[PATCH v2 3/7] dmaengine: sun6i: Add a quirk for setting DRQ fields

From: ClÃment PÃron
Date: Sat May 25 2019 - 12:42:05 EST

Next message: David Miller: "Re: [PATCH 5/6] sparc64: use the generic get_user_pages_fast code"
Previous message: ClÃment PÃron: "[PATCH v2 4/7] dmaengine: sun6i: Add a quirk for setting mode fields"
In reply to: ClÃment PÃron: "[PATCH v2 4/7] dmaengine: sun6i: Add a quirk for setting mode fields"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>

H6 DMA has more than 32 possible DRQs. That means that current maximum
of 31 DRQs is not enough anymore.

Add a quirk which will set source and destination DRQ number.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
Signed-off-by: ClÃment PÃron <peron.clem@xxxxxxxxx>
---
drivers/dma/sun6i-dma.c | 48 ++++++++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 7d9606997251..f725b93fd21a 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -68,15 +68,15 @@
#define DMA_CHAN_LLI_ADDR 0x08

#define DMA_CHAN_CUR_CFG 0x0c
-#define DMA_CHAN_MAX_DRQ 0x1f
-#define DMA_CHAN_CFG_SRC_DRQ(x) ((x) & DMA_CHAN_MAX_DRQ)
+#define DMA_CHAN_MAX_DRQ_A31 0x1f
+#define DMA_CHAN_CFG_SRC_DRQ_A31(x) ((x) & DMA_CHAN_MAX_DRQ_A31)
#define DMA_CHAN_CFG_SRC_IO_MODE BIT(5)
#define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5)
#define DMA_CHAN_CFG_SRC_BURST_A31(x) (((x) & 0x3) << 7)
#define DMA_CHAN_CFG_SRC_BURST_H3(x) (((x) & 0x3) << 6)
#define DMA_CHAN_CFG_SRC_WIDTH(x) (((x) & 0x3) << 9)

-#define DMA_CHAN_CFG_DST_DRQ(x) (DMA_CHAN_CFG_SRC_DRQ(x) << 16)
+#define DMA_CHAN_CFG_DST_DRQ_A31(x) (DMA_CHAN_CFG_SRC_DRQ_A31(x) << 16)
#define DMA_CHAN_CFG_DST_IO_MODE (DMA_CHAN_CFG_SRC_IO_MODE << 16)
#define DMA_CHAN_CFG_DST_LINEAR_MODE (DMA_CHAN_CFG_SRC_LINEAR_MODE << 16)
#define DMA_CHAN_CFG_DST_BURST_A31(x) (DMA_CHAN_CFG_SRC_BURST_A31(x) << 16)
@@ -125,6 +125,7 @@ struct sun6i_dma_config {
*/
void (*clock_autogate_enable)(struct sun6i_dma_dev *);
void (*set_burst_length)(u32 *p_cfg, s8 src_burst, s8 dst_burst);
+ void (*set_drq)(u32 *p_cfg, s8 src_drq, s8 dst_drq);
u32 src_burst_lengths;
u32 dst_burst_lengths;
u32 src_addr_widths;
@@ -311,6 +312,12 @@ static void sun6i_set_burst_length_h3(u32 *p_cfg, s8 src_burst, s8 dst_burst)
DMA_CHAN_CFG_DST_BURST_H3(dst_burst);
}

+static void sun6i_set_drq_a31(u32 *p_cfg, s8 src_drq, s8 dst_drq)
+{
+ *p_cfg |= DMA_CHAN_CFG_SRC_DRQ_A31(src_drq) |
+ DMA_CHAN_CFG_DST_DRQ_A31(dst_drq);
+}
+
static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
{
struct sun6i_desc *txd = pchan->desc;
@@ -634,14 +641,13 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(

burst = convert_burst(8);
width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES);
- v_lli->cfg = DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
- DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
- DMA_CHAN_CFG_DST_LINEAR_MODE |
+ v_lli->cfg = DMA_CHAN_CFG_DST_LINEAR_MODE |
DMA_CHAN_CFG_SRC_LINEAR_MODE |
DMA_CHAN_CFG_SRC_WIDTH(width) |
DMA_CHAN_CFG_DST_WIDTH(width);

sdev->cfg->set_burst_length(&v_lli->cfg, burst, burst);
+ sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, DRQ_SDRAM);

sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);

@@ -695,9 +701,8 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
v_lli->dst = sconfig->dst_addr;
v_lli->cfg = lli_cfg |
DMA_CHAN_CFG_DST_IO_MODE |
- DMA_CHAN_CFG_SRC_LINEAR_MODE |
- DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
- DMA_CHAN_CFG_DST_DRQ(vchan->port);
+ DMA_CHAN_CFG_SRC_LINEAR_MODE;
+ sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, vchan->port);

dev_dbg(chan2dev(chan),
"%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n",
@@ -710,9 +715,8 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
v_lli->dst = sg_dma_address(sg);
v_lli->cfg = lli_cfg |
DMA_CHAN_CFG_DST_LINEAR_MODE |
- DMA_CHAN_CFG_SRC_IO_MODE |
- DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
- DMA_CHAN_CFG_SRC_DRQ(vchan->port);
+ DMA_CHAN_CFG_SRC_IO_MODE;
+ sdev->cfg->set_drq(&v_lli->cfg, vchan->port, DRQ_SDRAM);

dev_dbg(chan2dev(chan),
"%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n",
@@ -780,17 +784,15 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_cyclic(
v_lli->dst = sconfig->dst_addr;
v_lli->cfg = lli_cfg |
DMA_CHAN_CFG_DST_IO_MODE |
- DMA_CHAN_CFG_SRC_LINEAR_MODE |
- DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
- DMA_CHAN_CFG_DST_DRQ(vchan->port);
+ DMA_CHAN_CFG_SRC_LINEAR_MODE;
+ sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, vchan->port);
} else {
v_lli->src = sconfig->src_addr;
v_lli->dst = buf_addr + period_len * i;
v_lli->cfg = lli_cfg |
DMA_CHAN_CFG_DST_LINEAR_MODE |
- DMA_CHAN_CFG_SRC_IO_MODE |
- DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
- DMA_CHAN_CFG_SRC_DRQ(vchan->port);
+ DMA_CHAN_CFG_SRC_IO_MODE;
+ sdev->cfg->set_drq(&v_lli->cfg, vchan->port, DRQ_SDRAM);
}

prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd);
@@ -1055,6 +1057,7 @@ static struct sun6i_dma_config sun6i_a31_dma_cfg = {
.nr_max_requests = 30,
.nr_max_vchans = 53,
.set_burst_length = sun6i_set_burst_length_a31,
+ .set_drq = sun6i_set_drq_a31,
.src_burst_lengths = BIT(1) | BIT(8),
.dst_burst_lengths = BIT(1) | BIT(8),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1076,6 +1079,7 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
.nr_max_vchans = 37,
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
.set_burst_length = sun6i_set_burst_length_a31,
+ .set_drq = sun6i_set_drq_a31,
.src_burst_lengths = BIT(1) | BIT(8),
.dst_burst_lengths = BIT(1) | BIT(8),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1092,6 +1096,7 @@ static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
.nr_max_vchans = 39,
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
.set_burst_length = sun6i_set_burst_length_a31,
+ .set_drq = sun6i_set_drq_a31,
.src_burst_lengths = BIT(1) | BIT(8),
.dst_burst_lengths = BIT(1) | BIT(8),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1115,6 +1120,7 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
.nr_max_vchans = 34,
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
.set_burst_length = sun6i_set_burst_length_h3,
+ .set_drq = sun6i_set_drq_a31,
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1134,6 +1140,7 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
static struct sun6i_dma_config sun50i_a64_dma_cfg = {
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
.set_burst_length = sun6i_set_burst_length_h3,
+ .set_drq = sun6i_set_drq_a31,
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1157,6 +1164,7 @@ static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
.nr_max_vchans = 24,
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
.set_burst_length = sun6i_set_burst_length_a31,
+ .set_drq = sun6i_set_drq_a31,
.src_burst_lengths = BIT(1) | BIT(8),
.dst_burst_lengths = BIT(1) | BIT(8),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1272,8 +1280,8 @@ static int sun6i_dma_probe(struct platform_device *pdev)
ret = of_property_read_u32(np, "dma-requests", &sdc->max_request);
if (ret && !sdc->max_request) {
dev_info(&pdev->dev, "Missing dma-requests, using %u.\n",
- DMA_CHAN_MAX_DRQ);
- sdc->max_request = DMA_CHAN_MAX_DRQ;
+ DMA_CHAN_MAX_DRQ_A31);
+ sdc->max_request = DMA_CHAN_MAX_DRQ_A31;
}

/*
--
2.20.1

Next message: David Miller: "Re: [PATCH 5/6] sparc64: use the generic get_user_pages_fast code"
Previous message: ClÃment PÃron: "[PATCH v2 4/7] dmaengine: sun6i: Add a quirk for setting mode fields"
In reply to: ClÃment PÃron: "[PATCH v2 4/7] dmaengine: sun6i: Add a quirk for setting mode fields"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]