Re: [PATCH] HID: hid-logitech-hidpp: detect wireless lightspeed devices

From: Benjamin Tissoires
Date: Tue Jun 04 2019 - 03:06:18 EST


On Mon, Jun 3, 2019 at 11:44 PM Pedro Vanzella <pedro@xxxxxxxxxxxxxxxxx> wrote:
>
> On 05/28, Benjamin Tissoires wrote:
> > On Tue, May 28, 2019 at 6:30 PM Pedro Vanzella <pedro@xxxxxxxxxxxxxxxxx> wrote:
> > >
> > > Send a low device index when the device is connected via the lightspeed
> > > receiver so that the receiver will pass the message along to the device
> > > instead of responding. If we don't do that, we end up thinking it's a
> > > hidpp10 device and miss out on all new features available to newer devices.
> > >
> > > This will enable correct detection of the following models:
> > > G603, GPro, G305, G613, G900 and G903, and possibly others.
> >
> > Thanks for the patch.
> Thanks for reviewing it :)
>
> > However, there is already support for this receiver in Linus' tree:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/hid/hid-logitech-dj.c?id=f5fb57a74e88bd1788f57bf77d587c91d4dc9d57
> >
> > With kernel 5.2-rc1, the connected device should already be handled by
> > hid-logitech-hidpp :)
> Why are the wireless receivers handled by hid-logitech-dj and the wired
> mice handled by hid-logitech-hidpp? They are, in the end, all hidpp
> devices, and having them all handled by the -hidpp driver with a quirk
> class would allow us to check for support for the battery voltage
> feature, as it seems to be an either-or scenario here.

Yep, and this is exactly what is happening:
- the receiver is handled through hid-logitech-dj -> it creates a
virtual HID device for the wireless physical device
- the actual wireless device is handled through hid-logitech-hidpp
(with the virtual HID device created above)

This has the advantage of presenting the wireless device in the same
way the wired device is. From hid-logitech-hidpp point of view, both
are regular HID++ devices.
Also, this makes sure each physical device gets its own product ID (we
are relying on the wireless product ID), meaning that userspace can
differentiate a G900 from a G613 when both are connected to a receiver
with the same product ID.

Hope that helps.

Cheers,
Benjamin


>
> - Pedro
> >
> > Cheers,
> > Benjamin
> >
> > >
> > > Signed-off-by: Pedro Vanzella <pedro@xxxxxxxxxxxxxxxxx>
> > > ---
> > > drivers/hid/hid-logitech-hidpp.c | 10 +++++++++-
> > > 1 file changed, 9 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
> > > index 72fc9c0566db..621fce141d9f 100644
> > > --- a/drivers/hid/hid-logitech-hidpp.c
> > > +++ b/drivers/hid/hid-logitech-hidpp.c
> > > @@ -62,6 +62,7 @@ MODULE_PARM_DESC(disable_tap_to_click,
> > > #define HIDPP_QUIRK_CLASS_K400 BIT(2)
> > > #define HIDPP_QUIRK_CLASS_G920 BIT(3)
> > > #define HIDPP_QUIRK_CLASS_K750 BIT(4)
> > > +#define HIDPP_QUIRK_CLASS_LIGHTSPEED BIT(5)
> > >
> > > /* bits 2..20 are reserved for classes */
> > > /* #define HIDPP_QUIRK_CONNECT_EVENTS BIT(21) disabled */
> > > @@ -236,7 +237,11 @@ static int __hidpp_send_report(struct hid_device *hdev,
> > > * set the device_index as the receiver, it will be overwritten by
> > > * hid_hw_request if needed
> > > */
> > > - hidpp_report->device_index = 0xff;
> > > + if (hidpp->quirks & HIDPP_QUIRK_CLASS_LIGHTSPEED) {
> > > + hidpp_report->device_index = 0x01;
> > > + } else {
> > > + hidpp_report->device_index = 0xff;
> > > + }
> > >
> > > if (hidpp->quirks & HIDPP_QUIRK_FORCE_OUTPUT_REPORTS) {
> > > ret = hid_hw_output_report(hdev, (u8 *)hidpp_report, fields_count);
> > > @@ -3753,6 +3758,9 @@ static const struct hid_device_id hidpp_devices[] = {
> > > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC06B) },
> > > { /* Logitech G900 Gaming Mouse over USB */
> > > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC081) },
> > > + { /* Logitech Gaming Mice over Lightspeed Receiver */
> > > + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC539),
> > > + .driver_data = HIDPP_QUIRK_CLASS_LIGHTSPEED },
> > > { /* Logitech G920 Wheel over USB */
> > > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL),
> > > .driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS},
> > > --
> > > 2.21.0
> > >
>
> --
> Pedro Vanzella
> pedrovanzella.com
> #include <paranoia.h>
> Don't Panic