[PATCH v7 1/6] dt-bindings: add binding for USBSS-DRD controller.

[Pawel Laszczak]

This patch aim at documenting USB related dt-bindings for the
Cadence USBSS-DRD controller.

Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

---
 .../devicetree/bindings/usb/cdns-usb3.txt     | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt

diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
new file mode 100644
index 000000000000..1d2b449e3cb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
@@ -0,0 +1,30 @@
+Binding for the Cadence USBSS-DRD controller
+
+Required properties:
+  - reg: Physical base address and size of the controller's register areas.
+	 Controller has 3 different regions:
+	 region 1 - HOST registers area
+	 region 2 - DEVICE registers area
+	 region 3 - OTG/DRD registers area
+  - reg-names - register memory area names:
+	"xhci" - for HOST registers space
+	"dev" - for DEVICE registers space
+	"otg" - for OTG/DRD registers space
+  - compatible: Should contain: "cdns,usb3-1.0.0" or "cdns,usb3-1.0.1"
+  - interrupts: Interrupts used by cdns3 controller.
+
+Optional properties:
+ - maximum-speed : valid arguments are "super-speed", "high-speed" and
+                   "full-speed"; refer to usb/generic.txt
+ - dr_mode: Should be one of "host", "peripheral" or "otg".
+ - phys: reference to the USB PHY
+
+Example:
+	usb@f3000000 {
+		compatible = "cdns,usb3-1.0.1";
+		interrupts = <USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xf3000000 0x10000	/* memory area for HOST registers */
+			0xf3010000 0x10000	/* memory area for DEVICE registers */
+			0xf3020000 0x10000>;	/* memory area for OTG/DRD registers */
+		reg-names = "xhci", "dev", "otg";
+	};
-- 
2.17.1