable_get: value:0
[ 108.208306] pn544_dev_ioctl :enter cmd = 1074063617, arg = 0
[ 108.208311] p61_access_lock: Enter
[ 108.208314] p61_access_lock: Exit
[ 108.208316] pn544_dev_ioctl power off
[ 108.208317] p61_update_access_state: Enter current_state = 100
[ 108.208319] p61_update_access_state: Exit current_state = 100
[ 108.208333] p61_access_unlock: Enter
[ 108.208335] p61_access_unlock: Exit
[ 108.208336] pn544_dev_ioctl :exit cmd = 1074063617, arg = 0
[ 108.213422] qtaguid: tag_stat: stat_update() p2p0 not found
[ 108.255214] CPU7: update max cpu_capacity 1024
[ 108.497403] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 108.505615] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff
[ 108.506815] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
[ 108.507333] max98927_info_rivision_ctl
[ 108.507395] max98927_info_rivision_ctl
[ 108.507426] max98927_get_rivision_ctl
[ 108.507747] max98927_digital_gain_get: spk_gain setting returned 0
[ 108.511943] max98927_mono_out_get_l: value:128
[ 108.512148] max98927_mono_out_get_r: value:0
[ 108.512731] max98927_left_channel_enable_get: value:0
[ 108.512825] max98927_right_channel_enable_get: value:0
[ 108.585079] SMBLIB: smblib_handle_usb_source_change: APSD_STATUS=0x01
[ 108.585153] SMBLIB: smblib_set_icl_current: icl_ua=475000
[ 108.585244] SMBLIB: smblib_set_usb_suspend: suspend=0
[ 108.585260] SMBLIB: smblib_set_icl_current: icl_ua=1500000
[ 108.585341] SMBLIB: smblib_set_usb_suspend: suspend=0
[ 108.585363] SMBLIB: op_charging_en: enable=1
[ 108.586356] SMBLIB: handle_batt_temp_normal: triggered
[ 108.586367] SMBLIB: set_chg_ibat_vbat_max: set ibatmax=1950 and set vbatmax=4400
[ 108.588471] SMBLIB: op_battery_temp_region_set: set temp_region=5
[ 108.588482] SMBLIB: smblib_handle_apsd_done: apsd result=0x4, name=CDP, psy_type=6
[ 108.589414] SMBLIB: smblib_handle_apsd_done: apsd done,current_now=555
[ 108.590560] usbpd usbpd0: typec mode:6 present:1 type:6 orientation:1
[ 108.590569] usbpd usbpd0: Type-C Source (default) connected
[ 108.593267] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
[ 108.608267] healthd: battery l=92 v=4195 t=28.5 h=2 st=2 c=-555 fc=2878000 cc=0 chg=u
[ 108.609778] healthd: battery l=92 v=4195 t=28.5 h=2 st=2 c=-555 fc=2878000 cc=0 chg=u
[ 108.767573] healthd: battery l=92 v=4195 t=28.5 h=2 st=2 c=-555 fc=2878000 cc=0 chg=u
[ 108.768618] healthd: battery l=92 v=4195 t=28.5 h=2 st=2 c=-555 fc=2878000 cc=0 chg=u
[ 108.781851] healthd: battery l=92 v=4195 t=28.5 h=2 st=2 c=-555 fc=2878000 cc=0 chg=u
[ 108.782748] healthd: battery l=92 v=4195 t=28.5 h=2 st=2 c=-555 fc=2878000 cc=0 chg=u
[ 108.909401] android_work: sent uevent USB_STATE=CONNECTED
[ 109.040920] healthd: battery l=92 v=4141 t=28.5 h=2 st=2 c=-501 fc=2878000 cc=0 chg=u
[ 109.042291] healthd: battery l=92 v=4141 t=28.5 h=2 st=2 c=-501 fc=2878000 cc=0 chg=u
[ 109.189931] android_work: sent uevent USB_STATE=DISCONNECTED
[ 109.262580] android_work: sent uevent USB_STATE=CONNECTED
[ 109.316714] android_work: sent uevent USB_STATE=DISCONNECTED
[ 109.385062] SMBLIB: notify_usb_enumeration_function: status=1
[ 109.396413] android_work: sent uevent USB_STATE=CONNECTED
[ 109.400277] configfs-gadget gadget: high-speed config #1: b
[ 109.400366] usb_gadget_vbus_draw USB setting current is 500mA
[ 109.401132] android_work: sent uevent USB_STATE=CONFIGURED
[ 109.600066] SMBLIB: smbchg_re_det_work: re_det, usb_enum_status
[ 109.603520] SMBLIB: op_check_charger_uovp: charger_voltage=4218 charger_ovp=0
[ 109.603531] SMBLIB: op_check_charger_uovp: charger is over voltage, count=0
[ 109.603536] SMBLIB: op_check_charger_uovp: uovp_satus=1,pre_uovp_satus=0,over_volt_count=0
[ 109.734114] healthd: battery l=92 v=4141 t=28.5 h=2 st=2 c=-501 fc=2878000 cc=0 chg=u
[ 109.743575] healthd: battery l=92 v=4141 t=28.5 h=2 st=2 c=-501 fc=2878000 cc=0 chg=u
[ 109.836030] healthd: battery l=92 v=4141 t=28.5 h=2 st=2 c=-501 fc=2878000 cc=0 chg=u
[ 109.840890] healthd: battery l=92 v=4141 t=28.5 h=2 st=2 c=-501 fc=2878000 cc=0 chg=u
[ 109.883162] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/init.rc:778)
[ 109.888062] synaptics,s3320: key_disable_write_func key_back:0 key_appselect:0
[ 110.106794] acc_open
[ 110.106799] acc_release
[ 110.340907] IRQ6 no longer affine to CPU4
[ 110.442935] synaptics,s3320: tp_gesture_write_func write argc1[0xdf],argc2[0x0]
[ 110.458817] Wifi Turning On from UI
[ 110.459498] init: processing action (wlan.driver.status=ok) from (/vendor/etc/init/hw/init.target.rc:176)
[ 110.460232] init: processing action (wlan.driver.status=ok) from (OP_ACTION_INDEX:31)
[ 110.466621] synaptics,s3320: key_disable_write_func key_back:0 key_appselect:0
[ 110.484729] healthd: battery l=92 v=4294 t=28.5 h=2 st=2 c=707 fc=2878000 cc=0 chg=u
[ 110.579471] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 110.815760] msm-dsi-panel:[dsi_panel_set_srgb_mode:4354] sRGB Mode Off.
[ 110.816637] Real Send DCI-P3 off command
[ 110.817354] msm-dsi-panel:[dsi_panel_set_dci_p3_mode:4380] DCI-P3 Mode Off.
[ 110.817725] Real Send Night mode off command
[ 110.817952] msm-dsi-panel:[dsi_panel_set_night_mode:4407] night Mode Off.
[ 110.820135] CPU7: update max cpu_capacity 967
[ 110.832514] msm-dsi-panel:[dsi_panel_set_adaption_mode:4479] adaption Mode Off.
[ 110.926060] sdcardfs version 2.0
[ 110.926065] sdcardfs: dev_name -> /data/media
[ 110.926066] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
[ 110.926069] sdcardfs: mnt -> 0000000000000000
[ 110.926210] sdcardfs: mounted on top of /data/media type ext4
[ 110.926534] Remount options were mask=23,gid=9997 for vfsmnt 0000000000000000.
[ 110.926541] sdcardfs : options - debug:1
[ 110.926542] sdcardfs : options - gid:9997
[ 110.926543] sdcardfs : options - mask:23
[ 110.926657] Remount options were mask=7,gid=9997 for vfsmnt 0000000000000000.
[ 110.926661] sdcardfs : options - debug:1
[ 110.926662] sdcardfs : options - gid:9997
[ 110.926710] sdcardfs : options - mask:7
[ 112.853646] init: processing action (persist.sys.gamemode.wifiboost=0) from (/init.rc:863)
[ 112.853899] init: starting service 'networkboost_disable'...
[ 112.860377] init: Service 'networkboost_disable' (pid 11013) exited with status 0
[ 113.020199] IRQ6 no longer affine to CPU4
05-19 08:23:00.657 5726 5743 E Netd : Error adding IPv4 rule: Invalid argument
05-19 08:23:00.657 5726 5743 E Netd : failed to change permission on interface rmnet_data1 of netId 100 from 0 to 1
05-19 08:23:00.658 6238 6238 D DPMJ : |SERVICE| DPM received action android.intent.action.ANY_DATA_STATE
05-19 08:23:00.658 6238 6238 W DPMJ : |SERVICE| DPM received ACTION_ANY_DATA_CONNECTION_STATE_CHANGEDhipri
05-19 08:23:00.658 6238 6238 D DPMJ : |SERVICE| DPM currently does not support this apnType=hipri
05-19 08:23:00.658 7507 7507 D SecureService: onReceive action:android.intent.action.ANY_DATA_STATE
05-19 08:23:00.658 7507 7507 W ContextImpl: Calling a method in the system process without a qualified user: android.app.ContextImpl.sendBroadcast:1008 android.content.ContextWrapper.sendBroadcast:444 com.oneplus.security.SecureService$b.onReceive:188 android.app.LoadedApk$ReceiverDispatcher$Args.lambda$getRunnable$0:1424 android.app.-$$Lambda$LoadedApk$ReceiverDispatcher$Args$_BumDX2UKsnxLVrE6UJsJZkotuA.run:2
05-19 08:23:00.659 6298 6298 D TelephonyProvider: subIdString = 1 subId = 1
05-19 08:22:06.350 859 1656 E AndroidRuntime: *** FATAL EXCEPTION IN SYSTEM PROCESS: ConnectivityServiceThread
05-19 08:22:06.350 859 1656 E AndroidRuntime: java.lang.IllegalStateException: command '94 network permission network set NETWORK 100' failed with '400 94 setPermissionForNetworks() failed (Invalid argument)'
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.NetworkManagementService.setNetworkPermission(NetworkManagementService.java:2735)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.ConnectivityService.updateCapabilities(ConnectivityService.java:5207)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.ConnectivityService.handleLingerComplete(ConnectivityService.java:5434)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.ConnectivityService.access$3100(ConnectivityService.java:225)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.ConnectivityService$NetworkStateTrackerHandler.maybeHandleNetworkAgentInfoMessage(ConnectivityService.java:2417)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.ConnectivityService$NetworkStateTrackerHandler.handleMessage(ConnectivityService.java:2429)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at android.os.Handler.dispatchMessage(Handler.java:106)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.internal.util.WakeupMessage.onAlarm(WakeupMessage.java:133)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at android.app.AlarmManager$ListenerWrapper.run(AlarmManager.java:245)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at android.os.Handler.handleCallback(Handler.java:873)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at android.os.Handler.dispatchMessage(Handler.java:99)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at android.os.Looper.loop(Looper.java:193)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at android.os.HandlerThread.run(HandlerThread.java:65)
05-19 08:22:06.350 859 1656 E AndroidRuntime: Caused by: com.android.server.NativeDaemonConnector$NativeDaemonFailureException: command '94 network permission network set NETWORK 100' failed with '400 94 setPermissionForNetworks() failed (Invalid argument)'
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.NativeDaemonConnector.executeForList(NativeDaemonConnector.java:515)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.NativeDaemonConnector.execute(NativeDaemonConnector.java:411)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.NativeDaemonConnector.execute(NativeDaemonConnector.java:406)
05-19 08:22:06.350 859 1656 E AndroidRuntime: at com.android.server.NetworkManagementService.setNetworkPermission(NetworkManagementService.java:2730)
05-19 08:22:06.350 859 1656 E AndroidRuntime: ... 12 more
05-19 08:23:00.660 5838 5979 E AndroidRuntime: *** FATAL EXCEPTION IN SYSTEM PROCESS: ConnectivityServiceThread
05-19 08:23:00.660 5838 5979 E AndroidRuntime: java.lang.IllegalStateException: command '92 network permission network set NETWORK 100' failed with '400 92 setPermissionForNetworks() failed (Invalid argument)'
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.NetworkManagementService.setNetworkPermission(NetworkManagementService.java:2735)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.ConnectivityService.updateCapabilities(ConnectivityService.java:5207)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.ConnectivityService.handleLingerComplete(ConnectivityService.java:5434)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.ConnectivityService.access$3100(ConnectivityService.java:225)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.ConnectivityService$NetworkStateTrackerHandler.maybeHandleNetworkAgentInfoMessage(ConnectivityService.java:2417)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.ConnectivityService$NetworkStateTrackerHandler.handleMessage(ConnectivityService.java:2429)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at android.os.Handler.dispatchMessage(Handler.java:106)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.internal.util.WakeupMessage.onAlarm(WakeupMessage.java:133)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at android.app.AlarmManager$ListenerWrapper.run(AlarmManager.java:245)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at android.os.Handler.handleCallback(Handler.java:873)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at android.os.Handler.dispatchMessage(Handler.java:99)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at android.os.Looper.loop(Looper.java:193)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at android.os.HandlerThread.run(HandlerThread.java:65)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: Caused by: com.android.server.NativeDaemonConnector$NativeDaemonFailureException: command '92 network permission network set NETWORK 100' failed with '400 92 setPermissionForNetworks() failed (Invalid argument)'
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.NativeDaemonConnector.executeForList(NativeDaemonConnector.java:515)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.NativeDaemonConnector.execute(NativeDaemonConnector.java:411)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.NativeDaemonConnector.execute(NativeDaemonConnector.java:406)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: at com.android.server.NetworkManagementService.setNetworkPermission(NetworkManagementService.java:2730)
05-19 08:23:00.660 5838 5979 E AndroidRuntime: ... 12 more
05-19 08:23:00.665 6298 6298 I chatty : uid=1001(radio) identical 1 line
05-19 08:23:00.669 6298 6298 D TelephonyProvider: subIdString = 1 subId = 1
05-19 08:23:00.669 5838 5979 E OPDiagnose: OPDiagnoseManager addIssueCount type = 2, count = 1
05-19 08:23:00.669 5838 5979 E : BpOPDiagnoseServer addIssueCount type = 2, count = 1
05-19 08:23:00.670 718 803 E : BnOPDiagnoseServer ADD_ISSUE_COUNT type = 2, count = 1
05-19 08:23:00.670 718 803 W OPDiagnoseService: OPDiagnoseService addIssueCount type = 2, count = 1
05-19 08:23:00.670 718 802 D OPDiagnoseService: OPDiagnoseService get issue item...2
05-19 08:23:00.670 5838 5939 D OSTracker: OS Event: system_server_crash
05-19 08:23:00.672 5838 5858 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.intent.action.DROPBOX_ENTRY_ADDED flg=0x10 (has extras) } to com.google.android.gms/.stats.service.DropBoxEntryAddedReceiver
05-19 08:23:00.673 5838 5858 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.intent.action.DROPBOX_ENTRY_ADDED flg=0x10 (has extras) } to com.google.android.gms/.chimera.GmsIntentOperationService$PersistentTrustedReceiver
05-19 08:23:00.673 5838 5979 E Process : try to kill system_server
05-19 08:23:00.673 5838 5979 I Process : Sending signal. PID: 5838 SIG: 9

Next message: Wolfram Sang: "Re: [PATCH 2/3] mmc: core: API for temporarily disabling auto-retuning due to errors"
Previous message: Thomas Gleixner: "Re: [PATCH RFC] time: validate watchdog clocksource using second best candidate"
Next in thread: Florian Westphal: "Re: [PATCH 4.9 41/51] fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]