Re: [PATCH 4/6] drm/bridge: Add Analogix anx6345 support

From: Torsten Duwe
Date: Thu May 23 2019 - 08:48:25 EST


On Thu, May 23, 2019 at 10:50:41AM +0300, Laurent Pinchart wrote:
> Hi Torsten,
>
> Thank you for the patch.

Thank you for the thorough review!

> On Thu, May 23, 2019 at 08:53:56AM +0200, Torsten Duwe wrote:
> > +{
> > + struct anx6345 *anx6345 = connector_to_anx6345(connector);
> > + int err, num_modes = 0;
> > + bool power_off = false;
> > +
> > + mutex_lock(&anx6345->lock);
> > +
> > + if (!anx6345->edid) {
>
> Could the chip be used with a hot-pluggable display, or is it guaranteed
> that EDID will never change ?

The chip itself is capable of (e)DP hot-plugging, so the signals suggest.
See the previous discussions about what to expect on the output side.
Currently, the driver does not handle hot-plugging.

> > +
> > + err = drm_of_find_panel_or_bridge(client->dev.of_node, 1, 0,
> > + &anx6345->panel, NULL);
> > + if (err == -EPROBE_DEFER)
> > + return err;
> > +
> > + if (err)
> > + DRM_DEBUG("No panel found\n");
>
> Shouldn't this be fatal ?

No, basically same as above. On the output side, there can be a panel,
another bridge, or some eDP plug. If the DT didn't explicitly specify
a panel or a bridge, we can still generate video output as soon as
there is valid EDID data.

Your other points went straight onto my TODO list.

Torsten