Re: [PATCH v2 for 5.2 08/12] rseq/selftests: arm: use udf instruction for RSEQ_SIG

[Mathieu Desnoyers]

----- On May 3, 2019, at 3:38 PM, Mathieu Desnoyers mathieu.desnoyers@xxxxxxxxxxxx wrote:

> Use udf as the guard instruction for the restartable sequence abort
> handler.
> 
> Previously, the chosen signature was not a valid instruction, based
> on the assumption that it could always sit in a literal pool. However,
> there are compilation environments in which literal pools are not
> available, for instance execute-only code. Therefore, we need to
> choose a signature value that is also a valid instruction.
> 
> Handle compiling with -mbig-endian on ARMv6+, which generates binaries
> with mixed code vs data endianness (little endian code, big endian
> data).
> 
> Else mismatch between code endianness for the generated signatures and
> data endianness for the RSEQ_SIG parameter passed to the rseq
> registration will trigger application segmentation faults when the
> kernel try to abort rseq critical sections.
> 
> Prior to ARMv6, -mbig-endian generates big-endian code and data, so
> endianness should not be reversed in that case.

And of course it cannot be that easy. This breaks when building in
thumb mode (-mthumb). Output from librseq arm32 build [1] (code similar
to what is found in the rseq selftests):

  CC       rseq.lo
/tmp/ccu6Jw1b.s: Assembler messages:
/tmp/ccu6Jw1b.s:297: Error: cannot determine Thumb instruction size. Use .inst.n/.inst.w instead
/tmp/ccu6Jw1b.s:490: Error: cannot determine Thumb instruction size. Use .inst.n/.inst.w instead
Makefile:460: recipe for target 'rseq.lo' failed

This appears to be caused by a missing .arm directive in RSEQ_SIG_DATA.
Fixing with:

-               asm volatile ("b 2f\n\t"                                \
+               asm volatile (".arm\n\t"                                \
+                             "b 2f\n\t"                                \

gets the build to go further, but breaks at:

  CC       basic_percpu_ops_test.o
/tmp/ccpHOMHZ.s: Assembler messages:
/tmp/ccpHOMHZ.s:148: Error: misaligned branch destination
/tmp/ccpHOMHZ.s:956: Error: misaligned branch destination
Makefile:378: recipe for target 'basic_percpu_ops_test.o' failed

I suspect it's caused by the change from:

-               ".word " __rseq_str(RSEQ_SIG) "\n\t"                    \

to

+               ".arm\n\t"                                              \
+               ".inst " __rseq_str(RSEQ_SIG_CODE) "\n\t"               \

which changes the mode from thumb to arm for the rest of the
inline asm within __RSEQ_ASM_DEFINE_ABORT. Better yet, there appears
to be no way to save the arm/thumb state and restore it afterwards.

I'm really starting to wonder if we should go our of our way to try
to get this signature to be a valid instruction on arm32. Perhaps
we should consider going back to use ".word" on arm32 so it ensures
it uses data endianness (which matches the parameter received by the
sys_rseq system call), let objdump and friends print it as a literal
pool (which it is), and just choose an instruction which has little
chances to appear for the cases we care about between ARM32 BE, LE
and THUMB. Perhaps a 32-bit palindrome ? Bonus points if this is a
trap instruction in common configurations for odd-cases-debugging
purposes.

Thoughts ?

Thanks,

Mathieu

[1] https://github.com/compudj/librseq


> 
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
> CC: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> CC: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> CC: Joel Fernandes <joelaf@xxxxxxxxxx>
> CC: Catalin Marinas <catalin.marinas@xxxxxxx>
> CC: Dave Watson <davejwatson@xxxxxx>
> CC: Will Deacon <will.deacon@xxxxxxx>
> CC: Shuah Khan <shuah@xxxxxxxxxx>
> CC: Andi Kleen <andi@xxxxxxxxxxxxxx>
> CC: linux-kselftest@xxxxxxxxxxxxxxx
> CC: "H . Peter Anvin" <hpa@xxxxxxxxx>
> CC: Chris Lameter <cl@xxxxxxxxx>
> CC: Russell King <linux@xxxxxxxxxxxxxxxx>
> CC: Michael Kerrisk <mtk.manpages@xxxxxxxxx>
> CC: "Paul E . McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
> CC: Paul Turner <pjt@xxxxxxxxxx>
> CC: Boqun Feng <boqun.feng@xxxxxxxxx>
> CC: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
> CC: Steven Rostedt <rostedt@xxxxxxxxxxx>
> CC: Ben Maurer <bmaurer@xxxxxx>
> CC: linux-api@xxxxxxxxxxxxxxx
> CC: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
> CC: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> CC: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
> ---
> Changes since v1:
> - Fix checkpatch error and warning.
> 
> ---
> tools/testing/selftests/rseq/rseq-arm.h | 52 +++++++++++++++++++++++++++++++--
> 1 file changed, 50 insertions(+), 2 deletions(-)
> 
> diff --git a/tools/testing/selftests/rseq/rseq-arm.h
> b/tools/testing/selftests/rseq/rseq-arm.h
> index 5f262c54364f..84f28f147fb6 100644
> --- a/tools/testing/selftests/rseq/rseq-arm.h
> +++ b/tools/testing/selftests/rseq/rseq-arm.h
> @@ -5,7 +5,54 @@
>  * (C) Copyright 2016-2018 - Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
>  */
> 
> -#define RSEQ_SIG	0x53053053
> +/*
> + * RSEQ_SIG uses the udf A32 instruction with an uncommon immediate operand
> + * value 0x5de3. This traps if user-space reaches this instruction by mistake,
> + * and the uncommon operand ensures the kernel does not move the instruction
> + * pointer to attacker-controlled code on rseq abort.
> + *
> + * The instruction pattern in the A32 instruction set is:
> + *
> + * e7f5def3    udf    #24035    ; 0x5de3
> + *
> + * This translates to the following instruction pattern in the T16 instruction
> + * set:
> + *
> + * little endian:
> + * def3        udf    #243      ; 0xf3
> + * e7f5        b.n    <7f5>
> + *
> + * pre-ARMv6 big endian code:
> + * e7f5        b.n    <7f5>
> + * def3        udf    #243      ; 0xf3
> + *
> + * ARMv6+ -mbig-endian generates mixed endianness code vs data: little-endian
> + * code and big-endian data. Ensure the RSEQ_SIG data signature matches code
> + * endianness. Prior to ARMv6, -mbig-endian generates big-endian code and data
> + * (which match), so there is no need to reverse the endianness of the data
> + * representation of the signature. However, the choice between BE32 and BE8
> + * is done by the linker, so we cannot know whether code and data endianness
> + * will be mixed before the linker is invoked.
> + */
> +
> +#define RSEQ_SIG_CODE	0xe7f5def3
> +
> +#ifndef __ASSEMBLER__
> +
> +#define RSEQ_SIG_DATA							\
> +	({								\
> +		int sig;						\
> +		asm volatile ("b 2f\n\t"				\
> +			      "1: .inst " __rseq_str(RSEQ_SIG_CODE) "\n\t" \
> +			      "2:\n\t"					\
> +			      "ldr %[sig], 1b\n\t"			\
> +			      : [sig] "=r" (sig));			\
> +		sig;							\
> +	})
> +
> +#define RSEQ_SIG	RSEQ_SIG_DATA
> +
> +#endif
> 
> #define rseq_smp_mb()	__asm__ __volatile__ ("dmb" ::: "memory", "cc")
> #define rseq_smp_rmb()	__asm__ __volatile__ ("dmb" ::: "memory", "cc")
> @@ -78,7 +125,8 @@ do {									\
> 		__rseq_str(table_label) ":\n\t"				\
> 		".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
> 		".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, "
> 		__rseq_str(abort_ip) ", 0x0\n\t" \
> -		".word " __rseq_str(RSEQ_SIG) "\n\t"			\
> +		".arm\n\t"						\
> +		".inst " __rseq_str(RSEQ_SIG_CODE) "\n\t"		\
> 		__rseq_str(label) ":\n\t"				\
> 		teardown						\
> 		"b %l[" __rseq_str(abort_label) "]\n\t"
> --
> 2.11.0

-- 
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com