Re: [PATCH v3 0/5] arch: riscv: add board and SoC DT file support

[Paul Walmsley]

On Tue, 4 Jun 2019, Loys Ollivier wrote:

> On Sun 02 Jun 2019 at 01:04, Paul Walmsley <paul.walmsley@xxxxxxxxxx> wrote:
> 
> > Add support for building flattened DT files from DT source files under
> > arch/riscv/boot/dts.  Follow existing kernel precedent from other SoC
> > architectures.  Start our board support by adding initial support for
> > the SiFive FU540 SoC and the first development board that uses it, the
> > SiFive HiFive Unleashed A00.
> >
> > This third version of the patch set adds I2C data for the chip,
> > incorporates all remaining changes that riscv-pk was making
> > automatically, and addresses a comment from Rob Herring
> > <robh@xxxxxxxxxx>.
> >
> > Boot-tested on v5.2-rc1 on a HiFive Unleashed A00 board, using the
> > BBL and open-source FSBL, with modifications to pass in the DTB
> > file generated by these patches.
> >
> > This patch series can be found, along with the PRCI patch set
> > and the DT macro prerequisite patch, at:
> >
> > https://github.com/sifive/riscv-linux/tree/dev/paulw/dts-v5.2-rc1
> 
> Tested patch 1, 4 and 5 using FSBL + OpenSBI + U-Boot on HiFive Unleashed.
> Tested-by: Loys Ollivier <lollivier@xxxxxxxxxxxx>

Thanks very much for your testing!


- Paul