Re: [PATCH v3 7/8] dmaengine: fsl-edma: add i.mx7ulp edma2 version support

[Vinod Koul]

On 29-05-19, 17:08, yibin.gong@xxxxxxx wrote:
> From: Robin Gong <yibin.gong@xxxxxxx>
> 
>   Add edma2 for i.mx7ulp by version v3, since v2 has already

Why leading spaces at start of line?

> been used by mcf-edma.
> The big changes based on v1 are belows:
> 1. only one dmamux.
> 2. another clock dma_clk except dmamux clk.
> 3. 16 independent interrupts instead of only one interrupt for
> all channels.
> 
> Signed-off-by: Robin Gong <yibin.gong@xxxxxxx>
> ---
>  drivers/dma/fsl-edma-common.c | 18 +++++++++++-
>  drivers/dma/fsl-edma-common.h |  3 ++
>  drivers/dma/fsl-edma.c        | 67 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 87 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> index 45d70d3..0d9915c 100644
> --- a/drivers/dma/fsl-edma-common.c
> +++ b/drivers/dma/fsl-edma-common.c
> @@ -90,6 +90,19 @@ static void mux_configure8(struct fsl_edma_chan *fsl_chan, void __iomem *addr,
>  	iowrite8(val8, addr + off);
>  }
>  
> +void mux_configure32(struct fsl_edma_chan *fsl_chan, void __iomem *addr,
> +		     u32 off, u32 slot, bool enable)
> +{
> +	u32 val;
> +
> +	if (enable)
> +		val = EDMAMUX_CHCFG_ENBL << 24 | slot;
> +	else
> +		val = EDMAMUX_CHCFG_DIS;
> +
> +	iowrite32(val, addr + off * 4);
> +}
> +
>  void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
>  			unsigned int slot, bool enable)
>  {
> @@ -102,7 +115,10 @@ void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
>  	muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
>  	slot = EDMAMUX_CHCFG_SOURCE(slot);
>  
> -	mux_configure8(fsl_chan, muxaddr, ch_off, slot, enable);
> +	if (fsl_chan->edma->version == v3)
> +		mux_configure32(fsl_chan, muxaddr, ch_off, slot, enable);
> +	else
> +		mux_configure8(fsl_chan, muxaddr, ch_off, slot, enable);
>  }
>  EXPORT_SYMBOL_GPL(fsl_edma_chan_mux);
>  
> diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
> index 014ab74..07482d2 100644
> --- a/drivers/dma/fsl-edma-common.h
> +++ b/drivers/dma/fsl-edma-common.h
> @@ -125,6 +125,7 @@ struct fsl_edma_chan {
>  	dma_addr_t			dma_dev_addr;
>  	u32				dma_dev_size;
>  	enum dma_data_direction		dma_dir;
> +	char				chan_name[16];
>  };
>  
>  struct fsl_edma_desc {
> @@ -139,6 +140,7 @@ struct fsl_edma_desc {
>  enum edma_version {
>  	v1, /* 32ch, Vybrid, mpc57x, etc */
>  	v2, /* 64ch Coldfire */
> +	v3, /* 32ch, i.mx7ulp */
>  };
>  
>  struct fsl_edma_drvdata {
> @@ -154,6 +156,7 @@ struct fsl_edma_engine {
>  	void __iomem		*membase;
>  	void __iomem		*muxbase[DMAMUX_NR];
>  	struct clk		*muxclk[DMAMUX_NR];
> +	struct clk		*dmaclk;
>  	u32			dmamux_nr;
>  	struct mutex		fsl_edma_mutex;
>  	const struct fsl_edma_drvdata *drvdata;
> diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
> index cf18301..45b26d6 100644
> --- a/drivers/dma/fsl-edma.c
> +++ b/drivers/dma/fsl-edma.c
> @@ -165,6 +165,51 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
>  	return 0;
>  }
>  
> +static int
> +fsl_edma2_irq_init(struct platform_device *pdev,
> +		   struct fsl_edma_engine *fsl_edma)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	int i, ret, irq;
> +	int count = 0;

Superflous initialization of count!

> +
> +	count = of_irq_count(np);
> +	dev_info(&pdev->dev, "%s Found %d interrupts\r\n", __func__, count);

Consider using debug level..

> +	if (count <= 2) {
> +		dev_err(&pdev->dev, "Interrupts in DTS not correct.\n");
> +		return -EINVAL;
> +	}
> +	/*
> +	 * 16 channel independent interrupts + 1 error interrupt on i.mx7ulp.
> +	 * 2 channel share one interrupt, for example, ch0/ch16, ch1/ch17...
> +	 * For now, just simply request irq without IRQF_SHARED flag, since 16
> +	 * channels are enough on i.mx7ulp whose M4 domain own some peripherals.
> +	 */
> +	for (i = 0; i < count; i++) {
> +		irq = platform_get_irq(pdev, i);
> +		if (irq < 0)
> +			return -ENXIO;
> +
> +		sprintf(fsl_edma->chans[i].chan_name, "eDMA2-CH%02d", i);
> +
> +		/* The last IRQ is for eDMA err */
> +		if (i == count - 1)
> +			ret = devm_request_irq(&pdev->dev, irq,
> +						fsl_edma_err_handler,
> +						0, "eDMA2-ERR", fsl_edma);
> +		else
> +

empty line is waste here

> +			ret = devm_request_irq(&pdev->dev, irq,
> +						fsl_edma_tx_handler, 0,
> +						fsl_edma->chans[i].chan_name,
> +						fsl_edma);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  static void fsl_edma_irq_exit(
>  		struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
>  {
> @@ -191,8 +236,16 @@ static struct fsl_edma_drvdata vf610_data = {
>  	.setup_irq = fsl_edma_irq_init,
>  };
>  
> +static struct fsl_edma_drvdata imx7ulp_data = {
> +	.version = v3,
> +	.dmamuxs = 1,
> +	.has_dmaclk = true,
> +	.setup_irq = fsl_edma2_irq_init,
> +};
> +
>  static const struct of_device_id fsl_edma_dt_ids[] = {
>  	{ .compatible = "fsl,vf610-edma", .data = &vf610_data},
> +	{ .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data},
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, fsl_edma_dt_ids);
> @@ -242,6 +295,20 @@ static int fsl_edma_probe(struct platform_device *pdev)
>  	fsl_edma_setup_regs(fsl_edma);
>  	regs = &fsl_edma->regs;
>  
> +	if (drvdata->has_dmaclk) {
> +		fsl_edma->dmaclk = devm_clk_get(&pdev->dev, "dma");
> +		if (IS_ERR(fsl_edma->dmaclk)) {
> +			dev_err(&pdev->dev, "Missing DMA block clock.\n");
> +			return PTR_ERR(fsl_edma->dmaclk);
> +		}
> +
> +		ret = clk_prepare_enable(fsl_edma->dmaclk);
> +		if (ret) {
> +			dev_err(&pdev->dev, "DMA clk block failed.\n");
> +			return ret;
> +		}
> +	}
> +
>  	for (i = 0; i < fsl_edma->dmamux_nr; i++) {
>  		char clkname[32];
>  
> -- 
> 2.7.4

-- 
~Vinod