Re: [PATCH 6/8] usb: dwc3: qcom: Add support for booting with ACPI

[Lee Jones]

On Tue, 04 Jun 2019, Bjorn Andersson wrote:

> On Tue 04 Jun 03:44 PDT 2019, Lee Jones wrote:
> > diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> [..]
> > @@ -373,7 +416,7 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
> >  
> >  	qcom->num_clocks = count;
> >  
> > -	if (!count)
> > +	if (!count || ACPI_HANDLE(dev))
> >  		return 0;
> 
> Afaict you call this with count = of_count_phandle_with_args(), which
> should be 0. But why not skip calling this at all?

Actually count can be <0, which is why I must have needed it at the
beginning.  There is another patch in this set which checks for
errors, thus the ACPI_HANDLE() call should now be superfluous.  I
will test and remove it.

> >  	qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
> > @@ -409,12 +452,28 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
> >  	return 0;
> >  }
> >  
> > +static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
> > +	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
> > +	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
> > +	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> > +	.hs_phy_irq_index = 1,
> > +	.dp_hs_phy_irq_index = 4,
> > +	.dm_hs_phy_irq_index = 3,
> > +	.ss_phy_irq_index = 2
> > +};
> > +
> > +static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
> > +	{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
> 
> Analog to of_device_get_match_data() there seems to be a
> acpi_device_get_match_data(), if you use this you should be able to
> have you acpi_device_id array next to the of_device_id.

Do you mean "Analogous"?

I will try to group them, thanks.

> > +
> >  static int dwc3_qcom_probe(struct platform_device *pdev)
> 
> It seems that all that's left unconditional on ACPI_HANDLE() in this
> function are the optional pieces and the tail. Wouldn't it be cleaner to
> split it out in different functions?

There are ~50 lines of shared code in dwc3_qcom_probe(), most of it is
interspersed between the configuration table (DT, ACPI) pieces, which
is why it's formatted in the current way.

I can split a few things out into separate functions if you think
it'll help.

-- 
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog