Re: [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages

[Andy Shevchenko]

On Thu, May 30, 2019 at 09:33:46PM -0700, Eduardo Valentin wrote:
> From: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>
> 
> Some protocols over I2C are designed for bi-directional transferring
> messages by using I2C Master Write protocol. Like the MCTP (Management
> Component Transport Protocol) and IPMB (Intelligent Platform Management
> Bus), they both require that the userspace can receive messages from
> I2C dirvers under slave mode.
> 
> This new slave mqueue backend is used to receive and queue messages, it
> will exposes these messages to userspace by sysfs bin file.
> 
> Note: DT interface and a couple of minor fixes here and there
> by Eduardo, so I kept the original authorship here.

> +#define MQ_MSGBUF_SIZE		CONFIG_I2C_SLAVE_MQUEUE_MESSAGE_SIZE
> +#define MQ_QUEUE_SIZE		CONFIG_I2C_SLAVE_MQUEUE_QUEUE_SIZE

> +#define MQ_QUEUE_NEXT(x)	(((x) + 1) & (MQ_QUEUE_SIZE - 1))

Also possible ((x + 1) % ..._SIZE)

> +	mq = dev_get_drvdata(container_of(kobj, struct device, kobj));

kobj_to_dev()

> +static int i2c_slave_mqueue_probe(struct i2c_client *client,
> +				  const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct mq_queue *mq;
> +	int ret, i;
> +	void *buf;
> +
> +	mq = devm_kzalloc(dev, sizeof(*mq), GFP_KERNEL);
> +	if (!mq)
> +		return -ENOMEM;
> +

> +	BUILD_BUG_ON(!is_power_of_2(MQ_QUEUE_SIZE));

Perhaps start function with this kind of assertions?

> +
> +	buf = devm_kmalloc_array(dev, MQ_QUEUE_SIZE, MQ_MSGBUF_SIZE,
> +				 GFP_KERNEL);
> +	if (!buf)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < MQ_QUEUE_SIZE; i++)
> +		mq->queue[i].buf = buf + i * MQ_MSGBUF_SIZE;


Just wondering if kfifo API can bring an advantage here?

> +	return 0;
> +}

> +static const struct of_device_id i2c_slave_mqueue_of_match[] = {
> +	{
> +		.compatible = "i2c-slave-mqueue",
> +	},

> +	{ },

No need for comma here.

> +};

> +
> +static struct i2c_driver i2c_slave_mqueue_driver = {
> +	.driver = {
> +		.name	= "i2c-slave-mqueue",

> +		.of_match_table = of_match_ptr(i2c_slave_mqueue_of_match),

Wouldn't compiler warn you due to unused data?
Perhaps drop of_match_ptr() for good...

> +	},
> +	.probe		= i2c_slave_mqueue_probe,
> +	.remove		= i2c_slave_mqueue_remove,
> +	.id_table	= i2c_slave_mqueue_id,
> +};

-- 
With Best Regards,
Andy Shevchenko