Re: [PATCH V7 12/15] arm64: tegra: Enable PCIe slots in P2972-0000 board

[Thierry Reding]

On Tue, May 21, 2019 at 11:47:45PM +0530, Vidya Sagar wrote:
> On 5/21/2019 4:24 PM, Thierry Reding wrote:
> > On Fri, May 17, 2019 at 06:08:43PM +0530, Vidya Sagar wrote:
> > > Enable PCIe controller nodes to enable respective PCIe slots on
> > > P2972-0000 board. Following is the ownership of slots by different
> > > PCIe controllers.
> > > Controller-0 : M.2 Key-M slot
> > > Controller-1 : On-board Marvell eSATA controller
> > > Controller-3 : M.2 Key-E slot
> > > 
> > > Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> > > ---
> > > Changes since [v6]:
> > > * None
> > > 
> > > Changes since [v5]:
> > > * Arranged PCIe nodes in the order of their addresses
> > > 
> > > Changes since [v4]:
> > > * None
> > > 
> > > Changes since [v3]:
> > > * None
> > > 
> > > Changes since [v2]:
> > > * Changed P2U label names to reflect new format that includes 'hsio'/'nvhs'
> > >    strings to reflect UPHY brick they belong to
> > > 
> > > Changes since [v1]:
> > > * Dropped 'pcie-' from phy-names property strings
> > > 
> > >   .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |  2 +-
> > >   .../boot/dts/nvidia/tegra194-p2972-0000.dts   | 41 +++++++++++++++++++
> > >   2 files changed, 42 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
> > > index 0fd5bd29fbf9..30a83d4c5b69 100644
> > > --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
> > > +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
> > > @@ -191,7 +191,7 @@
> > >   						regulator-boot-on;
> > >   					};
> > > -					sd3 {
> > > +					vdd_1v8ao: sd3 {
> > >   						regulator-name = "VDD_1V8AO";
> > >   						regulator-min-microvolt = <1800000>;
> > >   						regulator-max-microvolt = <1800000>;
> > > diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> > > index 73801b48d1d8..a22704e76a84 100644
> > > --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> > > +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> > > @@ -167,4 +167,45 @@
> > >   			};
> > >   		};
> > >   	};
> > > +
> > > +	pcie@14100000 {
> > > +		status = "okay";
> > > +
> > > +		vddio-pex-ctl-supply = <&vdd_1v8ao>;
> > > +
> > > +		phys = <&p2u_hsio_0>;
> > > +		phy-names = "p2u-0";
> > > +	};
> > > +
> > > +	pcie@14140000 {
> > > +		status = "okay";
> > > +
> > > +		vddio-pex-ctl-supply = <&vdd_1v8ao>;
> > > +
> > > +		phys = <&p2u_hsio_7>;
> > > +		phy-names = "p2u-0";
> > > +	};
> > > +
> > > +	pcie@14180000 {
> > > +		status = "okay";
> > > +
> > > +		vddio-pex-ctl-supply = <&vdd_1v8ao>;
> > > +
> > > +		phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
> > > +		       <&p2u_hsio_5>;
> > > +		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
> > > +	};
> > > +
> > > +	pcie@141a0000 {
> > > +		status = "disabled";
> > > +
> > > +		vddio-pex-ctl-supply = <&vdd_1v8ao>;
> > > +
> > > +		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
> > > +		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
> > > +		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
> > > +
> > > +		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
> > > +			    "p2u-5", "p2u-6", "p2u-7";
> > > +	};
> > 
> > This last controller is disabled by default. Why do we need to include
> > all of this if it's not going to be used anyway?
> I want to keep this entry ready by populating all the required fields. When pinctrl
> driver is ready, I'll send out patches to enable this node as well.

Okay, makes sense.

Thierry

Attachment: signature.asc
Description: PGP signature