Re: [RESEND PATCH v4 1/6] regulator: lm363x: Make the gpio register enable flexible
From: Mark Brown
Date: Thu May 23 2019 - 09:06:13 EST
On Wed, May 22, 2019 at 02:27:28PM -0500, Dan Murphy wrote:
> The use of and enablement of the GPIO can be used across devices.
> Use the enable_reg in the regulator descriptor for the register to
> write.
> @@ -263,8 +263,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
>
> if (gpiod) {
> cfg.ena_gpiod = gpiod;
> -
> - ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
> + ret = regmap_update_bits(regmap,
> + lm363x_regulator_desc[id].enable_reg,
> LM3632_EXT_EN_MASK,
> LM3632_EXT_EN_MASK);
> if (ret) {
Is it guaranteed that the bitmask for enabling the use of the GPIO is
going to be the same for all regulators? The bitmasks for the regulator
enable look to be different, and it also looks like this setting might
affect multiple regulators since it seems there are multiple enable bits
in the same register. If this affects multiple regulators then how's
that working at the minute?
Attachment:
signature.asc
Description: PGP signature