Re: [PATCH v3 1/1] arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs

[Manivannan Sadhasivam]

On Thu, May 30, 2019 at 08:08:48AM +0800, Jianqun Xu wrote:
> This patch adds core dtsi file for Rockchip RK3399Pro SoCs,
> include rk3399.dtsi. Also enable pciei0/pcie_phy for AP to
> talk to NPU part inside SoC.
> 
> Signed-off-by: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
> ---
> changes since v2:
> - only enable pcie0 and pcie_phy nodes, thanks for Heiko and manivannan
> 
> changes since v1:
> - remove dfi and dmc
> 
>  arch/arm64/boot/dts/rockchip/rk3399pro.dtsi | 22 +++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
> new file mode 100644
> index 000000000000..bb5ebf6608b9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> +
> +#include "rk3399.dtsi"
> +
> +/ {
> +	compatible = "rockchip,rk3399pro";
> +};
> +
> +/* Default to enabled since AP talk to NPU part over pcie */
> +&pcie_phy {
> +	status = "okay";
> +};
> +
> +/* Default to enabled since AP talk to NPU part over pcie */
> +&pcie0 {
> +	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> +	num-lanes = <4>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie_clkreqn_cpm>;

No pinctrl config for ep-gpio? Other than that, it looks good to me.

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Thanks,
Mani
> +	status = "okay";
> +};
> -- 
> 2.17.1
> 
> 
>