Re: [PATCH net-next v2 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems

[Andrew Lunn]

On Fri, May 24, 2019 at 05:53:02PM -0700, Ruslan Babayev wrote:
> Lookup I2C adapter using the "i2c-bus" device property on ACPI based
> systems similar to how it's done with DT.
> 
> An example DSD describing an SFP on an ACPI based system:
> 
> Device (SFP0)
> {
>     Name (_HID, "PRP0001")
>     Name (_CRS, ResourceTemplate()
>     {
>         GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionNone,
>                "\\_SB.PCI0.RP01.GPIO", 0, ResourceConsumer)
>             { 0, 1, 2, 3, 4 }
>     })
>     Name (_DSD, Package ()
>     {
>         ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
>         Package () {
>             Package () { "compatible", "sff,sfp" },
>             Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
>             Package () { "maximum-power-milliwatt", 1000 },
>             Package () { "tx-disable-gpios", Package () { ^SFP0, 0, 0, 1} },
>             Package () { "reset-gpio",       Package () { ^SFP0, 0, 1, 1} },
>             Package () { "mod-def0-gpios",   Package () { ^SFP0, 0, 2, 1} },
>             Package () { "tx-fault-gpios",   Package () { ^SFP0, 0, 3, 0} },
>             Package () { "los-gpios",        Package () { ^SFP0, 0, 4, 1} },
>         },
>     })
> }
> 
> Device (PHY0)
> {
>     Name (_HID, "PRP0001")
>     Name (_DSD, Package ()
>     {
>         ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
>         Package () {
>             Package () { "compatible", "ethernet-phy-ieee802.3-c45" },
>             Package () { "sfp", \_SB.PCI0.RP01.SFP0 },
>             Package () { "managed", "in-band-status" },
>             Package () { "phy-mode", "sgmii" },
>         },
>     })
> }
> 
> Signed-off-by: Ruslan Babayev <ruslan@xxxxxxxxxxx>
> Cc: xe-linux-external@xxxxxxxxx

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew