Re: [PATCH v7 1/3] dt-bindings: i2c: extend existing opencore bindings.
From: Rob Herring
Date: Fri May 24 2019 - 16:43:17 EST
On Wed, May 22, 2019 at 02:29:32PM +0530, Sagar Shrikant Kadam wrote:
> Reformatted compatibility strings to one valid combination on
> each line.
> Add FU540-C000 specific device tree bindings to already available
> i2-ocores file. This device is available on
> HiFive Unleashed Rev A00 board. Move interrupt under optional
> property list as this can be optional.
>
> The FU540-C000 SoC from sifive, has an Opencore's I2C block
> reimplementation.
>
> The DT compatibility string for this IP is present in HDL and available at.
> https://github.com/sifive/sifive-blocks/blob/master/src/main/scala/devices/i2c/I2C.scala#L73
>
> Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/i2c/i2c-ocores.txt | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
> index 17bef9a..db96951 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
> @@ -1,9 +1,13 @@
> Device tree configuration for i2c-ocores
>
> Required properties:
> -- compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
> +- compatible : "opencores,i2c-ocores",
> + "aeroflexgaisler,i2cmst",
> + "sifive,fu540-c000-i2c","sifive,i2c0".
space needed ^
And drop the end of line commas and period.
> + For Opencore based I2C IP block reimplemented in
> + FU540-C000 SoC.Please refer sifive-blocks-ip-versioning.txt
And here too.
And 'refer to'
> + for additional details.
> - reg : bus address start and address range size of device
> -- interrupts : interrupt number
> - clocks : handle to the controller clock; see the note below.
> Mutually exclusive with opencores,ip-clock-frequency
> - opencores,ip-clock-frequency: frequency of the controller clock in Hz;
> @@ -12,6 +16,7 @@ Required properties:
> - #size-cells : should be <0>
>
> Optional properties:
> +- interrupts : interrupt number.
> - clock-frequency : frequency of bus clock in Hz; see the note below.
> Defaults to 100 KHz when the property is not specified
> - reg-shift : device register offsets are shifted by this value
> --
> 1.9.1
>