Re: [PATCH v5 1/3] dt-bindings: i2c: extend existing opencore bindings.
From: Sagar Kadam
Date: Mon May 20 2019 - 23:51:38 EST
Hi Rob,
On Mon, May 20, 2019 at 8:07 PM Rob Herring <robh+dt@xxxxxxxxxx> wrote:
>
> On Mon, May 20, 2019 at 9:12 AM Sagar Shrikant Kadam
> <sagar.kadam@xxxxxxxxxx> wrote:
> >
> > Add FU540-C000 specific device tree bindings to already
> > available i2-ocores file. This device is available on
> > HiFive Unleashed Rev A00 board. Move interrupt and interrupt
> > parents under optional property list as these can be optional.
> >
> > The FU540-C000 SoC from sifive, has an Opencore's I2C block
> > reimplementation.
> >
> > The DT compatibility string for this IP is present in HDL and available at.
> > https://github.com/sifive/sifive-blocks/blob/master/src/main/scala/devices/i2c/I2C.scala#L73
> >
> > Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
> > ---
> > Documentation/devicetree/bindings/i2c/i2c-ocores.txt | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
> > index 17bef9a..b73960e 100644
> > --- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
> > @@ -2,8 +2,11 @@ Device tree configuration for i2c-ocores
> >
> > Required properties:
> > - compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
> > + "sifive,fu540-c000-i2c" or "sifive,i2c0".
>
> It's not an OR because both are required. Please reformat to 1 valid
> combination per line.
Yes, will rectify it in V6.
> > + for Opencore based I2C IP block reimplemented in
> > + FU540-C000 SoC.Please refer sifive-blocks-ip-versioning.txt
> > + for additional details.
> > - reg : bus address start and address range size of device
> > -- interrupts : interrupt number
> > - clocks : handle to the controller clock; see the note below.
> > Mutually exclusive with opencores,ip-clock-frequency
> > - opencores,ip-clock-frequency: frequency of the controller clock in Hz;
> > @@ -12,6 +15,8 @@ Required properties:
> > - #size-cells : should be <0>
> >
> > Optional properties:
> > +- interrupt-parent: handle to interrupt controller.
>
> Drop this. interrupt-parent is implied.
>
Sure, will exclude it in v6.
> > +- interrupts : interrupt number.
> > - clock-frequency : frequency of bus clock in Hz; see the note below.
> > Defaults to 100 KHz when the property is not specified
> > - reg-shift : device register offsets are shifted by this value
> > --
> > 1.9.1
> >
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Thanks,
Sagar