Re: [PATCH v5 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.

[Andrew Lunn]

On Mon, May 20, 2019 at 07:41:18PM +0530, Sagar Shrikant Kadam wrote:
> The i2c-ocore driver already has a polling mode interface.But it needs
> a workaround for FU540 Chipset on HiFive unleashed board (RevA00).
> There is an erratum in FU540 chip that prevents interrupt driven i2c
> transfers from working, and also the I2C controller's interrupt bit
> cannot be cleared if set, due to this the existing i2c polling mode
> interface added in mainline earlier doesn't work, and CPU stall's
> infinitely, when-ever i2c transfer is initiated.
> 
> Ref:previous polling mode support in mainline
> 
> 	commit 69c8c0c0efa8 ("i2c: ocores: add polling interface")
> 
> The workaround / fix under OCORES_FLAG_BROKEN_IRQ is particularly for
> FU540-COOO SoC.
> 
> Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>

Much better, thanks.

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew