Re: [GIT PULL] Thermal-SoC management changes for v5.2-rc1

From: Eduardo Valentin
Date: Thu May 23 2019 - 22:43:48 EST

Next message: Wang, Haiyue: "Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages"
Previous message: Steven Rostedt: "Re: [RFC PATCH 00/11] bpf, trace, dtrace: DTrace BPF program type implementation and sample use"
In reply to: Tomeu Vizoso: "Re: [GIT PULL] Thermal-SoC management changes for v5.2-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, May 23, 2019 at 11:46:47AM +0200, Tomeu Vizoso wrote:
> Hi Eduardo,
>
> I saw that for 5.1 [0] you included a kernelci boot report for your
> tree, but not for 5.2. Have you found anything that should be improved
> in KernelCI for it to be more useful to maintainers like you?

Honestly, I take a couple of automated testing as input before sending
my pulls to Linux: (a) my local test, (b) kernel-ci, and (c) 0-day.

There was really no reason specifically for me to not add the report
from kernelci, except..
>
> [0] https://lore.kernel.org/lkml/20190306161207.GA7365@xxxxxxxxxxxxxxxxxxxxx/
>
> I found about this when trying to understand why the boot on the
> veyron-jaq board has been broken in 5.2-rc1.
>

I remember a report saying this failed, but from what I could tell from
the boot log, the board booted and hit terminal. But apparently, after
all reports from developers, the veyron-jaq boards were in a hang state.

That was hard for me to tell from your logs, as they looked like
a regular boot that hits terminal.

Maybe I should have looked for a specific output of a command you guys
run, saying "successful boot" somewhere?

> Thanks,
>
> Tomeu
>
> On Thu, 16 May 2019 at 06:43, Eduardo Valentin <edubezval@xxxxxxxxx> wrote:
> >
> > Hello Linus,
> >
> > Please consider the following thermal soc changes for v5.2-rc1.
> >
> > The following changes since commit 37624b58542fb9f2d9a70e6ea006ef8a5f66c30b:
> >
> > Linux 5.1-rc7 (2019-04-28 17:04:13 -0700)
> >
> > are available in the git repository at:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal linus
> >
> > for you to fetch changes up to 37bcec5d9f71bd13142a97d2196b293c9ac23823:
> >
> > hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register (2019-05-14 07:00:47 -0700)
> >
> > Specifics:
> > - thermal core has a new devm_* API for registering cooling devices, thanks to Guenter R.
> > I took the entire series, that is why you see changes on drivers/hwmon in this pull.
> > - rockchip thermal driver gains support to PX30 SoC, thanks to Elaine Z.
> > - the generic-adc thermal driver now considers the lookup table DT property as optional,
> > thanks to Jean-Francois D.
> > - Refactoring of tsens thermal driver, thanks to Amit K.
> > - Cleanups on cpu cooling driver, thanks to Daniel L.
> > - broadcom thermal driver dropped support to ACPI, thanks to Srinath M.
> > - tegra thermal driver gains support to OC hw throttle and GPU throtle, thanks to Wei Ni.
> > - Fixes in several thermal drivers.
> >
> > BR,
> >
> > Eduardo Valentin
> >
> > ----------------------------------------------------------------
> > Amit Kucheria (21):
> > drivers: thermal: tsens: Document the data structures
> > drivers: thermal: tsens: Rename tsens_data
> > drivers: thermal: tsens: Rename tsens_device
> > drivers: thermal: tsens: Rename variable tmdev
> > drivers: thermal: tsens: Use consistent names for variables
> > drivers: thermal: tsens: Function prototypes should have argument names
> > drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974
> > drivers: thermal: tsens: Rename constants to prepare to merge with tsens-8974
> > drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1
> > drivers: thermal: tsens: Introduce reg_fields to deal with register description
> > drivers: thermal: tsens: Save reference to the device pointer and use it
> > drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER
> > drivers: thermal: tsens: Add new operation to check if a sensor is enabled
> > drivers: thermal: tsens: change data type for sensor IDs
> > drivers: thermal: tsens: Introduce IP-specific max_sensor count
> > drivers: thermal: tsens: simplify get_temp_tsens_v2 routine
> > drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing
> > drivers: thermal: tsens: Common get_temp() learns to do ADC conversion
> > dt: thermal: tsens: Add bindings for qcs404
> > drivers: thermal: tsens: Add generic support for TSENS v1 IP
> > drivers: thermal: tsens: Move calibration constants to header file
> >
> > Andrey Smirnov (1):
> > thermal: qoriq: Remove unnecessary DT node is NULL check
> >
> > Daniel Lezcano (4):
> > thermal/drivers/cpu_cooling: Remove pointless test in power2state()
> > thermal/drivers/cpu_cooling: Fixup the header and copyright
> > thermal/drivers/cpu_cooling: Add Software Package Data Exchange (SPDX)
> > thermal/drivers/cpu_cooling: Remove pointless field
> >
> > Elaine Zhang (3):
> > thermal: rockchip: fix up the tsadc pinctrl setting error
> > dt-bindings: rockchip-thermal: Support the PX30 SoC compatible
> > thermal: rockchip: Support the PX30 SoC in thermal driver
> >
> > Enrico Weigelt, metux IT consult (1):
> > drivers: thermal: Kconfig: pedantic cleanups
> >
> > Guenter Roeck (6):
> > thermal: Introduce devm_thermal_of_cooling_device_register
> > hwmon: (aspeed-pwm-tacho) Use devm_thermal_of_cooling_device_register
> > hwmon: (gpio-fan) Use devm_thermal_of_cooling_device_register
> > hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_register
> > hwmon: (npcm750-pwm-fan) Use devm_thermal_of_cooling_device_register
> > hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register
> >
> > Hoan Nguyen An (1):
> > thermal: rcar_gen3_thermal: Fix init value of IRQCTL register
> >
> > Jean-Francois Dagenais (2):
> > thermal: generic-adc: make lookup table optional
> > dt-bindings: thermal: generic-adc: make lookup-table optional
> >
> > Jiada Wang (3):
> > thermal: rcar_gen3_thermal: fix interrupt type
> > thermal: rcar_gen3_thermal: disable interrupt in .remove
> > thermal: rcar_gen3_thermal: Fix to show correct trip points number
> >
> > Matthias Kaehlcke (1):
> > thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power
> >
> > Srinath Mannam (1):
> > thermal: broadcom: Remove ACPI support
> >
> > Talel Shenhar (3):
> > dt-bindings: thermal: al-thermal: Add binding documentation
> > thermal: Introduce Amazon's Annapurna Labs Thermal Driver
> > thermal: Fix build error of missing devm_ioremap_resource on UM
> >
> > Wei Ni (9):
> > of: Add bindings of thermtrip for Tegra soctherm
> > thermal: tegra: support hw and sw shutdown
> > of: Add bindings of gpu hw throttle for Tegra soctherm
> > thermal: tegra: add support for gpu hw-throttle
> > thermal: tegra: add support for thermal IRQ
> > thermal: tegra: add set_trips functionality
> > thermal: tegra: add support for EDP IRQ
> > of: Add bindings of OC hw throttle for Tegra soctherm
> > thermal: tegra: enable OC hw throttle
> >
> > Wolfram Sang (1):
> > thermal: stm32: simplify getting .driver_data
> >
> > Yangtao Li (1):
> > of: thermal: Improve print information
> >
> > Yoshihiro Kaneko (1):
> > thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs
> >
> > .../bindings/thermal/amazon,al-thermal.txt | 33 +
> > .../bindings/thermal/nvidia,tegra124-soctherm.txt | 62 +-
> > .../devicetree/bindings/thermal/qcom-tsens.txt | 14 +
> > .../bindings/thermal/rockchip-thermal.txt | 1 +
> > .../bindings/thermal/thermal-generic-adc.txt | 10 +-
> > MAINTAINERS | 6 +
> > drivers/hwmon/aspeed-pwm-tacho.c | 6 +-
> > drivers/hwmon/gpio-fan.c | 25 +-
> > drivers/hwmon/mlxreg-fan.c | 31 +-
> > drivers/hwmon/npcm750-pwm-fan.c | 6 +-
> > drivers/hwmon/pwm-fan.c | 73 +-
> > drivers/thermal/Kconfig | 11 +
> > drivers/thermal/Makefile | 1 +
> > drivers/thermal/broadcom/sr-thermal.c | 8 -
> > drivers/thermal/cpu_cooling.c | 30 +-
> > drivers/thermal/of-thermal.c | 3 +
> > drivers/thermal/qcom/Makefile | 4 +-
> > drivers/thermal/qcom/tsens-8916.c | 105 ---
> > drivers/thermal/qcom/tsens-8960.c | 84 +-
> > drivers/thermal/qcom/tsens-common.c | 159 +++-
> > .../thermal/qcom/{tsens-8974.c => tsens-v0_1.c} | 166 +++-
> > drivers/thermal/qcom/tsens-v1.c | 193 +++++
> > drivers/thermal/qcom/tsens-v2.c | 111 +--
> > drivers/thermal/qcom/tsens.c | 100 ++-
> > drivers/thermal/qcom/tsens.h | 291 ++++++-
> > drivers/thermal/qoriq_thermal.c | 5 -
> > drivers/thermal/rcar_gen3_thermal.c | 51 +-
> > drivers/thermal/rcar_thermal.c | 11 +-
> > drivers/thermal/rockchip_thermal.c | 74 +-
> > drivers/thermal/st/Kconfig | 22 +-
> > drivers/thermal/st/stm_thermal.c | 6 +-
> > drivers/thermal/tegra/Kconfig | 4 +-
> > drivers/thermal/tegra/soctherm.c | 961 +++++++++++++++++++--
> > drivers/thermal/tegra/soctherm.h | 16 +
> > drivers/thermal/tegra/tegra124-soctherm.c | 7 +-
> > drivers/thermal/tegra/tegra132-soctherm.c | 7 +-
> > drivers/thermal/tegra/tegra210-soctherm.c | 15 +-
> > drivers/thermal/thermal-generic-adc.c | 9 +-
> > drivers/thermal/thermal_core.c | 49 ++
> > drivers/thermal/thermal_mmio.c | 129 +++
> > include/dt-bindings/thermal/tegra124-soctherm.h | 8 +-
> > include/linux/thermal.h | 13 +
> > 42 files changed, 2330 insertions(+), 590 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
> > delete mode 100644 drivers/thermal/qcom/tsens-8916.c
> > rename drivers/thermal/qcom/{tsens-8974.c => tsens-v0_1.c} (56%)
> > create mode 100644 drivers/thermal/qcom/tsens-v1.c
> > create mode 100644 drivers/thermal/thermal_mmio.c

Next message: Wang, Haiyue: "Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages"
Previous message: Steven Rostedt: "Re: [RFC PATCH 00/11] bpf, trace, dtrace: DTrace BPF program type implementation and sample use"
In reply to: Tomeu Vizoso: "Re: [GIT PULL] Thermal-SoC management changes for v5.2-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]