[PATCH 3/6] staging: kpc2000: kpc_i2c: newline fixups to meet linux style guide
From: Geordan Neukum
Date: Wed May 22 2019 - 08:17:48 EST
The linux coding style document states:
1) That braces should not be used where a single single statement
will do. Therefore all instances of single block statements
wrapped in braces that do not meet the qualifications of any
of the exceptions to the rule should be fixed up.
2) That the declaration of variables local to a given function
should be immediately followed by a blank newline. Therefore,
the single instance of this in kpc2000_i2c.c should be fixed
up.
Signed-off-by: Geordan Neukum <gneukum1@xxxxxxxxx>
---
drivers/staging/kpc2000/kpc2000_i2c.c | 82 ++++++++++-----------------
1 file changed, 29 insertions(+), 53 deletions(-)
diff --git a/drivers/staging/kpc2000/kpc2000_i2c.c b/drivers/staging/kpc2000/kpc2000_i2c.c
index 40a89998726e..a1ebc2386d70 100644
--- a/drivers/staging/kpc2000/kpc2000_i2c.c
+++ b/drivers/staging/kpc2000/kpc2000_i2c.c
@@ -178,9 +178,8 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
- if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED)) {
+ if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED))
dev_err(&priv->adapter.dev, "Failed terminating the transaction\n");
- }
outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
return -ETIMEDOUT;
}
@@ -202,9 +201,8 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)
/* Clear error flags */
outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
- if (status) {
+ if (status)
dev_warn(&priv->adapter.dev, "Failed clearing status flags at end of transaction (%02x)\n", status);
- }
}
return result;
@@ -219,9 +217,8 @@ static int i801_transaction(struct i2c_device *priv, int xact)
dev_dbg(&priv->adapter.dev, "%s\n", __func__);
result = i801_check_pre(priv);
- if (result < 0) {
+ if (result < 0)
return result;
- }
/* the current contents of SMBHSTCNT can be overwritten, since PEC,
* INTREN, SMBSCMD are passed in xact
*/
@@ -234,9 +231,8 @@ static int i801_transaction(struct i2c_device *priv, int xact)
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
- if (result < 0) {
+ if (result < 0)
return result;
- }
outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
return 0;
@@ -255,9 +251,8 @@ static void i801_wait_hwpec(struct i2c_device *priv)
status = inb_p(SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_RETRIES));
- if (timeout > MAX_RETRIES) {
+ if (timeout > MAX_RETRIES)
dev_dbg(&priv->adapter.dev, "PEC Timeout!\n");
- }
outb_p(status, SMBHSTSTS(priv));
}
@@ -275,26 +270,22 @@ static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_sm
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
outb_p(len, SMBHSTDAT0(priv));
- for (i = 0; i < len; i++) {
+ for (i = 0; i < len; i++)
outb_p(data->block[i+1], SMBBLKDAT(priv));
- }
}
status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
- if (status) {
+ if (status)
return status;
- }
if (read_write == I2C_SMBUS_READ) {
len = inb_p(SMBHSTDAT0(priv));
- if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
return -EPROTO;
- }
data->block[0] = len;
- for (i = 0; i < len; i++) {
+ for (i = 0; i < len; i++)
data->block[i + 1] = inb_p(SMBBLKDAT(priv));
- }
}
return 0;
}
@@ -310,9 +301,8 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
dev_dbg(&priv->adapter.dev, "%s\n", __func__);
result = i801_check_pre(priv);
- if (result < 0) {
+ if (result < 0)
return result;
- }
len = data->block[0];
@@ -323,23 +313,20 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
for (i = 1; i <= len; i++) {
if (i == len && read_write == I2C_SMBUS_READ) {
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA)
smbcmd = I801_I2C_BLOCK_LAST;
- } else {
+ else
smbcmd = I801_BLOCK_LAST;
- }
} else {
- if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ) {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ)
smbcmd = I801_I2C_BLOCK_DATA;
- } else {
+ else
smbcmd = I801_BLOCK_DATA;
- }
}
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
- if (i == 1) {
+ if (i == 1)
outb_p(inb(SMBHSTCNT(priv)) | I801_START, SMBHSTCNT(priv));
- }
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
@@ -348,17 +335,15 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
} while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_RETRIES));
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
- if (result < 0) {
+ if (result < 0)
return result;
- }
if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
len = inb_p(SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
dev_err(&priv->adapter.dev, "Illegal SMBus block read size %d\n", len);
/* Recover */
- while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY) {
+ while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY)
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
- }
outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
return -EPROTO;
}
@@ -366,12 +351,10 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
}
/* Retrieve/store value in SMBBLKDAT */
- if (read_write == I2C_SMBUS_READ) {
+ if (read_write == I2C_SMBUS_READ)
data->block[i] = inb_p(SMBBLKDAT(priv));
- }
- if (read_write == I2C_SMBUS_WRITE && i+1 <= len) {
+ if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
outb_p(data->block[i+1], SMBBLKDAT(priv));
- }
/* signals SMBBLKDAT ready */
outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
}
@@ -384,9 +367,8 @@ static int i801_set_block_buffer_mode(struct i2c_device *priv)
dev_dbg(&priv->adapter.dev, "%s\n", __func__);
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
- if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) {
+ if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
return -EIO;
- }
return 0;
}
@@ -411,12 +393,10 @@ static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data
}
if (read_write == I2C_SMBUS_WRITE || command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (data->block[0] < 1) {
+ if (data->block[0] < 1)
data->block[0] = 1;
- }
- if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
data->block[0] = I2C_SMBUS_BLOCK_MAX;
- }
} else {
data->block[0] = 32; /* max for SMBus block reads */
}
@@ -425,14 +405,12 @@ static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data
* SMBus (not I2C) block transactions, even though the datasheet
* doesn't mention this limitation.
*/
- if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0) {
+ if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0)
result = i801_block_transaction_by_block(priv, data, read_write, hwpec);
- } else {
+ else
result = i801_block_transaction_byte_by_byte(priv, data, read_write, command, hwpec);
- }
- if (result == 0 && hwpec) {
+ if (result == 0 && hwpec)
i801_wait_hwpec(priv);
- }
if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) {
/* restore saved configuration register value */
//TODO: Figure out the right thing to do here...
@@ -465,18 +443,16 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
- if (read_write == I2C_SMBUS_WRITE) {
+ if (read_write == I2C_SMBUS_WRITE)
outb_p(command, SMBHSTCMD(priv));
- }
xact = I801_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE_DATA\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
outb_p(command, SMBHSTCMD(priv));
- if (read_write == I2C_SMBUS_WRITE) {
+ if (read_write == I2C_SMBUS_WRITE)
outb_p(data->byte, SMBHSTDAT0(priv));
- }
xact = I801_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
@@ -633,9 +609,8 @@ int pi2c_probe(struct platform_device *pldev)
pldev->name);
priv = devm_kzalloc(&pldev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv) {
+ if (!priv)
return -ENOMEM;
- }
i2c_set_adapdata(&priv->adapter, priv);
priv->adapter.owner = THIS_MODULE;
@@ -677,6 +652,7 @@ int pi2c_probe(struct platform_device *pldev)
int pi2c_remove(struct platform_device *pldev)
{
struct i2c_device *lddev;
+
dev_dbg(&pldev->dev, "%s(pldev = %p '%s')\n", __func__, pldev,
pldev->name);
--
2.21.0