Re: [PATCHv7 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages

From: Andy Shevchenko
Date: Wed Jun 05 2019 - 13:06:26 EST

On Wed, Jun 5, 2019 at 7:48 PM Eduardo Valentin <eduval@xxxxxxxxxx> wrote:
>
> From: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>
>
> Some protocols over I2C are designed for bi-directional transferring
> messages by using I2C Master Write protocol. Like the MCTP (Management
> Component Transport Protocol) and IPMB (Intelligent Platform Management
> Bus), they both require that the userspace can receive messages from
> I2C dirvers under slave mode.
>
> This new slave mqueue backend is used to receive and queue messages, it
> will exposes these messages to userspace by sysfs bin file.
>
> Note: DT interface and a couple of minor fixes here and there
> by Eduardo, so I kept the original authorship here.

FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

though I prefer simple dropping of of_match_ptr(), and by the way,
#include <of.h> is superfluous and may be changed to
mod_devicetable.h.

Leave above to Wolfram to judge.

> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
> Cc: linux-i2c@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>
> Signed-off-by: Eduardo Valentin <eduval@xxxxxxxxxx>
> ---
>
> From V6 -> V7:
> - fixed compile warm when CONFIG_OF=n by wrapping of table into ifdef
> - minor changes: kobj_to_dev(), moved BUILD_BUG_ON() to start of function,
> and flagged DT table sentinel in a more strict way.
> - Also added a MODULE_DEVICE_TABLE() for the of table.
>
> Documentation/i2c/slave-mqueue-backend.rst | 124 ++++++++++++
> MAINTAINERS | 8 +
> drivers/i2c/Kconfig | 25 +++
> drivers/i2c/Makefile | 1 +
> drivers/i2c/i2c-slave-mqueue.c | 215 +++++++++++++++++++++
> 5 files changed, 373 insertions(+)
> create mode 100644 Documentation/i2c/slave-mqueue-backend.rst
> create mode 100644 drivers/i2c/i2c-slave-mqueue.c
>
> diff --git a/Documentation/i2c/slave-mqueue-backend.rst b/Documentation/i2c/slave-mqueue-backend.rst
> new file mode 100644
> index 000000000000..376dff998fa3
> --- /dev/null
> +++ b/Documentation/i2c/slave-mqueue-backend.rst
> @@ -0,0 +1,124 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=====================================
> +Linux I2C slave message queue backend
> +=====================================
> +
> +:Author: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>
> +
> +Some protocols over I2C/SMBus are designed for bi-directional transferring
> +messages by using I2C Master Write protocol. This requires that both sides
> +of the communication have slave addresses.
> +
> +Like MCTP (Management Component Transport Protocol) and IPMB (Intelligent
> +Platform Management Bus), they both require that the userspace can receive
> +messages from i2c drivers under slave mode.
> +
> +This I2C slave mqueue (message queue) backend is used to receive and queue
> +messages from the remote i2c intelligent device; and it will add the target
> +slave address (with R/W# bit is always 0) into the message at the first byte,
> +so that userspace can use this byte to dispatch the messages into different
> +handling modules. Also, like IPMB, the address byte is in its message format,
> +it needs it to do checksum.
> +
> +For messages are time related, so this backend will flush the oldest message
> +to queue the newest one.
> +
> +Link
> +----
> +`Intelligent Platform Management Bus
> +Communications Protocol Specification
> +<https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmp-spec-v1.0.pdf>`_
> +
> +`Management Component Transport Protocol (MCTP)
> +SMBus/I2C Transport Binding Specification
> +<https://www.dmtf.org/sites/default/files/standards/documents/DSP0237_1.1.0.pdf>`_
> +
> +How to use
> +----------
> +For example, the I2C5 bus has slave address 0x10, the below command will create
> +the related message queue interface:
> +
> + echo slave-mqueue 0x1010 > /sys/bus/i2c/devices/i2c-5/new_device
> +
> +Then you can dump the messages like this:
> +
> + hexdump -C /sys/bus/i2c/devices/5-1010/slave-mqueue
> +
> +Code Example
> +------------
> +*Note: call 'lseek' before 'read', this is a requirement from kernfs' design.*
> +
> +::
> +
> + #include <sys/types.h>
> + #include <sys/stat.h>
> + #include <unistd.h>
> + #include <poll.h>
> + #include <time.h>
> + #include <fcntl.h>
> + #include <stdio.h>
> +
> + int main(int argc, char *argv[])
> + {
> + int i, r;
> + struct pollfd pfd;
> + struct timespec ts;
> + unsigned char data[256];
> +
> + pfd.fd = open(argv[1], O_RDONLY | O_NONBLOCK);
> + if (pfd.fd < 0)
> + return -1;
> +
> + pfd.events = POLLPRI;
> +
> + while (1) {
> + r = poll(&pfd, 1, 5000);
> +
> + if (r < 0)
> + break;
> +
> + if (r == 0 || !(pfd.revents & POLLPRI))
> + continue;
> +
> + lseek(pfd.fd, 0, SEEK_SET);
> + r = read(pfd.fd, data, sizeof(data));
> + if (r <= 0)
> + continue;
> +
> + clock_gettime(CLOCK_MONOTONIC, &ts);
> + printf("[%ld.%.9ld] :", ts.tv_sec, ts.tv_nsec);
> + for (i = 0; i < r; i++)
> + printf(" %02x", data[i]);
> + printf("\n");
> + }
> +
> + close(pfd.fd);
> +
> + return 0;
> + }
> +
> +Result
> +------
> +*./a.out "/sys/bus/i2c/devices/5-1010/slave-mqueue"*
> +
> +::
> +
> + [10183.232500449] : 20 18 c8 2c 78 01 5b
> + [10183.479358348] : 20 18 c8 2c 78 01 5b
> + [10183.726556812] : 20 18 c8 2c 78 01 5b
> + [10183.972605863] : 20 18 c8 2c 78 01 5b
> + [10184.220124772] : 20 18 c8 2c 78 01 5b
> + [10184.467764166] : 20 18 c8 2c 78 01 5b
> + [10193.233421784] : 20 18 c8 2c 7c 01 57
> + [10193.480273460] : 20 18 c8 2c 7c 01 57
> + [10193.726788733] : 20 18 c8 2c 7c 01 57
> + [10193.972781945] : 20 18 c8 2c 7c 01 57
> + [10194.220487360] : 20 18 c8 2c 7c 01 57
> + [10194.468089259] : 20 18 c8 2c 7c 01 57
> + [10203.233433099] : 20 18 c8 2c 80 01 53
> + [10203.481058715] : 20 18 c8 2c 80 01 53
> + [10203.727610472] : 20 18 c8 2c 80 01 53
> + [10203.974044856] : 20 18 c8 2c 80 01 53
> + [10204.220734634] : 20 18 c8 2c 80 01 53
> + [10204.468461664] : 20 18 c8 2c 80 01 53
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a6954776a37e..4bfca09a5f68 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7458,6 +7458,14 @@ L: linux-i2c@xxxxxxxxxxxxxxx
> S: Maintained
> F: drivers/i2c/i2c-stub.c
>
> +I2C SLAVE MQUEUE DRIVER
> +M: Eduardo Valentin <eduval@xxxxxxxxxx>
> +L: linux-i2c@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: drivers/i2c/i2c-slave-mqueue.c
> +F: Documentation/i2c/slave-mqueue-backend.rst
> +F: Documentation/devicetree/bindings/i2c/i2c-slave-mqueue.txt
> +
> I3C SUBSYSTEM
> M: Boris Brezillon <bbrezillon@xxxxxxxxxx>
> L: linux-i3c@xxxxxxxxxxxxxxxxxxx
> diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
> index abedd55a1264..f335924936ae 100644
> --- a/drivers/i2c/Kconfig
> +++ b/drivers/i2c/Kconfig
> @@ -119,6 +119,31 @@ if I2C_SLAVE
> config I2C_SLAVE_EEPROM
> tristate "I2C eeprom slave driver"
>
> +config I2C_SLAVE_MQUEUE
> + tristate "I2C mqueue (message queue) slave driver"
> + help
> + Some protocols over I2C are designed for bi-directional transferring
> + messages by using I2C Master Write protocol. This driver is used to
> + receive and queue messages from the remote I2C device.
> +
> + Userspace can get the messages by reading sysfs file that this driver
> + exposes.
> +
> + This support is also available as a module. If so, the module will be
> + called i2c-slave-mqueue.
> +
> +config I2C_SLAVE_MQUEUE_MESSAGE_SIZE
> + int "The message size of I2C mqueue slave"
> + depends on I2C_SLAVE_MQUEUE
> + default 120
> +
> +config I2C_SLAVE_MQUEUE_QUEUE_SIZE
> + int "The queue size of I2C mqueue slave"
> + depends on I2C_SLAVE_MQUEUE
> + default 32
> + help
> + This number MUST be power of 2.
> +
> endif
>
> config I2C_DEBUG_CORE
> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
> index bed6ba63c983..9a31bc75a446 100644
> --- a/drivers/i2c/Makefile
> +++ b/drivers/i2c/Makefile
> @@ -16,5 +16,6 @@ obj-$(CONFIG_I2C_MUX) += i2c-mux.o
> obj-y += algos/ busses/ muxes/
> obj-$(CONFIG_I2C_STUB) += i2c-stub.o
> obj-$(CONFIG_I2C_SLAVE_EEPROM) += i2c-slave-eeprom.o
> +obj-$(CONFIG_I2C_SLAVE_MQUEUE) += i2c-slave-mqueue.o
>
> ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
> diff --git a/drivers/i2c/i2c-slave-mqueue.c b/drivers/i2c/i2c-slave-mqueue.c
> new file mode 100644
> index 000000000000..c17c4911928f
> --- /dev/null
> +++ b/drivers/i2c/i2c-slave-mqueue.c
> @@ -0,0 +1,215 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2017 - 2018, Intel Corporation.
> +
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/sysfs.h>
> +
> +#define MQ_MSGBUF_SIZE CONFIG_I2C_SLAVE_MQUEUE_MESSAGE_SIZE
> +#define MQ_QUEUE_SIZE CONFIG_I2C_SLAVE_MQUEUE_QUEUE_SIZE
> +#define MQ_QUEUE_NEXT(x) (((x) + 1) & (MQ_QUEUE_SIZE - 1))
> +
> +struct mq_msg {
> + int len;
> + u8 *buf;
> +};
> +
> +struct mq_queue {
> + struct bin_attribute bin;
> + struct kernfs_node *kn;
> +
> + spinlock_t lock; /* spinlock for queue index handling */
> + int in;
> + int out;
> +
> + struct mq_msg *curr;
> + int truncated; /* drop current if truncated */
> + struct mq_msg queue[MQ_QUEUE_SIZE];
> +};
> +
> +static int i2c_slave_mqueue_callback(struct i2c_client *client,
> + enum i2c_slave_event event, u8 *val)
> +{
> + struct mq_queue *mq = i2c_get_clientdata(client);
> + struct mq_msg *msg = mq->curr;
> + int ret = 0;
> +
> + switch (event) {
> + case I2C_SLAVE_WRITE_REQUESTED:
> + mq->truncated = 0;
> +
> + msg->len = 1;
> + msg->buf[0] = client->addr << 1;
> + break;
> +
> + case I2C_SLAVE_WRITE_RECEIVED:
> + if (msg->len < MQ_MSGBUF_SIZE) {
> + msg->buf[msg->len++] = *val;
> + } else {
> + dev_err(&client->dev, "message is truncated!\n");
> + mq->truncated = 1;
> + ret = -EINVAL;
> + }
> + break;
> +
> + case I2C_SLAVE_STOP:
> + if (unlikely(mq->truncated || msg->len < 2))
> + break;
> +
> + spin_lock(&mq->lock);
> + mq->in = MQ_QUEUE_NEXT(mq->in);
> + mq->curr = &mq->queue[mq->in];
> + mq->curr->len = 0;
> +
> + /* Flush the oldest message */
> + if (mq->out == mq->in)
> + mq->out = MQ_QUEUE_NEXT(mq->out);
> + spin_unlock(&mq->lock);
> +
> + kernfs_notify(mq->kn);
> + break;
> +
> + default:
> + *val = 0xFF;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static ssize_t i2c_slave_mqueue_bin_read(struct file *filp,
> + struct kobject *kobj,
> + struct bin_attribute *attr,
> + char *buf, loff_t pos, size_t count)
> +{
> + struct mq_queue *mq;
> + struct mq_msg *msg;
> + unsigned long flags;
> + bool more = false;
> + ssize_t ret = 0;
> +
> + mq = dev_get_drvdata(kobj_to_dev(kobj));
> +
> + spin_lock_irqsave(&mq->lock, flags);
> + if (mq->out != mq->in) {
> + msg = &mq->queue[mq->out];
> +
> + if (msg->len <= count) {
> + ret = msg->len;
> + memcpy(buf, msg->buf, ret);
> + } else {
> + ret = -EOVERFLOW; /* Drop this HUGE one. */
> + }
> +
> + mq->out = MQ_QUEUE_NEXT(mq->out);
> + if (mq->out != mq->in)
> + more = true;
> + }
> + spin_unlock_irqrestore(&mq->lock, flags);
> +
> + if (more)
> + kernfs_notify(mq->kn);
> +
> + return ret;
> +}
> +
> +static int i2c_slave_mqueue_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct mq_queue *mq;
> + int ret, i;
> + void *buf;
> +
> + BUILD_BUG_ON(!is_power_of_2(MQ_QUEUE_SIZE));
> +
> + mq = devm_kzalloc(dev, sizeof(*mq), GFP_KERNEL);
> + if (!mq)
> + return -ENOMEM;
> +
> + buf = devm_kmalloc_array(dev, MQ_QUEUE_SIZE, MQ_MSGBUF_SIZE,
> + GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + for (i = 0; i < MQ_QUEUE_SIZE; i++)
> + mq->queue[i].buf = buf + i * MQ_MSGBUF_SIZE;
> +
> + i2c_set_clientdata(client, mq);
> +
> + spin_lock_init(&mq->lock);
> + mq->curr = &mq->queue[0];
> +
> + sysfs_bin_attr_init(&mq->bin);
> + mq->bin.attr.name = "slave-mqueue";
> + mq->bin.attr.mode = 0400;
> + mq->bin.read = i2c_slave_mqueue_bin_read;
> + mq->bin.size = MQ_MSGBUF_SIZE * MQ_QUEUE_SIZE;
> +
> + ret = sysfs_create_bin_file(&dev->kobj, &mq->bin);
> + if (ret)
> + return ret;
> +
> + mq->kn = kernfs_find_and_get(dev->kobj.sd, mq->bin.attr.name);
> + if (!mq->kn) {
> + sysfs_remove_bin_file(&dev->kobj, &mq->bin);
> + return -EFAULT;
> + }
> +
> + ret = i2c_slave_register(client, i2c_slave_mqueue_callback);
> + if (ret) {
> + kernfs_put(mq->kn);
> + sysfs_remove_bin_file(&dev->kobj, &mq->bin);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int i2c_slave_mqueue_remove(struct i2c_client *client)
> +{
> + struct mq_queue *mq = i2c_get_clientdata(client);
> +
> + i2c_slave_unregister(client);
> +
> + kernfs_put(mq->kn);
> + sysfs_remove_bin_file(&client->dev.kobj, &mq->bin);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id i2c_slave_mqueue_id[] = {
> + { "slave-mqueue", 0 },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, i2c_slave_mqueue_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id i2c_slave_mqueue_of_match[] = {
> + {
> + .compatible = "i2c-slave-mqueue",
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, i2c_slave_mqueue_of_match);
> +#endif
> +
> +static struct i2c_driver i2c_slave_mqueue_driver = {
> + .driver = {
> + .name = "i2c-slave-mqueue",
> + .of_match_table = of_match_ptr(i2c_slave_mqueue_of_match),
> + },
> + .probe = i2c_slave_mqueue_probe,
> + .remove = i2c_slave_mqueue_remove,
> + .id_table = i2c_slave_mqueue_id,
> +};
> +module_i2c_driver(i2c_slave_mqueue_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("I2C slave mode for receiving and queuing messages");
> --
> 2.21.0
>


--
With Best Regards,
Andy Shevchenko