Re: [PATCH v4 2/2] arm64: dts: qcom: Add Lenovo Miix 630

From: Lee Jones
Date: Thu Jun 06 2019 - 01:54:44 EST

Next message: John Hubbard: "Re: [PATCH RFC 00/10] RDMA/FS DAX truncate proposal"
Previous message: Tudor.Ambarus: "Re: [PATCH] mtd: spi-nor: Add prep/unprep for spi_nor_resume"
Next in thread: Bjorn Andersson: "Re: [PATCH v4 2/2] arm64: dts: qcom: Add Lenovo Miix 630"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 23 Apr 2019, Jeffrey Hugo wrote:

> This adds the initial DT for the Lenovo Miix 630 laptop. Supported
> functionality includes USB (host), microSD-card, keyboard, and trackpad.
>
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/msm8998-clamshell.dtsi | 278 ++++++++++++++++++
> .../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 30 ++

What's happening with this patch?

It's been on the list a while now. I'm waiting for it to be accepted,
since there are patches I wish to submit which are based on it.

Who is responsible for merging these?

> 3 files changed, 309 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 21d548f02d39..c3e4307bcbd4 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
> new file mode 100644
> index 000000000000..1a341d4b1597
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
> @@ -0,0 +1,278 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
> +
> +/*
> + * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630,
> + * Asus NovaGo TP370QL, and HP Envy x2. All three devices are basically the
> + * same, with differences in peripherals.
> + */
> +
> +#include "msm8998.dtsi"
> +#include "pm8998.dtsi"
> +#include "pm8005.dtsi"
> +
> +/ {
> + chosen {
> + };
> +
> + thermal-zones {
> + battery-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens0 0>;
> +
> + trips {
> + battery_crit: trip0 {
> + temperature = <60000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + skin-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens1 5>;
> +
> + trips {
> + skin_alert: trip0 {
> + temperature = <44000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + skip_crit: trip1 {
> + temperature = <70000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&qusb2phy {
> + status = "okay";
> +
> + vdda-pll-supply = <&vreg_l12a_1p8>;
> + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
> +};
> +
> +&rpm_requests {
> + pm8998-regulators {
> + compatible = "qcom,rpm-pm8998-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_s2-supply = <&vph_pwr>;
> + vdd_s3-supply = <&vph_pwr>;
> + vdd_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s6-supply = <&vph_pwr>;
> + vdd_s7-supply = <&vph_pwr>;
> + vdd_s8-supply = <&vph_pwr>;
> + vdd_s9-supply = <&vph_pwr>;
> + vdd_s10-supply = <&vph_pwr>;
> + vdd_s11-supply = <&vph_pwr>;
> + vdd_s12-supply = <&vph_pwr>;
> + vdd_s13-supply = <&vph_pwr>;
> + vdd_l1_l27-supply = <&vreg_s7a_1p025>;
> + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
> + vdd_l3_l11-supply = <&vreg_s7a_1p025>;
> + vdd_l4_l5-supply = <&vreg_s7a_1p025>;
> + vdd_l6-supply = <&vreg_s5a_2p04>;
> + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
> + vdd_l9-supply = <&vph_pwr>;
> + vdd_l10_l23_l25-supply = <&vph_pwr>;
> + vdd_l13_l19_l21-supply = <&vph_pwr>;
> + vdd_l16_l28-supply = <&vph_pwr>;
> + vdd_l18_l22-supply = <&vph_pwr>;
> + vdd_l20_l24-supply = <&vph_pwr>;
> + vdd_l26-supply = <&vreg_s3a_1p35>;
> + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
> +
> + vreg_s3a_1p35: s3 {
> + regulator-min-microvolt = <1352000>;
> + regulator-max-microvolt = <1352000>;
> + };
> + vreg_s4a_1p8: s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-allow-set-load;
> + };
> + vreg_s5a_2p04: s5 {
> + regulator-min-microvolt = <1904000>;
> + regulator-max-microvolt = <2040000>;
> + };
> + vreg_s7a_1p025: s7 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1028000>;
> + };
> + vreg_l1a_0p875: l1 {
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-allow-set-load;
> + };
> + vreg_l2a_1p2: l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-allow-set-load;
> + };
> + vreg_l3a_1p0: l3 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> + vreg_l5a_0p8: l5 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <800000>;
> + };
> + vreg_l6a_1p8: l6 {
> + regulator-min-microvolt = <1808000>;
> + regulator-max-microvolt = <1808000>;
> + };
> + vreg_l7a_1p8: l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + vreg_l8a_1p2: l8 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> + vreg_l9a_1p8: l9 {
> + regulator-min-microvolt = <1808000>;
> + regulator-max-microvolt = <2960000>;
> + };
> + vreg_l10a_1p8: l10 {
> + regulator-min-microvolt = <1808000>;
> + regulator-max-microvolt = <2960000>;
> + };
> + vreg_l11a_1p0: l11 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> + vreg_l12a_1p8: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + vreg_l13a_2p95: l13 {
> + regulator-min-microvolt = <1808000>;
> + regulator-max-microvolt = <2960000>;
> + };
> + vreg_l14a_1p88: l14 {
> + regulator-min-microvolt = <1880000>;
> + regulator-max-microvolt = <1880000>;
> + };
> + vreg_15a_1p8: l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + vreg_l16a_2p7: l16 {
> + regulator-min-microvolt = <2704000>;
> + regulator-max-microvolt = <2704000>;
> + };
> + vreg_l17a_1p3: l17 {
> + regulator-min-microvolt = <1304000>;
> + regulator-max-microvolt = <1304000>;
> + };
> + vreg_l18a_2p7: l18 {
> + regulator-min-microvolt = <2704000>;
> + regulator-max-microvolt = <2704000>;
> + };
> + vreg_l19a_3p0: l19 {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + };
> + vreg_l20a_2p95: l20 {
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-allow-set-load;
> + };
> + vreg_l21a_2p95: l21 {
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-allow-set-load;
> + regulator-system-load = <800000>;
> + };
> + vreg_l22a_2p85: l22 {
> + regulator-min-microvolt = <2864000>;
> + regulator-max-microvolt = <2864000>;
> + };
> + vreg_l23a_3p3: l23 {
> + regulator-min-microvolt = <3312000>;
> + regulator-max-microvolt = <3312000>;
> + };
> + vreg_l24a_3p075: l24 {
> + regulator-min-microvolt = <3088000>;
> + regulator-max-microvolt = <3088000>;
> + };
> + vreg_l25a_3p3: l25 {
> + regulator-min-microvolt = <3104000>;
> + regulator-max-microvolt = <3312000>;
> + };
> + vreg_l26a_1p2: l26 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> + vreg_l28_3p0: l28 {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + };
> +
> + vreg_lvs1a_1p8: lvs1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vreg_lvs2a_1p8: lvs2 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + };
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <0 4>, <81 4>;
> +
> + touchpad: touchpad {
> + config {
> + pins = "gpio123";
> + bias-pull-up; /* pull up */
> + };
> + };
> +};
> +
> +&sdhc2 {
> + status = "okay";
> +
> + vmmc-supply = <&vreg_l21a_2p95>;
> + vqmmc-supply = <&vreg_l13a_2p95>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb3_dwc3 {
> + dr_mode = "host"; /* Force to host until we have Type-C hooked up */
> +};
> +
> +&usb3phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l1a_0p875>;
> + vdda-pll-supply = <&vreg_l2a_1p2>;
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> new file mode 100644
> index 000000000000..407c6a32911c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
> +
> +/dts-v1/;
> +
> +#include "msm8998-clamshell.dtsi"
> +
> +/ {
> + model = "Lenovo Miix 630";
> + compatible = "lenovo,miix-630", "qcom,msm8998";
> +};
> +
> +&blsp1_i2c6 {
> + status = "okay";
> +
> + keyboard@3a {
> + compatible = "hid-over-i2c";
> + interrupt-parent = <&tlmm>;
> + interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;
> + reg = <0x3a>;
> + hid-descr-addr = <0x0001>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&touchpad>;
> + };
> +};
> +
> +&sdhc2 {
> + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
> +};

--
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Next message: John Hubbard: "Re: [PATCH RFC 00/10] RDMA/FS DAX truncate proposal"
Previous message: Tudor.Ambarus: "Re: [PATCH] mtd: spi-nor: Add prep/unprep for spi_nor_resume"
Next in thread: Bjorn Andersson: "Re: [PATCH v4 2/2] arm64: dts: qcom: Add Lenovo Miix 630"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]