[PATCH v4 0/3] iio: Add driver for Infineon DPS310
From: Eddie James
Date: Mon May 20 2019 - 22:16:13 EST
The DPS310 is a temperature and pressure sensor. It can be accessed over i2c
and SPI.
The driver supports polled measurement of temperature and pressure over i2c
only.
Changes since v3:
- Correct spacing in Kconfig
- Safer conversion from s64 to int
Changes since v2:
- Switch to processed rather than raw for both pressure and temperature
- Add locking around writing frequency/sampling rates and sensor reads
- Further cleanup
Changes since v1:
- Switch to wait for temperature/pressure sensor ready
- Various cleanup
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Eddie James (1):
iio: dps310: Add pressure sensing capability
Joel Stanley (1):
iio: Add driver for Infineon DPS310
MAINTAINERS | 6 +
drivers/iio/pressure/Kconfig | 11 +
drivers/iio/pressure/Makefile | 1 +
drivers/iio/pressure/dps310.c | 827 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 845 insertions(+)
create mode 100644 drivers/iio/pressure/dps310.c
--
1.8.3.1