Re: [PATCH v8 02/13] clk: samsung: add new clocks for DMC for Exynos5422 SoC

[Krzysztof Kozlowski]

On Wed, 5 Jun 2019 at 18:54, Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> wrote:
>
> This patch provides support for clocks needed for Dynamic Memory Controller
> in Exynos5422 SoC. It adds CDREX base register addresses, new DIV, MUX and
> GATE entries.
>
> Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/clk/samsung/clk-exynos5420.c | 57 ++++++++++++++++++++++++++--
>  1 file changed, 53 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 34cce3c5898f..eecbfcc6b3cf 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -134,6 +134,8 @@
>  #define SRC_CDREX              0x20200
>  #define DIV_CDREX0             0x20500
>  #define DIV_CDREX1             0x20504
> +#define GATE_BUS_CDREX0                0x20700
> +#define GATE_BUS_CDREX1                0x20704
>  #define KPLL_LOCK              0x28000
>  #define KPLL_CON0              0x28100
>  #define SRC_KFC                        0x28200
> @@ -248,6 +250,8 @@ static const unsigned long exynos5x_clk_regs[] __initconst = {
>         DIV_CDREX1,
>         SRC_KFC,
>         DIV_KFC0,
> +       GATE_BUS_CDREX0,
> +       GATE_BUS_CDREX1,
>  };
>
>  static const unsigned long exynos5800_clk_regs[] __initconst = {
> @@ -425,6 +429,9 @@ PNAME(mout_group13_5800_p)  = { "dout_osc_div", "mout_sw_aclkfl1_550_cam" };
>  PNAME(mout_group14_5800_p)     = { "dout_aclk550_cam", "dout_sclk_sw" };
>  PNAME(mout_group15_5800_p)     = { "dout_osc_div", "mout_sw_aclk550_cam" };
>  PNAME(mout_group16_5800_p)     = { "dout_osc_div", "mout_mau_epll_clk" };
> +PNAME(mout_mx_mspll_ccore_phy_p) = { "sclk_bpll", "mout_sclk_dpll",
> +                                       "mout_sclk_mpll", "ff_dout_spll2",
> +                                       "mout_sclk_spll", "mout_sclk_epll"};
>
>  /* fixed rate clocks generated outside the soc */
>  static struct samsung_fixed_rate_clock
> @@ -450,7 +457,7 @@ static const struct samsung_fixed_factor_clock
>  static const struct samsung_fixed_factor_clock
>                 exynos5800_fixed_factor_clks[] __initconst = {
>         FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0),
> -       FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
> +       FFACTOR(CLK_FF_DOUT_SPLL2, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
>  };
>
>  static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
> @@ -472,11 +479,14 @@ static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
>         MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
>         MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
>
> +       MUX(CLK_MOUT_MX_MSPLL_CCORE_PHY, "mout_mx_mspll_ccore_phy",
> +               mout_mx_mspll_ccore_phy_p, SRC_TOP7, 0, 3),
> +
>         MUX(CLK_MOUT_MX_MSPLL_CCORE, "mout_mx_mspll_ccore",
> -                       mout_mx_mspll_ccore_p, SRC_TOP7, 16, 2),
> +                       mout_mx_mspll_ccore_p, SRC_TOP7, 16, 3),
>         MUX_F(CLK_MOUT_MAU_EPLL, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p,
>                         SRC_TOP7, 20, 2, CLK_SET_RATE_PARENT, 0),
> -       MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
> +       MUX(CLK_SCLK_BPLL, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
>         MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
>
>         MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3),
> @@ -648,7 +658,7 @@ static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
>
>         MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1),
>         MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1),
> -       MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
> +       MUX(CLK_MOUT_SCLK_SPLL, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
>         MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
>         MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
>         MUX_F(CLK_MOUT_EPLL, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1,
> @@ -806,8 +816,21 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = {
>                         "mout_aclk400_disp1", DIV_TOP2, 4, 3),
>
>         /* CDREX Block */
> +       /*
> +        * The three clocks below are controlled using the same register and
> +        * bits. They are put into one because there is a need of
> +        * synchronization between the BUS and DREXs (two external memory
> +        * interfaces).
> +        * They are put here to show this HW assumption and for clock
> +        * information summary completeness.
> +        */
>         DIV(CLK_DOUT_PCLK_CDREX, "dout_pclk_cdrex", "dout_aclk_cdrex1",
>                         DIV_CDREX0, 28, 3),
> +       DIV(CLK_DOUT_PCLK_DREX0, "dout_pclk_drex0", "dout_cclk_drex0",
> +                       DIV_CDREX0, 28, 3),
> +       DIV(CLK_DOUT_PCLK_DREX1, "dout_pclk_drex1", "dout_cclk_drex0",
> +                       DIV_CDREX0, 28, 3),

Offline discussion with Marek and Sylwester suggested to add NOCACHE
for the two clocks using the same bits. Otherwise I am fine:

Acked-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

Best regards,
Krzysztof