linux-next: manual merge of the net-next tree with the net tree

[Stephen Rothwell]

Hi all,

Today's linux-next merge of the net-next tree got a conflict in:

  drivers/net/phy/dp83867.c

between commits:

  2b892649254f ("net: phy: dp83867: Set up RGMII TX delay")
  333061b92453 ("net: phy: dp83867: fix speed 10 in sgmii mode")

from the net tree and commits:

  c11669a2757e ("net: phy: dp83867: Rework delay rgmii delay handling")
  27708eb5481b ("net: phy: dp83867: IO impedance is not dependent on RGMII delay")

from the net-next tree.

I fixed it up (I took a guess - see below) and can carry the fix as
necessary. This is now fixed as far as linux-next is concerned, but any
non trivial conflicts should be mentioned to your upstream maintainer
when your tree is submitted for merging.  You may also want to consider
cooperating with the maintainer of the conflicting tree to minimise any
particularly complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc drivers/net/phy/dp83867.c
index c71c7d0f53f0,3bdf94043693..000000000000
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@@ -26,18 -26,11 +26,19 @@@
  
  /* Extended Registers */
  #define DP83867_CFG4            0x0031
 +#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6))
 +#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS   (3 << 5)
 +#define DP83867_CFG4_SGMII_ANEG_TIMER_800US  (2 << 5)
 +#define DP83867_CFG4_SGMII_ANEG_TIMER_2US    (1 << 5)
 +#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS   (0 << 5)
 +
  #define DP83867_RGMIICTL	0x0032
  #define DP83867_STRAP_STS1	0x006E
+ #define DP83867_STRAP_STS2	0x006f
  #define DP83867_RGMIIDCTL	0x0086
  #define DP83867_IO_MUX_CFG	0x0170
 +#define DP83867_10M_SGMII_CFG   0x016F
 +#define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7)
  
  #define DP83867_SW_RESET	BIT(15)
  #define DP83867_SW_RESTART	BIT(14)
@@@ -255,10 -321,18 +329,17 @@@ static int dp83867_config_init(struct p
  		ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
  		if (ret)
  			return ret;
 -	}
  
 -	/* If rgmii mode with no internal delay is selected, we do NOT use
 -	 * aligned mode as one might expect.  Instead we use the PHY's default
 -	 * based on pin strapping.  And the "mode 0" default is to *use*
 -	 * internal delay with a value of 7 (2.00 ns).
 -	 */
 -	if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
 -	    (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
 +		/* Set up RGMII delays */
++		/* If rgmii mode with no internal delay is selected,
++		 * we do NOT use aligned mode as one might expect.  Instead
++		 * we use the PHY's default based on pin strapping.  And the
++		 * "mode 0" default is to *use* * internal delay with a
++		 * value of 7 (2.00 ns).
++		*/
  		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
  
+ 		val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
  		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
  			val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
  
@@@ -275,41 -349,14 +356,41 @@@
  
  		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL,
  			      delay);
- 
- 		if (dp83867->io_impedance >= 0)
- 			phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
- 				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
- 				       dp83867->io_impedance &
- 				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
  	}
  
+ 	/* If specified, set io impedance */
+ 	if (dp83867->io_impedance >= 0)
+ 		phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
+ 			       DP83867_IO_MUX_CFG_IO_IMPEDANCE_MASK,
+ 			       dp83867->io_impedance);
+ 
 +	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
 +		/* For support SPEED_10 in SGMII mode
 +		 * DP83867_10M_SGMII_RATE_ADAPT bit
 +		 * has to be cleared by software. That
 +		 * does not affect SPEED_100 and
 +		 * SPEED_1000.
 +		 */
 +		ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
 +				     DP83867_10M_SGMII_CFG,
 +				     DP83867_10M_SGMII_RATE_ADAPT_MASK,
 +				     0);
 +		if (ret)
 +			return ret;
 +
 +		/* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5
 +		 * are 01). That is not enough to finalize autoneg on some
 +		 * devices. Increase this timer duration to maximum 16ms.
 +		 */
 +		ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
 +				     DP83867_CFG4,
 +				     DP83867_CFG4_SGMII_ANEG_MASK,
 +				     DP83867_CFG4_SGMII_ANEG_TIMER_16MS);
 +
 +		if (ret)
 +			return ret;
 +	}
 +
  	/* Enable Interrupt output INT_OE in CFG3 register */
  	if (phy_interrupt_is_valid(phydev)) {
  		val = phy_read(phydev, DP83867_CFG3);

Attachment: pgp71WLm41BOl.pgp
Description: OpenPGP digital signature