[PATCH net] Documentation: net-sysfs: Remove duplicate PHY device documentation

[Florian Fainelli]

Both sysfs-bus-mdio and sysfs-class-net-phydev contain the same
duplication information. There is not currently any MDIO bus specific
attribute, but there are PHY device (struct phy_device) specific
attributes. Use the more precise description from sysfs-bus-mdio and
carry that over to sysfs-class-net-phydev.

Fixes: 86f22d04dfb5 ("net: sysfs: Document PHY device sysfs attributes")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 Documentation/ABI/testing/sysfs-bus-mdio      | 29 -------------------
 .../ABI/testing/sysfs-class-net-phydev        | 19 ++++++++----
 2 files changed, 13 insertions(+), 35 deletions(-)
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-mdio

diff --git a/Documentation/ABI/testing/sysfs-bus-mdio b/Documentation/ABI/testing/sysfs-bus-mdio
deleted file mode 100644
index 491baaf4285f..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-mdio
+++ /dev/null
@@ -1,29 +0,0 @@
-What:		/sys/bus/mdio_bus/devices/.../phy_id
-Date:		November 2012
-KernelVersion:	3.8
-Contact:	netdev@xxxxxxxxxxxxxxx
-Description:
-		This attribute contains the 32-bit PHY Identifier as reported
-		by the device during bus enumeration, encoded in hexadecimal.
-		This ID is used to match the device with the appropriate
-		driver.
-
-What:		/sys/bus/mdio_bus/devices/.../phy_interface
-Date:		February 2014
-KernelVersion:	3.15
-Contact:	netdev@xxxxxxxxxxxxxxx
-Description:
-		This attribute contains the PHY interface as configured by the
-		Ethernet driver during bus enumeration, encoded in string.
-		This interface mode is used to configure the Ethernet MAC with the
-		appropriate mode for its data lines to the PHY hardware.
-
-What:		/sys/bus/mdio_bus/devices/.../phy_has_fixups
-Date:		February 2014
-KernelVersion:	3.15
-Contact:	netdev@xxxxxxxxxxxxxxx
-Description:
-		This attribute contains the boolean value whether a given PHY
-		device has had any "fixup" workaround running on it, encoded as
-		a boolean. This information is provided to help troubleshooting
-		PHY configurations.
diff --git a/Documentation/ABI/testing/sysfs-class-net-phydev b/Documentation/ABI/testing/sysfs-class-net-phydev
index 6ebabfb27912..2a5723343aba 100644
--- a/Documentation/ABI/testing/sysfs-class-net-phydev
+++ b/Documentation/ABI/testing/sysfs-class-net-phydev
@@ -11,24 +11,31 @@ Date:		February 2014
 KernelVersion:	3.15
 Contact:	netdev@xxxxxxxxxxxxxxx
 Description:
-		Boolean value indicating whether the PHY device has
-		any fixups registered against it (phy_register_fixup)
+		This attribute contains the boolean value whether a given PHY
+		device has had any "fixup" workaround running on it, encoded as
+		a boolean. This information is provided to help troubleshooting
+		PHY configurations.
 
 What:		/sys/class/mdio_bus/<bus>/<device>/phy_id
 Date:		November 2012
 KernelVersion:	3.8
 Contact:	netdev@xxxxxxxxxxxxxxx
 Description:
-		32-bit hexadecimal value corresponding to the PHY device's OUI,
-		model and revision number.
+		This attribute contains the 32-bit PHY Identifier as reported
+		by the device during bus enumeration, encoded in hexadecimal.
+		This ID is used to match the device with the appropriate
+		driver.
 
 What:		/sys/class/mdio_bus/<bus>/<device>/phy_interface
 Date:		February 2014
 KernelVersion:	3.15
 Contact:	netdev@xxxxxxxxxxxxxxx
 Description:
-		String value indicating the PHY interface, possible
-		values are:.
+		This attribute contains the PHY interface as configured by the
+		Ethernet driver during bus enumeration, encoded in string.
+		This interface mode is used to configure the Ethernet MAC with the
+		appropriate mode for its data lines to the PHY hardware.
+		Possible values are:
 		<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
 		rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
 		xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
-- 
2.17.1