Re: [PATCH v3 1/3] thermal: rockchip: fix up the tsadc pinctrl setting error

From: Daniel Lezcano
Date: Wed May 22 2019 - 08:23:35 EST



Elaine,

are you taking care of the issue related to this patch. If not fixed, it
will be reverted.


On 30/04/2019 12:09, Elaine Zhang wrote:
> Explicitly use the pinctrl to set/unset the right mode
> instead of relying on the pinctrl init mode.
> And it requires setting the tshut polarity before select pinctrl.
>
> When the temperature sensor mode is set to 0, it will automatically
> reset the board via the Clock-Reset-Unit (CRU) if the over temperature
> threshold is reached. However, when the pinctrl initializes, it does a
> transition to "otp_out" which may lead the SoC restart all the time.
>
> "otp_out" IO may be connected to the RESET circuit on the hardware.
> If the IO is in the wrong state, it will trigger RESET.
> (similar to the effect of pressing the RESET button)
> which will cause the soc to restart all the time.
>
> Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
> ---
> drivers/thermal/rockchip_thermal.c | 36 +++++++++++++++++++++++++++++++++---
> 1 file changed, 33 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index 9c7643d62ed7..6dc7fc516abf 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -172,6 +172,9 @@ struct rockchip_thermal_data {
> int tshut_temp;
> enum tshut_mode tshut_mode;
> enum tshut_polarity tshut_polarity;
> + struct pinctrl *pinctrl;
> + struct pinctrl_state *gpio_state;
> + struct pinctrl_state *otp_state;
> };
>
> /**
> @@ -1242,6 +1245,8 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
> return error;
> }
>
> + thermal->chip->control(thermal->regs, false);
> +
> error = clk_prepare_enable(thermal->clk);
> if (error) {
> dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
> @@ -1267,6 +1272,30 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
> thermal->chip->initialize(thermal->grf, thermal->regs,
> thermal->tshut_polarity);
>
> + if (thermal->tshut_mode == TSHUT_MODE_GPIO) {
> + thermal->pinctrl = devm_pinctrl_get(&pdev->dev);
> + if (IS_ERR(thermal->pinctrl)) {
> + dev_err(&pdev->dev, "failed to find thermal pinctrl\n");
> + return PTR_ERR(thermal->pinctrl);
> + }
> +
> + thermal->gpio_state = pinctrl_lookup_state(thermal->pinctrl,
> + "gpio");
> + if (IS_ERR_OR_NULL(thermal->gpio_state)) {
> + dev_err(&pdev->dev, "failed to find thermal gpio state\n");
> + return -EINVAL;
> + }
> +
> + thermal->otp_state = pinctrl_lookup_state(thermal->pinctrl,
> + "otpout");
> + if (IS_ERR_OR_NULL(thermal->otp_state)) {
> + dev_err(&pdev->dev, "failed to find thermal otpout state\n");
> + return -EINVAL;
> + }
> +
> + pinctrl_select_state(thermal->pinctrl, thermal->otp_state);
> + }
> +
> for (i = 0; i < thermal->chip->chn_num; i++) {
> error = rockchip_thermal_register_sensor(pdev, thermal,
> &thermal->sensors[i],
> @@ -1337,8 +1366,8 @@ static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
>
> clk_disable(thermal->pclk);
> clk_disable(thermal->clk);
> -
> - pinctrl_pm_select_sleep_state(dev);
> + if (thermal->tshut_mode == TSHUT_MODE_GPIO)
> + pinctrl_select_state(thermal->pinctrl, thermal->gpio_state);
>
> return 0;
> }
> @@ -1383,7 +1412,8 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
> for (i = 0; i < thermal->chip->chn_num; i++)
> rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
>
> - pinctrl_pm_select_default_state(dev);
> + if (thermal->tshut_mode == TSHUT_MODE_GPIO)
> + pinctrl_select_state(thermal->pinctrl, thermal->otp_state);
>
> return 0;
> }
>


--
<http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog