Re: [PATCH] arm64: dts: allwinner: a64: Add lradc node

[Maxime Ripard]

On Fri, May 24, 2019 at 10:35:36AM +0200, Luca Weiss wrote:
> On Dienstag, 21. Mai 2019 16:25:44 CEST Maxime Ripard wrote:
> > On Tue, May 21, 2019 at 03:52:47PM +0200, luca@xxxxxxxxx wrote:
> > > On May 21, 2019 3:09:55 PM GMT+02:00, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxx> wrote:
> > > >On Tue, May 21, 2019 at 08:43:45AM +0200, luca@xxxxxxxxx wrote:
> > > >> On May 20, 2019 1:07:42 PM GMT+02:00, Maxime Ripard
> > > >
> > > ><maxime.ripard@xxxxxxxxxxx> wrote:
> > > >> >On Sat, May 18, 2019 at 07:09:30PM +0200, Luca Weiss wrote:
> > > >> >> Add a node describing the KEYADC on the A64.
> > > >> >>
> > > >> >> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> > > >> >> ---
> > > >> >>
> > > >> >>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 7 +++++++
> > > >> >>  1 file changed, 7 insertions(+)
> > > >> >>
> > > >> >> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > > >> >
> > > >> >b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > > >> >
> > > >> >> index 7734f70e1057..dc1bf8c1afb5 100644
> > > >> >> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > > >> >> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > > >> >> @@ -704,6 +704,13 @@
> > > >> >>
> > > >> >>  			status = "disabled";
> > > >> >>
> > > >> >>  		};
> > > >> >>
> > > >> >> +		lradc: lradc@1c21800 {
> > > >> >> +			compatible = "allwinner,sun4i-a10-lradc-
> keys";
> > > >> >> +			reg = <0x01c21800 0x100>;
> > > >> >> +			interrupts = <GIC_SPI 30
> IRQ_TYPE_LEVEL_HIGH>;
> > > >> >> +			status = "disabled";
> > > >> >> +		};
> > > >> >> +
> > > >> >
> > > >> >The controller is pretty different on the A64 compared to the A10.
> > > >
> > > >The
> > > >
> > > >> >A10 has two channels for example, while the A64 has only one.
> > > >> >
> > > >> >It looks like the one in the A83t though, so you can use that
> > > >> >compatible instead.
> > > >>
> > > >> Looking at the patch for the A83t, the only difference is that it
> > > >> uses a 3/4 instead of a 2/3 voltage divider, nothing is changed with
> > > >> the channels.
> > > >
> > > >I guess you can reuse the A83t compatible here then, and a more
> > > >specific a64 compatible in case we ever need to fix this.
> > > >
> > > >> But I'm also not sure which one (or a different one)
> > > >> is used from looking at the "A64 User Manual".
> > > >
> > > >I'm sorry, what are you referring to with "one" in that sentence?
> > >
> > > Sorry, I meant I didn't find anything in the A64 user manual whether
> > > a 3/4 or a 2/3 voltage divider (or one with different values) is
> > > used on the A64.
> >
> > Ok :)
> >
> > I guess you can just reuse the A83t compatible then, together with the
> > A64's.
>
> I'd submit a v2 with these changes to v1 then:
>                 lradc: lradc@1c21800 {
> -                       compatible = "allwinner,sun4i-a10-lradc-keys";
> -                       reg = <0x01c21800 0x100>;
> +                       compatible = "allwinner,sun50i-a64-lradc-keys",
> +                                    "allwinner,sun8i-a83t-r-lradc";
> +                       reg = <0x01c21800 0x400>;
>                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>                         status = "disabled";
>                 };
> Does that look okay?
> The reg change is due to me not spotting the address being 0x01C2
> 1800---0x01C2 1BFF, so the size should be 0x400 and not 0x100.

It would be great to drop the -keys from the compatible, and to
document the bindings

Looks good otherwise

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature