[PATCH 0/2] net: macb: Add support for SiFive FU540-C000

[Yash Shah]

On FU540, the management IP block is tightly coupled with the Cadence
MACB IP block. It manages many of the boundary signals from the MACB IP
This patchset controls the tx_clk input signal to the MACB IP. It
switches between the local TX clock (125MHz) and PHY TX clocks. This
is necessary to toggle between 1Gb and 100/10Mb speeds.

Future patches may add support for monitoring or controlling other IP
boundary signals.

This patchset is mostly based on work done by
Wesley Terpstra <wesley@xxxxxxxxxx>

This patchset is based on Linux v5.2-rc1 and tested on HiFive Unleashed
board with additional board related patches needed for testing can be
found at dev/yashs/ethernet branch of:
https://github.com/yashshah7/riscv-linux.git

Yash Shah (2):
  net/macb: bindings doc: add sifive fu540-c000 binding
  net: macb: Add support for SiFive FU540-C000

 Documentation/devicetree/bindings/net/macb.txt |   3 +
 drivers/net/ethernet/cadence/macb_main.c       | 118 +++++++++++++++++++++++++
 2 files changed, 121 insertions(+)

-- 
1.9.1