Re: [PATCH 01/16] firmware: ti_sci: Add resource management APIs for ringacc, psi-l and udma
From: Peter Ujfalusi
Date: Thu Jun 06 2019 - 08:08:42 EST
Hi Lokesh,
On 06/06/2019 9.00, Lokesh Vutla wrote:
> Hi Peter,
>
> On 06/05/19 6:04 PM, Peter Ujfalusi wrote:
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>
> Patch has the following checkpatch warnings and checks which can be fixed:
>
> WARNING: Missing commit description - Add an appropriate one
How did I missed it?
> CHECK: Lines should not end with a '('
> #262: FILE: drivers/firmware/ti_sci.c:2286:
> +static int ti_sci_cmd_rm_udmap_tx_ch_cfg(
>
> CHECK: Lines should not end with a '('
> #323: FILE: drivers/firmware/ti_sci.c:2347:
> +static int ti_sci_cmd_rm_udmap_rx_ch_cfg(
>
> CHECK: Lines should not end with a '('
> #383: FILE: drivers/firmware/ti_sci.c:2407:
> +static int ti_sci_cmd_rm_udmap_rx_flow_cfg1(
>
> CHECK: Lines should not end with a '('
> #1414: FILE: include/linux/soc/ti/ti_sci_protocol.h:455:
> + int (*rx_flow_cfg)(
>
> total: 0 errors, 2 warnings, 4 checks, 1399 lines checked
There must be a reason why these left, but I will take another look.
>> ---
>> drivers/firmware/ti_sci.c | 439 +++++++++++++++
>> drivers/firmware/ti_sci.h | 704 +++++++++++++++++++++++++
>> include/linux/soc/ti/ti_sci_protocol.h | 216 ++++++++
>> 3 files changed, 1359 insertions(+)
>>
>> diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
>> index 64d895b80bc3..af3ebcdeab18 100644
>> --- a/drivers/firmware/ti_sci.c
>> +++ b/drivers/firmware/ti_sci.c
>
> [..snip.]
>
>> +}
>> +
>> +static int ti_sci_cmd_rm_psil_pair(const struct ti_sci_handle *handle,
>> + u32 nav_id, u32 src_thread, u32 dst_thread)
>> +{
>
> All the psil ops doesn't have the kernel-doc function comments. Just be
> consistent with other functions :)
OK.
>> + struct ti_sci_msg_hdr *resp;
>> + struct ti_sci_msg_psil_pair *req;
>> + struct ti_sci_xfer *xfer;
>> + struct ti_sci_info *info;
>> + struct device *dev;
>> + int ret = 0;
>> +
>> + if (IS_ERR(handle))
>> + return PTR_ERR(handle);
>> + if (!handle)
>> + return -EINVAL;
>> +
>> + info = handle_to_ti_sci_info(handle);
>> + dev = info->dev;
>> +
>> + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_PSIL_PAIR,
>> + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
>> + sizeof(*req), sizeof(*resp));
>> + if (IS_ERR(xfer)) {
>> + ret = PTR_ERR(xfer);
>> + dev_err(dev, "RM_PSIL:Message reconfig failed(%d)\n", ret);
>> + return ret;
>> + }
>> + req = (struct ti_sci_msg_psil_pair *)xfer->xfer_buf;
>> + req->nav_id = nav_id;
>> + req->src_thread = src_thread;
>> + req->dst_thread = dst_thread;
>> +
>> + ret = ti_sci_do_xfer(info, xfer);
>> + if (ret) {
>> + dev_err(dev, "RM_PSIL:Mbox send fail %d\n", ret);
>> + goto fail;
>> + }
>> +
>> + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
>> + ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
>> +
>> +fail:
>> + ti_sci_put_one_xfer(&info->minfo, xfer);
>> +
>> + return ret;
>> +}
>> +
>
> [..snip..]
>
>> + */
>> +struct ti_sci_msg_rm_ring_cfg_req {
>> + struct ti_sci_msg_hdr hdr;
>> + u32 valid_params;
>> + u16 nav_id;
>> + u16 index;
>> + u32 addr_lo;
>> + u32 addr_hi;
>> + u32 count;
>> + u8 mode;
>> + u8 size;
>> + u8 order_id;
>> +} __packed;
>> +
>> +/**
>> + * struct ti_sci_msg_rm_ring_cfg_resp - Response to configuring a ring.
>> + *
>> + * @hdr: Generic Header
>> + */
>> +struct ti_sci_msg_rm_ring_cfg_resp {
>> + struct ti_sci_msg_hdr hdr;
>> +} __packed;
>
> If it is a generic ACK, NACK response, just use the header directly.
Sure, I'll fix it and other places if any.
>
> [..snip..]
>
>> + */
>> +struct ti_sci_msg_rm_udmap_rx_ch_cfg_req {
>> + struct ti_sci_msg_hdr hdr;
>> + u32 valid_params;
>> + u16 nav_id;
>> + u16 index;
>> + u16 rx_fetch_size;
>> + u16 rxcq_qnum;
>> + u8 rx_priority;
>> + u8 rx_qos;
>> + u8 rx_orderid;
>> + u8 rx_sched_priority;
>> + u16 flowid_start;
>> + u16 flowid_cnt;
>> + u8 rx_pause_on_err;
>> + u8 rx_atype;
>> + u8 rx_chan_type;
>> + u8 rx_ignore_short;
>> + u8 rx_ignore_long;
>> + u8 rx_burst_size;
>> +
>
> extra line?
Will remove it.
>
>> +} __packed;
>> +
>> +/**
>
>
> Thanks and regards,
> Lokesh
>
Thanks,
- PÃter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki